Postgraduate Diploma in Resilience and Contingency Plans
800-hour online Postgraduate Diploma in Resilience and Contingency Plans. 8 modules covering ISO 22301 (business continuity management systems), ISO 22320 (emergency management) and advanced Excel. Assigned tutor and enrolment open.
Postgraduate Diploma in Resilience and Contingency Plans — studying from Canada
Canada's infrastructure needs drive significant civil engineering activity, from highways and bridges to urban transit and water systems. Major transit projects in Toronto, Montréal, Vancouver and Calgary involve rail, tunnelling and smart city technologies. Rail operators and suppliers, including Canadian Pacific Kansas City and Canadian National, depend on engineering expertise in track, signalling and structures. Provincial ministries of transportation and municipal engineering departments are key employers, alongside consulting firms.
Fees for Canada: C$1,400 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Who regulates civil engineering titles in Canada, and does SEIUM count?
Civil engineers in Canada are typically licensed as Professional Engineers by provincial associations, such as Engineers Canada's member bodies, which set licensing requirements including accredited education and experience. SEIUM is a private institute, and its qualifications are not official state degrees or accredited by a national body. They do not by themselves grant a P.Eng. licence, so check with the relevant association.
Are these qualifications useful to rail or smart city employers in Canada?
Canada has significant rail, transit and urban infrastructure work, including major projects in Ontario, Quebec and British Columbia. Public agencies and consultancies usually prioritise licensed engineers and verifiable experience. A SEIUM qualification may complement your profile, but whether it is recognised is for each employer to decide, so it is worth asking them before you commit.
Can I study part-time while working, and is employer funding possible?
Yes, the programmes are 100% online, so you can study from home without a student visa and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, and an assigned technical tutor supports you. Fees can be paid in instalments, and employer sponsorship is possible, depending on your employer's policies.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the concept of resilience as applied to urban systems.
Identify and analyse threats and risks to essential services.
Carry out business impact analysis and define continuity strategies.
Draft operational contingency plans.
Organise emergency and crisis management with clear command structures.
Incorporate resilient design criteria into infrastructure.
Develop a resilience plan with an exercise and improvement cycle.
Who it's for
- Business continuity manager looking to specialise in Resilience and Contingency Planning.
- Emergency manager looking to specialise in Resilience and Contingency Planning.
- Urban resilience consultant looking to specialise in Resilience and Contingency Planning.
- Critical infrastructure risk analyst looking to specialise in Resilience and Contingency Planning.
- Civil protection technician looking to specialise in Resilience and Contingency Planning.
- Crisis management coordinator looking to specialise in Resilience and Contingency Planning.
- Graduates in engineering or sciences seeking to enter urban services and utilities.
What you'll work with
- ISO 22301 (business continuity management systems)
- ISO 22320 (emergency management)
- Directive (EU) 2022/2557 (resilience of critical entities)
- ISO 31000 (risk management)
- ISO 22313 (business continuity guidance)
- Law 8/2011 (protection of critical infrastructure)
- Law 17/2015 on the National Civil Protection System
8 modules · 800 h
1.1Concepts of resilience, robustness and redundancy1.2Functionality and recovery curve1.3Critical infrastructure and essential services1.4Network interdependencies1.5Sendai Framework for Disaster Risk Reduction1.6Directive (EU) 2022/2557 on the resilience of critical entities1.7Law 8/2011 on critical infrastructure1.8Urban resilience indices1.9100 Resilient Cities programme1.10Case study: interdependency map of a city
2.1Natural and technological hazards2.2Risk management according to ISO 310002.3Failure mode analysis2.4Fault and event trees2.5Cascading impact scenarios2.6Network vulnerability analysis2.7Risk matrices2.8Climate and extreme risks2.9Cyber risks2.10Workshop: analysis of cascading scenarios
3.1Management systems according to ISO 223013.2Business impact analysis3.3Recovery time objectives3.4Continuity strategies3.5Minimum resources and critical suppliers3.6Process-level continuity plans3.7Alternative sites and backup3.8Testing and exercises3.9Continuous improvement3.10Practice: impact analysis of a transport service
4.1Structure of a contingency plan4.2Alert levels and activation4.3Operational response procedures4.4Roles and responsibilities4.5Self-protection plans under Royal Decree 393/20074.6Operator security plan4.7Emergency resource management4.8Service restoration4.9End of emergency and return to normality4.10Case study: contingency plan for a power outage
5.1National Civil Protection System5.2Law 17/2015 on civil protection5.3Regional and special plans5.4Coordination centres5.5Crisis communication5.6Volunteer and support management5.7Inter-administrative coordination5.8Public alert systems5.9Information management in crises5.10Practice: cabinet simulation exercise
6.1Redundancy and diversity in networks6.2Performance-based design for extreme events6.3Structural robustness and progressive failure6.4Resilience of urban electricity networks6.5Resilience of water supply6.6Transport resilience6.7Digital infrastructure and communications6.8Nature-based solutions6.9Cost-benefit analysis of resilience6.10Workshop: resilience measures for a substation
7.1Post-event investigation7.2Lessons learned from major blackouts7.3Operational resilience indicators7.4Plan audits7.5Full-scale exercises7.6Staff training7.7Knowledge management7.8Plan review after changes7.9Culture of resilience in the organisation7.10Practice: lessons-learned report
8.1System definition and scope8.2Threat and interdependency analysis8.3Risk and impact assessment8.4Business impact analysis8.5Resilience and continuity strategies8.6Drafting the contingency plan8.7Exercise and training programme8.8Monitoring indicators8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is advanced Excel, QGIS, Power BI, BCM tools (Fusion, Castellan), Microsoft Project, in free, academic or evaluation versions. Assignments are based on real business impact analysis procedures, tabletop simulation exercises and audits of contingency plans. Assessment is continuous across each module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the concept of resilience as applied to urban systems.
Identify and analyse threats and risks to essential services.
Carry out business impact analysis and define continuity strategies.
Draft operational contingency plans.
Organise emergency and crisis management with clear command structures.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish-language proficiency to follow technical regulations.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with advanced Excel, QGIS, Power BI, BCM tools (Fusion, Castellan) and Microsoft Project. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma on passing continuous assessment and the final integrating project. This is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the advanced programme. Consult the recognition policy when you enrol.
Related programmes
Diploma in Parametric Automation with Dynamo/Grasshopper
Online postgraduate diploma of 800 hours in parametric automation with Dynamo/Grasshopper. 8 modules covering parametric design and algorithmic thinking, Dynamo for Revit, Grasshopper and Rhino, applied…
Postgraduate Diploma in Alternative Water Harvesting (Fog and Urban Rainwater)
800-hour online Postgraduate Diploma in Alternative Water Harvesting (fog and urban rainwater). 8 modules covering UNE-EN 16941-1 (on-site rainwater harvesting systems), Directive 2000/60/EC (Water Framework Directive)…
Diploma in Design of Cable-Stayed and Extradosed Bridges
Online postgraduate diploma of 800 hours in cable-stayed and extradosed bridge design, structured in 8 modules covering bridge typologies, stay cables and anchorage systems, structural analysis,…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships