Diploma in SysML and MBSE in Military Programmes
Online postgraduate diploma of 800 hours in SysML and MBSE in military programmes. 8 modules covering MBSE in defence programmes, the SysML language, MBSE methodologies, requirements and architecture, analysis and simulation, model management and collaboration, and contracting and governance, applied to ISO/IEC/IEEE 15288:2023, OMG SysML v1.6 and UAF, with an assigned technical tutor.
Diploma in SysML and MBSE in Military Programmes — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,700 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the value of MBSE in defence programmes.
Master SysML diagrams and concepts.
Apply recognised MBSE methodologies.
Model traceable requirements and architectures.
Carry out analyses and simulations from the model.
Manage models in collaborative environments.
Incorporate MBSE into programme contracting and governance.
Who it's for
- MBSE engineers.
- Systems architects.
- Requirements engineers.
- Digital engineering managers.
- Systems engineering consultants.
- Defence programme managers.
- Engineering or science graduates looking to move into defence.
What you'll work with
- ISO/IEC/IEEE 15288:2023 (system life cycle processes)
- OMG SysML v1.6 (systems modelling language)
- OMG Unified Architecture Framework (UAF) (enterprise and defence architecture framework)
- NATO Architecture Framework v4 (NATO architecture framework)
- ISO/IEC/IEEE 42010 (architecture description)
- ISO/IEC/IEEE 29148 (requirements engineering)
- Cameo Systems Modeler
- Capella
- IBM Rhapsody
- MATLAB Simulink
- Teamwork Cloud
8 modules
1.1From document-based to model-based engineering1.2Benefits in complex programmes1.3DoD Digital Engineering Strategy1.4INCOSE Vision 20351.5Digital thread1.6Authoritative source of truth1.7Managing organisational change1.8MBSE maturity1.9Programme cases1.10Case study: MBSE maturity assessment
2.1SysML 1.6 and SysML v22.2Requirement diagrams2.3Block diagrams: BDD and IBD2.4Activity diagrams2.5Sequence diagrams2.6State machines2.7Parametric diagrams2.8Packages and views2.9Profiles and stereotypes2.10Workshop: basic model in Cameo
3.1OOSEM3.2Arcadia and Capella3.3Harmony SE3.4MagicGrid3.5The SYSMOD method3.6Methodology selection3.7Tailoring to the life cycle3.8Integration with ISO/IEC 152883.9Modelling templates and guidelines3.10Practical exercise: applying MagicGrid to a case
4.1Stakeholder requirements4.2System requirements4.3Traceability in the model4.4Functional architecture4.5Logical architecture4.6Physical architecture4.7Analysis of alternatives4.8NAF and UAF frameworks4.9Capability views4.10Lab: traceability from requirements to architecture
5.1Simulation of SysML models5.2Parametric analysis5.3Mass and power budgets5.4Integration with MATLAB and Modelica5.5Analysis of operational scenarios5.6Behaviour verification5.7Design optimisation5.8Co-simulation5.9Analysis data management5.10Practical exercise: parametric power budget
6.1Model repositories6.2Version control6.3Model configuration management6.4Collaboration between contractors6.5XMI model exchange6.6Model quality and validation6.7Document generation6.8Integration with PLM and ALM6.9Information security6.10Lab: quality review of a model
7.1MBSE requirements in contracts7.2Model-based deliverables7.3Programme reviews with models7.4Allied interoperability7.5Training and competencies7.6Costs and return on investment7.7Adoption risks7.8Intellectual property of models7.9Lessons learned7.10Case study: MBSE clauses in a tender specification
8.1Programme definition8.2Model-based engineering plan8.3Requirements model8.4System architecture8.5Parametric analysis8.6Model management plan8.7Contractual recommendations8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Cameo Systems Modeler, Capella, IBM Rhapsody, MATLAB Simulink and Teamwork Cloud, in free, academic or evaluation versions. Real procedures are studied, including SysML modelling of systems, parametric budget analyses and model quality reviews. Assessment is continuous by module, plus the final capstone project.
Standards covered: ISO/IEC/IEEE 15288:2023, OMG SysML v1.6, OMG Unified Architecture Framework (UAF), NATO Architecture Framework v4, ISO/IEC/IEEE 42010, ISO/IEC/IEEE 29148.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Cameo Systems Modeler, Capella, IBM Rhapsody, MATLAB Simulink, Teamwork Cloud, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in RAMS Life and Reliability Testing
Online postgraduate diploma of 800 hours in RAMS life and reliability testing. 8 modules covering RAMS engineering, reliability statistics, system reliability analysis, accelerated life testing, reliability…
Diploma in NATO Regulations and Standards for Critical Autonomy
Online postgraduate diploma of 800 hours in NATO regulations and standards for critical autonomy. 8 modules covering autonomy standardisation, NATO standards for unmanned systems (STANAG 4586,…
Diploma in Internal and External Risk Assessment
Online postgraduate diploma of 800 hours in internal and external risk assessment. 8 modules covering risk concepts in defence, insider threat, external threats, assessment methods, information…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships