Diploma in Underwater Sensor Integration
Online postgraduate diploma of 800 hours in underwater sensor integration. 8 modules covering sensors in the underwater environment, transducers and arrays, integration platforms, mechanical and electrical integration, acquisition and processing, navigation and communications, and testing, regulations and the environment, applied to IEC 60565, IEC 60500 and ISO 13628-6, with an assigned technical tutor.
Diploma in Underwater Sensor Integration — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,400 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the sensors used in the underwater environment.
Design transducer arrays and beamforming.
Select suitable platforms for integration.
Solve the mechanical and electrical integration of sensors.
Implement acquisition and processing chains.
Integrate underwater navigation and communications.
Plan trials according to environmental criteria.
Who it's for
- Underwater systems engineers.
- Acoustic engineers.
- Sensor integration engineers.
- Hydrographic surveyors.
- Underwater vehicle technicians.
- Signal processing engineers.
- Engineering or science graduates looking to move into the naval sector.
What you'll work with
- IEC 60565 (calibration of hydrophones)
- IEC 60500 (hydrophone characteristics)
- ISO 13628-6 (subsea production control systems)
- Directive 2008/56/EC (Marine Strategy Framework Directive)
- IHO S-44 (standards for hydrographic surveys)
- ISO 17208-1 (underwater radiated noise from ships)
- MATLAB
- Python SciPy
- QPS Qimera
- ROS 2
- SonarWiz
8 modules
1.1Properties of the marine environment1.2Acoustic propagation1.3Acoustic sensors1.4Magnetic sensors1.5Electric sensors1.6Underwater optical sensors1.7CTD oceanographic sensors1.8Scientific and defence applications1.9Critical underwater infrastructure1.10Case study: monitoring a subsea cable
2.1Hydrophones and projectors2.2Piezoelectric materials2.3Linear and planar arrays2.4Towed arrays2.5Beamforming2.6Side-scan sonar2.7Multibeam sonar2.8Synthetic aperture sonar2.9Transducer calibration2.10Lab: beamforming in MATLAB
3.1Surface vessels3.2Submarines3.3AUVs3.4ROVs3.5Underwater gliders3.6Buoys and moorings3.7Seabed observatories3.8Sensor networks3.9Integration constraints3.10Practical exercise: platform selection for a survey
4.1Pressure housings4.2Penetrators and connectors4.3Materials and corrosion4.4Biofouling4.5Power supply and batteries4.6Cabling and umbilicals4.7Thermal management4.8Mounting and vibration4.9Pressure testing4.10Lab: leak test of a housing
5.1Acquisition systems5.2Time synchronisation5.3Acoustic signal processing5.4Detection and classification5.5Adaptive filtering5.6On-board processing5.7Data compression5.8Machine learning in sonar5.9Data management5.10Practical exercise: signal detection in acoustic recordings
6.1Underwater inertial navigation6.2USBL and LBL systems6.3Doppler velocity logs (DVL)6.4Acoustic communications6.5Acoustic modems6.6Optical communications6.7Surface and satellite link6.8Data georeferencing6.9Errors and correction6.10Lab: USBL positioning in a tank
7.1Tank testing7.2Sea trials7.3Calibration standards7.4Safety in marine operations7.5Impact of sonar on marine fauna7.6The Marine Strategy Framework Directive7.7Permits and authorisations7.8Cybersecurity of underwater networks7.9Ethics of dual use7.10Case study: acoustic mitigation plan for a trial
8.1Mission definition8.2Sensor selection8.3Platform selection8.4Mechanical and electrical integration8.5Processing chain8.6Navigation and communications8.7Test plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB, Python SciPy, QPS Qimera, ROS 2 and SonarWiz, in free, academic or evaluation versions. Real procedures are studied, including leak and pressure tests, transducer calibration in a tank and processing of acoustic recordings. Assessment is continuous by module, plus the final capstone project.
Standards covered: IEC 60565, IEC 60500, ISO 13628-6, Directive 2008/56/EC, IHO S-44, ISO 17208-1.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB, Python SciPy, QPS Qimera, ROS 2, SonarWiz, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Resilient Infrastructure for Field Campaigns
Online postgraduate diploma of 800 hours in resilient infrastructure for field campaigns. 8 modules covering infrastructure resilience, resilient energy and microgrids, water and sanitation, structures and…
Diploma in Validation of Military PHM Strategies
Online postgraduate diploma of 800 hours in validation of military PHM strategies. 8 modules covering condition-based maintenance, sensors and data acquisition, fault diagnosis, remaining useful life…
Diploma in Vibration, Noise and Load Testing
Online postgraduate diploma of 800 hours in vibration, noise and load testing. 8 modules covering structural dynamics, instrumentation, vibration and shock testing, noise and acoustics, structural…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships