Apply now
CourseRestoration & Classics Applications open

GD&T Tolerancing Course Applied to Classic Vehicles

Online 300-hour course in GD&T tolerancing applied to classic vehicles. 6 modules covering ISO 1101 (geometrical specification: form, orientation and position tolerances), ASME Y14.5-2018 (dimensioning and geometric tolerancing) and PC-DMIS. Assigned tutor and open enrolment.

Duration300 h
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute certificate
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Interpret tolerances and fits on old parts and period drawings.

02

Apply the fundamentals of GD&T geometrical dimensioning.

03

Dimension classic vehicle parts with functional tolerances.

04

Measure and verify parts using conventional instruments and coordinate measuring machines.

05

Carry out reverse engineering of a discontinued part.

06

Translate drawings using older standards into current specifications.

07

Implement dimensional control in the restoration workshop.

Profile

Who it's for

  • Dimensional metrology technician looking to specialise in GD&T tolerancing applied to classic vehicles.
  • Reverse engineering engineer looking to specialise in GD&T tolerancing applied to classic vehicles.
  • Draughtsman of reproduction parts looking to specialise in GD&T tolerancing applied to classic vehicles.
  • Quality inspector looking to specialise in GD&T tolerancing applied to classic vehicles.
  • Precision machining technician looking to specialise in GD&T tolerancing applied to classic vehicles.
  • Quality manager in spare parts manufacturing looking to specialise in GD&T tolerancing applied to classic vehicles.
  • Graduates in engineering or sciences seeking to enter the reproduction spare parts manufacturing sector.
Standards & tools

What you'll work with

  • ISO 1101 (geometrical specification: form, orientation and position tolerances)
  • ASME Y14.5-2018 (dimensioning and geometric tolerancing)
  • ISO 5459 (datums and datum systems)
  • ISO 286-1 (ISO system of limits and fits)
  • ISO 2768-1 (general tolerances)
  • ISO 8015 (fundamental GPS principles)
  • ISO 10360-2 (acceptance tests for coordinate measuring machines)
Syllabus

6 modules · 300 h

  1. 1.1Why an old part is not an imprecise part
  2. 1.2Standardised tolerance systems
  3. 1.3Clearance, interference and transition fits
  4. 1.4Period tolerances and their current equivalence
  5. 1.5Reading an old drawing
  6. 1.6Units: millimetres and inches
  7. 1.7Relationship between tolerance and surface finish
  8. 1.8Reference documentation for the model
  9. 1.9Required measuring instruments
  10. 1.10Workshop: interpreting a period drawing
  1. 2.1Difference from linear dimensioning
  2. 2.2Form, orientation, position and runout elements
  3. 2.3Standardised symbology
  4. 2.4Feature control frames and how to read them
  5. 2.5Datums and datum systems
  6. 2.6Maximum material condition
  7. 2.7Advantages over symmetrical tolerances
  8. 2.8Applicable standards
  9. 2.9Common interpretation errors
  10. 2.10Practice: reading feature control frames
  1. 3.1Flatness of cylinder heads and blocks
  2. 3.2Cylindricity of cylinders and bedplates
  3. 3.3Concentricity of shafts and bushes
  4. 3.4Perpendicularity of bearing surfaces
  5. 3.5Parallelism of machined faces
  6. 3.6Position of holes and dowels
  7. 3.7Symmetry in bodywork parts
  8. 3.8Runout of discs and bell housings
  9. 3.9Realistic acceptance criteria
  10. 3.10Practice: defining tolerances for a part
  1. 4.1Callipers, micrometer and dial gauge
  2. 4.2Surface plate, height gauge and dial test indicator
  3. 4.3Bore gauge and internal measurement
  4. 4.4Gauges and reference standards
  5. 4.5Coordinate measuring machine
  6. 4.6Measurement without an original drawing
  7. 4.7Temperature and its effect on measurement
  8. 4.8Measurement uncertainty
  9. 4.9Recording measurements
  10. 4.10Practice: complete dimensional verification
  1. 5.1Systematic dimensional survey
  2. 5.2Determining reasonable tolerances
  3. 5.33D scanning and point clouds
  4. 5.4Model reconstruction
  5. 5.5Comparison between model and part
  6. 5.6Decisions on fits and clearances
  7. 5.7Resulting manufacturing drawing
  8. 5.8Validation with the fitted part
  9. 5.9Documentation of the process
  10. 5.10Practice: dimensioned drawing of a part without documentation
  1. 6.1Specification for the machining workshop
  2. 6.2Incoming part inspection
  3. 6.3Dimensional report
  4. 6.4Measurement traceability
  5. 6.5Staff training
  6. 6.6Cost of quality control
  7. 6.7Common errors and rejections
  8. 6.8Supplier relations
  9. 6.9Documented real cases
  10. 6.10Final project: dimensional file for a restored part
Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the programme with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is PC-DMIS, Zeiss Calypso, PolyWorks, SolidWorks, Geomagic Design X, in free, academic or evaluation versions. Tests are studied using real measurement procedures on a coordinate measuring machine, 3D scanning for reverse engineering, and verification with gauges and dial indicators. Assessment is continuous by module, plus the final integrating project.

Accredited laboratories(EN ISO/IEC 17025) with a rotor test rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-based Master's Thesis:safety case, test plan, compliance dossier and operational limits.
Industry mentoring:lecturers with careers in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with ciber-OT, DIH and compliance as its pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Specification for the machining workshop

Interpret tolerances and fits on old parts and period drawings.

Incoming part inspection

Apply the fundamentals of GD&T geometrical dimensioning.

Dimensional report

Dimension classic vehicle parts with functional tolerances.

Measurement traceability

Measure and verify parts using conventional instruments and coordinate measuring machines.

Staff training

Carry out reverse engineering of a discontinued part.

Career opportunities

Where this takes you

Dimensional metrology technicianReverse engineering engineerDraughtsman of reproduction partsQuality inspectorPrecision machining technicianQuality manager in spare parts manufacturing
Admissions & scholarships

Requirements

  • No prior degree is required.
  • Internet connection and a computer capable of running the programme's software.
  • Sufficient level of Spanish to follow technical standards documentation.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme consists of 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.

You will work with PC-DMIS, Zeiss Calypso, PolyWorks, SolidWorks and Geomagic Design X. Free, academic or evaluation versions are used, and the tutor will indicate a free alternative where one exists.

A SEIUM diploma upon passing the continuous assessment and the integrating project. This is SEIUM's own training, not an official qualification from the Ministry.

Yes. Modules passed in a course or postgraduate diploma in the same area can be recognised in the advanced programme. Please check the recognition policy when you enrol.

Keep exploring

Related programmes

See all in Restoration & Classics
Course610 $

Historic Vehicle Registration in LATAM Course

Online 300-hour course in historic vehicle registration in LATAM. 6 modules covering Traffic Law 24.449 (Argentina), Law 769 of 2002, National Traffic Code (Colombia) and advanced…

300 hOnlineRestoration & Classics
Course890 $

Course in Fire Management in Historic Collections

Online 300-hour course in fire management in historic collections. 6 modules covering NFPA 909 (protection of cultural resources: museums and libraries), Royal Decree 513/2017 (Regulation on…

300 hOnlineRestoration & Classics
Course500 $

Course in Strategies for Regularity Rallies

Online 300-hour course in strategies for regularity rallies. 6 modules covering the FIA International Sporting Code, the FIVA Event Code and advanced Excel. Assigned tutor and…

300 hOnlineRestoration & Classics
GD&T Tolerancing Course Applied to Classic VehiclesEnrol
Related programmes

More in Restoration & Classics

Classic Batteries Course: Restoration and CompatibilityView programme →Safe and Legal HV Conversions for Classic Cars CourseView programme →Course in Rust Removal from Vintage ChassisView programme →English Wheel Forming Course: Step by StepView programme →Chrome Plating Course: Decorative and Technical Chrome for Classic CarsView programme →Course on Safety Standards for Sensitive MaterialsView programme →

All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.