Course in Certification Processes for Aeronautical Engines
300 h online course in certification processes for aeronautical engines. 6 modules covering CS-E (EASA, engine certification specifications), 14 CFR Part 33 (FAA, engine airworthiness) and GasTurb. Assigned tutor and open enrolment.
Course in Certification Processes for Aeronautical Engines — studying from Ireland
Ireland maintains a small defence force, the Defence Forces, which operates its own engineering corps and equipment maintenance capabilities. Defence procurement and development are handled through the Department of Defence, while much of the wider defence-related industrial activity involves dual-use technologies, electronics and communications systems supplied by domestic and international firms. Engineers in this area typically work on land vehicle maintenance, military communications, protective equipment and systems integration. Policy and procurement are governed by national and European frameworks, including EU defence initiatives.
Fees for Ireland: €546 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Which Irish bodies oversee defence engineering and does a private qualification count?
Defence in Ireland is overseen by the Department of Defence, and the Defence Forces run their own training and technical structures. Engineers Ireland sets general professional engineering standards. SEIUM's qualifications are private and not state-awarded, and they are not accredited by any national body, so recognition for any defence-related role is decided by the relevant authority or employer.
Do Irish defence and land-systems employers hire people with private online qualifications?
Irish defence-related hiring is limited and often subject to security vetting and specific qualification requirements, so employers set their own criteria. A private online qualification may be taken into account alongside experience, but we cannot say how any employer will view it or guarantee any result. Check requirements for particular roles directly.
Can I study this from Ireland while working, and what is the workload?
Yes, the programme is 100% online and taught in English, so you can study from home without travel or a student visa. Master's programmes total 1,900 hours, postgraduate diplomas 800 and specialist courses 300. Each student has an assigned technical tutor, fees can be paid in instalments, and employer sponsorship may be possible. Plan your weekly hours realistically around your job.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the certification framework for aeronautical engines.
Identify the design analyses required by certification specifications.
Plan a certification test campaign.
Apply emissions and noise requirements.
Analyse production conformity and aircraft installation.
Manage the continued airworthiness of the engine in service.
Prepare the certification plan for an engine.
Who it's for
- Engine certification engineer wishing to specialise in certification processes for aeronautical engines.
- Propulsion test engineer wishing to specialise in certification processes for aeronautical engines.
- Engine performance engineer wishing to specialise in certification processes for aeronautical engines.
- Airworthiness engineer wishing to specialise in certification processes for aeronautical engines.
- Engine-aircraft integration engineer wishing to specialise in certification processes for aeronautical engines.
- Aeronautical emissions specialist wishing to specialise in certification processes for aeronautical engines.
- Graduates in engineering or science seeking to enter the aerospace industry.
What you'll work with
- CS-E (EASA, engine certification specifications)
- 14 CFR Part 33 (FAA, engine airworthiness)
- Regulation (EU) 2018/1139 (common rules in civil aviation)
- Regulation (EU) No 748/2012 (Part 21)
- ICAO Annex 16, Volume II (engine emissions)
- ICAO Annex 16, Volume I (noise)
6 modules · 300 h
1.1Engine type certificate and its scope1.2Separation between engine, propeller and aircraft1.3Authorities and mutual acceptance1.4Certification requirements applicable to engines1.5Guidance on acceptable means of compliance1.6Approved design and production organisations1.7Process milestones and relationship with the authority1.8Engine certification file documentation1.9Field vocabulary and acronyms1.10Exercise: engine requirements matrix
2.1Definition of operating regimes and declared limits2.2Integrity analysis of rotating parts2.3Critical elements and their process control2.4Failure and containment analysis2.5Safety analysis of the control system2.6Electronic engine control and its criticality2.7Lubrication and fuel systems2.8Materials, special processes and their justification2.9Life limits and damage tolerance2.10Practice: justifying a declared limit
3.1Endurance and durability testing3.2Starting, acceleration and response tests3.3Water and hail ingestion testing3.4Bird ingestion testing3.5Blade loss and containment testing3.6Vibration and stress testing3.7Extreme temperature and altitude testing3.8Calibration and performance measurement3.9Instrumentation and bench data acquisition3.10Practice: designing the test programme
4.1Aeronautical engine emissions standards4.2Smoke and gas measurement4.3Noise measurement procedures4.4Acoustic certification and its measurement points4.5Fuels and their effect on emissions4.6Compatibility with sustainable fuels4.7Environmental data declaration4.8Monitoring compliance in production4.9Foreseeable evolution of requirements4.10Practice: environmental file for an engine
5.1Production conformity and its monitoring5.2Acceptance of series-production engines5.3Aircraft installation and interface requirements5.4Installation manual and limitations5.5Instructions for continued airworthiness5.6Overhaul and approved repair5.7In-service performance monitoring5.8Service bulletins and directives5.9Occurrence investigation and corrective actions5.10Practice: in-service monitoring plan
6.1Choice of engine and its application6.2Certification requirements matrix6.3Declared limits and their justification6.4Integrity and safety analysis6.5Complete test programme6.6Environmental file6.7Production conformity plan6.8Continued airworthiness instructions6.9File report6.10Project defence
How you'll learn
Fully 100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is GasTurb, NPSS, ANSYS Fluent, MATLAB, in free, academic or evaluation versions. Tests are studied using real engine test bench procedures, planning of certification campaigns and analysis of emissions data. Assessment is continuous by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the certification framework for aeronautical engines.
Identify the design analyses required by certification specifications.
Plan a certification test campaign.
Apply emissions and noise requirements.
Analyse production conformity and aircraft installation.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
You work with GasTurb, NPSS, ANSYS Fluent and MATLAB. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM Institute diploma on passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Course in Export Control and Academic Compliance
Online Course of 300 hours in export control and academic compliance. 6 modules covering Regulation (EU) 2021/821 (dual-use items), Recommendation (EU) 2021/1700 (research compliance programmes) and…
ISO/IEC Certification Course for Armoured Vehicle Factories
Online 300-hour course in ISO/IEC certification for armoured vehicle factories. 6 modules covering ISO 9001 (quality management systems), ISO/IEC 17025 (laboratory competence) and Minitab. Assigned tutor…
Course in Ethics in Ethical and Academic Certification
Online 300-hour course in Ethics in Ethical and Academic Certification. 6 modules covering the European Code of Conduct for Research Integrity (ALLEA), ISO 37301 (compliance management…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships