Diploma in Validation of Military Medical Systems
Online postgraduate diploma of 800 hours in the validation of military medical systems. 8 modules covering medical devices in defence, risk and quality management to ISO 14971 and ISO 13485, design verification to IEC 60601-1, military environmental testing to MIL-STD-810H, clinical and usability validation, connected devices and regulation, with an assigned technical tutor.
Diploma in Validation of Military Medical Systems — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$2,330 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the requirements for medical devices in defence.
Apply risk and quality management systems.
Plan design verification in line with standards.
Design environmental tests for military environments.
Validate usability and clinical performance.
Validate software and connected medical devices.
Apply the regulatory and ethical framework to procurement.
Who it's for
- Medical device validation engineers moving into military healthcare.
- Regulatory affairs specialists handling CE marking and MDR compliance.
- Biomedical engineers working on field and transport equipment.
- Healthcare quality managers responsible for ISO 13485 systems.
- Environmental test engineers applying MIL-STD-810H to medical equipment.
- Usability specialists testing devices with clinical users.
- Engineering or science graduates seeking to enter military healthcare.
What you'll work with
- Regulation (EU) 2017/745 (medical devices)
- ISO 13485:2016 (quality management systems for medical devices)
- ISO 14971:2019 (risk management for medical devices)
- IEC 60601-1 (safety of medical electrical equipment)
- MIL-STD-810H (environmental engineering considerations and laboratory tests)
- IEC 62366-1 (usability engineering)
- IEC 62304 (medical device software life cycle)
- Greenlight Guru
- MATLAB
- LabVIEW
- Jama Connect
- Python SciPy
8 modules
1.1Military medicine and medical equipment1.2Medical devices in austere environments1.3Field and evacuation equipment1.4Devices on aircraft and ships1.5Extreme environmental requirements1.6Classification of medical devices1.7The European Medical Device Regulation1.8Exemptions and emergency use1.9Product life cycle1.10Case study: requirements for a transport ventilator
2.1ISO 14971 risk management2.2ISO 13485 quality management2.3Clinical hazard analysis2.4Design controls2.5Requirements traceability2.6Supplier management2.7Corrective and preventive actions2.8Quality audits2.9Technical documentation2.10Workshop: risk analysis of a patient monitor
3.1Verification plan3.2Electrical safety to IEC 60601-13.3Electromagnetic compatibility to IEC 60601-1-23.4Transport equipment to IEC 60601-1-123.5Essential performance3.6Software testing to IEC 623043.7Biocompatibility to ISO 109933.8Packaging tests3.9Test reports3.10Laboratory: electrical safety test
4.1MIL-STD-810H and its application4.2Vibration and shock4.3Temperature and humidity4.4Altitude and decompression4.5Sand, dust and rain4.6Aircraft compatibility to RTCA DO-1604.7Drop tests4.8Mission profiles4.9Test tailoring4.10Practical exercise: environmental test plan for a defibrillator
5.1Validation versus verification5.2Clinical evaluation5.3Clinical investigations to ISO 141555.4Usability engineering to IEC 623665.5Testing with healthcare users5.6Use with protective equipment5.7Clinical simulation5.8Validation in realistic scenarios5.9Ethics of clinical research5.10Case study: usability validation of a tourniquet
6.1Software as a medical device6.2IEC 62304 life cycle6.3Medical device cybersecurity6.4Clinical data interoperability6.5Artificial intelligence in diagnosis6.6Algorithm validation6.7Software updates6.8Patient data management6.9Telemedicine and devices6.10Laboratory: validation of an alarm algorithm
7.1CE marking and notified bodies7.2Post-market surveillance7.3Procurement of military medical equipment7.4Medical STANAGs7.5Allied medical interoperability7.6Legal liability7.7Military medical ethics7.8Equitable access to technology7.9Lessons from the pandemic7.10Case study: equipment procurement file
8.1Definition of the device8.2Risk analysis8.3Verification plan8.4Environmental test plan8.5Clinical validation plan8.6Usability plan8.7Regulatory strategy8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Greenlight Guru, MATLAB, LabVIEW, Jama Connect and Python SciPy, in free, academic or evaluation versions. Testing is studied through real procedures for electrical safety tests, vibration and temperature environmental tests and usability tests with healthcare professionals. Assessment is continuous by module, plus the final project.
Standards covered: Regulation (EU) 2017/745, ISO 13485:2016, ISO 14971:2019, IEC 60601-1, MIL-STD-810H, IEC 62366-1 and IEC 62304.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Greenlight Guru, MATLAB, LabVIEW, Jama Connect and Python SciPy, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in NATO Energy Management and Flexibility
Online postgraduate diploma of 800 hours in NATO energy management and flexibility. 8 modules covering energy security in NATO, allied energy standardisation, ISO 50001 facility energy…
Diploma in PNT Certification in Defence
Online postgraduate diploma of 800 hours in PNT certification in defence: 8 modules covering PNT on military platforms, certification requirements and bases (MIL-HDBK-516C, RTCA DO-229, TSO-C145),…
Postgraduate Diploma in Multispectral Signature Management (IR, Radar, Optical)
Online Postgraduate Diploma of 800 hours in Multispectral Signature Management (IR, radar, optical). 8 modules covering IEEE 686 (standardised radar definitions), ASTM E1933 (emissivity measurement with…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships