Postgraduate Diploma in PLC/Robot Emulation and FAT Testing
Online Postgraduate Diploma of 800 hours in PLC/Robot Emulation and FAT Testing. 8 modules with IEC 61131-3, IEC 62714 AutomationML and Siemens PLCSIM Advanced. Assigned tutor and open enrolment.
Postgraduate Diploma in PLC/Robot Emulation and FAT Testing — studying from Canada
Canada has a notable robotics and automation sector, with research leadership at institutions such as McGill University, the University of Toronto and the University of Waterloo. Industrial automation firms and integrators serve manufacturing, automotive and resource industries across Ontario, Québec and Alberta. The Canadian Space Agency's robotic systems contribute to space robotics expertise. Engineers work on control systems, industrial robots, mechatronics and automation integration.
Fees for Canada: C$2,330 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for robotics and control engineering?
SEIUM's qualifications are private, not official state degrees, and are not accredited by any national body in Canada. Professional engineering titles are regulated provincially, for example by Professional Engineers Ontario, and engineering graduates in Canada typically pursue licensure through these bodies. Recognition of a private qualification is decided by employers or the relevant body.
Where could this qualification help in Canada's robotics and automation job market?
Canadian employers in manufacturing, logistics, aerospace, mining and automation integration may hire for robotics and control skills. Whether they value a private qualification is their decision, and many also weigh portfolios, experience and recognised credentials. The final project can demonstrate applied ability, though it does not guarantee any job.
How can I study this while working full time in Canada?
The programme is entirely online and taught in English, so you can study from home across Canadian time zones, and no student visa is needed. Choose from 300-hour specialist courses, 800-hour postgraduate diplomas or 1,900-hour master's programmes. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Distinguish between emulation and simulation in automation projects.
Configure virtual PLCs connected to plant models.
Programme and emulate robots with virtual controllers.
Build 3D models with physical behaviour and sensors.
Run virtual FAT tests with traceable evidence.
Plan the virtual commissioning of cells and lines.
Standardise emulated components for reuse.
Who it's for
- Virtual commissioning engineer looking to specialise in PLC/Robot Emulation and FAT Testing.
- PLC and robot programmer looking to specialise in PLC/Robot Emulation and FAT Testing.
- Process simulation engineer looking to specialise in PLC/Robot Emulation and FAT Testing.
- Commissioning technician looking to specialise in PLC/Robot Emulation and FAT Testing.
- Robotic systems integrator looking to specialise in PLC/Robot Emulation and FAT Testing.
- Automation validation engineer looking to specialise in PLC/Robot Emulation and FAT Testing.
- Engineering or science graduates looking to enter the automotive sector.
What you'll work with
- IEC 61131-3
- IEC 62714 AutomationML
- FMI 3.0
- VDI 3693 Blatt 1
- IEC 62381:2012
- ISO 10218-2:2025
- IEC 60204-1:2016
8 modules · 800 h
1.1The concept of emulation versus simulation1.2Virtual PLCs and controller emulators1.3Robot emulation with a virtual controller1.4Behavioural models of peripherals1.5Advantages for commissioning1.6Fidelity required by use case1.7Market tools1.8Cost and return on the commissioning digital twin1.9Limitations compared with real equipment1.10Case study: analysis of delays in a real commissioning
2.1Siemens PLCSIM Advanced2.2Emulate3D and Studio 5000 Logix Emulate2.3CODESYS Control Win2.4Virtual communication interfaces2.5Cycle and time synchronisation2.6Emulation of distributed I/O2.7PROFINET network emulation2.8Debugging in an emulated environment2.9Timing limitations2.10Laboratory: connecting PLCSIM Advanced with a plant model
3.1ABB RobotStudio and the virtual controller3.2KUKA.Sim and Office Lite3.3Fanuc ROBOGUIDE3.4Offline trajectory programming3.5Signals between robot and PLC3.6Estimated cycle times3.7Collision detection3.8Calibration between virtual and real3.9Exporting programs to the plant3.10Practice: cell with virtual robot and emulated PLC
4.1CAD import and simplification4.2Kinematics of mechanisms4.3Virtual sensors and detection4.4Conveyors and material flow4.5Part physics and gravity4.6Pneumatic and electric actuators4.7Library of reusable components4.8Model performance4.9Tools such as Process Simulate and Visual Components4.10Workshop: conveyor model with virtual sensors
5.1FAT protocols and their virtual adaptation5.2Sequence and mode testing5.3Alarm and fault testing5.4HMI testing with operators5.5Validation of cycle times5.6Remote participation of the client5.7Recording test evidence5.8Management of non-conformities5.9Relationship between virtual and real FAT5.10Practice: virtual FAT of an assembly station
6.1Planning virtual commissioning6.2Integration of PLC, robot, HMI and model6.3Fault and recovery scenarios6.4Safety testing in a virtual environment6.5Operator training and maintenance6.6Transfer to the plant6.7Measuring time reductions6.8Team organisation6.9Common errors when virtualising6.10Case study: virtual commissioning of a welding line
7.1Modelling standards for components7.2AutomationML as an exchange format7.3FMI for behavioural models7.4Corporate libraries and governance7.5Model version control7.6Acceptable fidelity criteria7.7Reuse across projects7.8Supplier requirements7.9Documentation of the commissioning digital twin7.10Workshop: corporate template for an emulated component
8.1Description of the cell or line8.23D and behavioural model8.3Emulated PLCs and robots8.4Integration and communication8.5Virtual FAT protocol8.6Test execution and results8.7Evaluation against real commissioning8.8Improvement proposals8.9Report and presentation8.10Final review with the tutor
How you'll learn
Fully 100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Siemens PLCSIM Advanced, Siemens Process Simulate, ABB RobotStudio, Visual Components, Rockwell Emulate3D, in free, academic or evaluation versions. Tests are studied using real virtual FAT procedures for a robotic station, integration of an emulated PLC with a 3D model, and validation of cycle times before commissioning. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Distinguish between emulation and simulation in automation projects.
Configure virtual PLCs connected to plant models.
Programme and emulate robots with virtual controllers.
Build 3D models with physical behaviour and sensors.
Run virtual FAT tests with traceable evidence.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with Siemens PLCSIM Advanced, Siemens Process Simulate, ABB RobotStudio, Visual Components and Rockwell Emulate3D. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM upon passing continuous assessment and the integrating project. It is in-house training, not an official title from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Grasp and Complex Trajectory Planning
800-hour online Postgraduate Diploma in Grasp and Complex Trajectory Planning. 8 modules covering ISO 10218-1, ISO 10218-2 and ROS 2 with MoveIt 2. Dedicated tutor and…
Postgraduate Diploma in Control of Soft Grippers and Tactile Perception
Online 800-hour Postgraduate Diploma in Control of Soft Grippers and Tactile Perception. 8 modules covering ISO 10218-1, Reglamento (CE) n.º 1935/2004 and ROS 2. Assigned tutor…
Postgraduate Diploma in OEE KPIs and Production What-If Analysis
Online 800-hour Postgraduate Diploma in OEE KPIs and Production What-If Analysis. 8 modules covering ISO 22400-1:2014, ISO 22400-2:2014 and Siemens Plant Simulation. Dedicated tutor and open…
More in Robotics, Automation & Control
All Robotics, Automation & Control programmes → · How to apply · Fees & financing · Scholarships