Course on Cybersecurity Regulation for Nuclear Robots
Online course of 300 h in Cybersecurity Regulation for Nuclear Robots. 6 modules covering IEC 62645 (cybersecurity of I&C systems in nuclear power plants), IAEA NSS No. 17-T (Rev.1) (computer security at nuclear facilities) and Microsoft Threat Modeling Tool. Dedicated tutor and enrolment open.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the cyber threats specific to robotic systems in nuclear environments.
Interpret the cybersecurity regulatory framework applicable to nuclear facilities.
Apply the principles of the IEC 62443 series to a robotic architecture.
Design a robot architecture with defence in depth and security zones.
Evaluate vulnerabilities and prioritise mitigation measures.
Define incident detection and response procedures.
Draw up a cybersecurity plan for a robot intended for a nuclear facility.
Who it's for
- Industrial cybersecurity engineer looking to specialise in Cybersecurity Regulation for Nuclear Robots.
- Nuclear I&C systems security specialist looking to specialise in Cybersecurity Regulation for Nuclear Robots.
- Cyber risk analyst looking to specialise in Cybersecurity Regulation for Nuclear Robots.
- Cybersecurity compliance consultant looking to specialise in Cybersecurity Regulation for Nuclear Robots.
- Secure robotics engineer looking to specialise in Cybersecurity Regulation for Nuclear Robots.
- Control systems security auditor looking to specialise in Cybersecurity Regulation for Nuclear Robots.
- Engineering or science graduates looking to move into the nuclear industry.
What you'll work with
- IEC 62645 (cybersecurity of I&C systems in nuclear power plants)
- IAEA NSS No. 17-T (Rev.1) (computer security at nuclear facilities)
- IEC 62443 (security for industrial automation systems)
- IEC 63096 (security controls for nuclear I&C systems)
- Directive (EU) 2022/2555 (NIS2)
- Regulation (EU) 2024/2847 (Cyber Resilience Act)
- ISO 10218-1 (safety of industrial robots)
- ISO/IEC 27001 (information security management systems)
6 modules · 300 h
1.1The attack surface of a robot1.2Vulnerabilities in ROS and ROS 21.3Sensor spoofing and jamming1.4Teleoperation tampering1.5Industrial malware: the Stuxnet case1.6Insider threat in nuclear facilities1.7Component supply chain1.8Radiological consequences of an attack1.9MITRE ATT&CK for control systems1.10Case study: threat modelling of an inspection robot
2.1IAEA guides NSS 17-T and NSS 33-T2.2IEC 62645 and IEC 630962.310 CFR 73.54 and RG 5.712.4NEI guidance 08-092.5National regulators' computer security requirements2.6Critical infrastructure protection legislation2.7The NIS2 and CER directives2.8Computer security design basis threat2.9Graded approach by security levels2.10Workshop: security levels for robotic functions
3.1IEC 62443-3-3: system requirements3.2IEC 62443-4-2: component requirements3.3Security levels (SL)3.4Secure lifecycle according to IEC 62443-4-13.5The EU Cyber Resilience Act3.6The Machinery Regulation and cybersecurity3.7SROS2 and security in ROS 23.8Product certification3.9ENISA guidelines3.10Practice: IEC 62443-4-2 gap analysis of a controller
4.1Computer security defence in depth4.2Zones and conduits4.3Authentication and access control4.4Encryption of teleoperation links4.5Secure boot and signed firmware4.6Patching in qualified environments4.7Logging and monitoring4.8Removable media and maintenance access4.9Isolated versus connected robots4.10Lab: hardening a ROS 2 node with SROS2
5.1Computer security risk assessment5.2Penetration testing in OT environments5.3Tabletop exercises5.4Incident response5.5Notification to the regulator5.6Forensic analysis5.7Integration with physical security5.8Training and security culture5.9Audits and inspections5.10Case study: tabletop exercise on an attack on teleoperation
6.1Description of the robotic system6.2Threat analysis6.3Security level classification6.4Zones and conduits architecture6.5Technical and organisational controls6.6Incident response plan6.7Compliance matrix6.8Verification plan6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake period, making it easy to combine with work.
Each module combines theory, guided reading of the original standards and applied exercises. The software used is Microsoft Threat Modeling Tool, Wireshark, ROS 2 (SROS2), Nessus, in free, academic or trial versions. Testing is studied through real procedures from threat modelling of a robotic system, analysis of a segmented network architecture, incident response exercises in a lab environment. Assessment is continuous for each module, plus a final capstone project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the cyber threats specific to robotic systems in nuclear environments.
Interpret the cybersecurity regulatory framework applicable to nuclear facilities.
Apply the principles of the IEC 62443 series to a robotic architecture.
Design a robot architecture with defence in depth and security zones.
Evaluate vulnerabilities and prioritise mitigation measures.
Where this takes you
Requirements
- No previous qualification is required.
- An internet connection and a computer able to run the programme software.
- A level of English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with Microsoft Threat Modeling Tool, Wireshark, ROS 2 (SROS2), Nessus. Free, academic or trial versions are used, and your tutor will point out a free alternative where one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the capstone project. It is SEIUM's own qualification, not an official state-accredited degree.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Check the credit recognition policy when you enrol.
Related programmes
Course on Collaborative Robots in Nuclear Laboratories
Online course of 300 h in Collaborative Robots in Nuclear Laboratories. 6 modules covering ISO 10218-1 and 10218-2 (safety of industrial robots), ISO/TS 15066 (collaborative robots)…
Course on Exoskeleton Design for Nuclear Maintenance
Online course of 300 h in Exoskeleton Design for Nuclear Maintenance. 6 modules covering ISO 13482 (personal care robots), Directive 2006/42/EC (machinery) and OpenSim. Dedicated tutor…
Course in Reactor Instrumentation and Control Systems
Online 300-hour course in reactor instrumentation and control systems. 6 modules covering IEC 61513 (I&C for nuclear power plants: general requirements), IEC 60880 (software for category…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships