Diploma in Supplier Auditing and Declarations of Conformity
Online postgraduate diploma of 800 hours in supplier auditing and declarations of conformity. 8 modules covering supplier management, supplier auditing, automotive quality requirements, declarations of conformity, substance and material compliance, nonconformities and corrective actions, and sustainability and ethical compliance, with an assigned technical tutor.
Diploma in Supplier Auditing and Declarations of Conformity — studying from Canada
Regulatory compliance, safety assurance and homologation are central to Canadian engineering across transport, energy, medical and industrial sectors. Federal regulators such as Transport Canada, Health Canada and the Canadian Nuclear Safety Commission set requirements, while the Canadian Standards Association publishes widely adopted technical standards. Reliability, availability, maintainability and safety (RAMS) analysis supports certification and operational assurance. Engineers in this area work for manufacturers, certification bodies and regulators.
Fees for Canada: C$2,790 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for regulation and safety work?
SEIUM's qualifications are private, not official state degrees, and are not accredited nationally in Canada. Safety and regulatory roles often rely on recognised professional designations and provincial engineering licensing, such as through Professional Engineers Ontario or Engineers and Geoscientists BC. Recognition of this qualification is decided by employers or the relevant body.
How might employers in Canada view this qualification for RAMS or homologation roles?
Employers in sectors such as transport, energy and manufacturing may be interested in RAMS and homologation knowledge, but they decide how much value to place on a private qualification. Many safety and certification roles also require documented experience and specific credentials. Your final project can help illustrate your skills, though it does not guarantee a position.
What are the practical requirements for studying this from Canada?
Study is 100% online and in English, and no student visa is needed if you study from home. Workloads range from 300 to 1,900 hours, so consider your availability alongside work. Fees are payable in instalments, employer sponsorship is possible, and you are assigned a technical tutor throughout the programme.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Manage the supplier life cycle.
Plan and carry out supplier audits.
Apply automotive sector quality requirements.
Verify declarations of conformity.
Control compliance with regulated substances.
Manage nonconformities and corrective actions.
Integrate ethical and sustainability criteria into audits.
Who it's for
- Supplier auditors.
- Supplier quality engineers.
- Regulatory compliance managers.
- Substance compliance technicians.
- Technical buyers.
- Supply chain managers.
- Engineering or science graduates seeking to enter the automotive sector.
What you'll work with
- ISO 19011 (guidelines for auditing management systems)
- IATF 16949 (automotive quality management)
- VDA 6.3 (process audit)
- Regulation (EC) 1907/2006 REACH (chemicals registration and restriction)
- Directive 2011/65/EU RoHS (restriction of hazardous substances)
- Regulation (EC) 765/2008 (accreditation and market surveillance)
- Decision 768/2008/EC (common framework for marketing of products)
- SAP Ariba
- IMDS
- Intelex
- SafetyCulture iAuditor
- Power BI
8 modules
1.1Supplier life cycle1.2Supplier selection and approval1.3Supply risk assessment1.4Contractual quality requirements1.5Monitoring supplier performance1.6Supplier development programmes1.7Identification of critical suppliers1.8Management of international suppliers1.9Supplier document management1.10Case study: risk-based supplier classification
2.1Audit principles according to ISO 190112.2Types of second-party audit2.3Planning the audit programme2.4Specific checklists2.5Interviews and evidence gathering2.6On-site process audits2.7Finished product audits2.8Remote and document audits2.9Writing the audit report2.10Practical: process audit plan
3.1IATF 16949 requirements for suppliers3.2VDA 6.3 process audit3.3APQP planning and PPAP approval3.4Customer-specific requirements3.5Control of special processes3.6Change management at the supplier3.7Traceability of batches and components3.8Containment actions for defects3.9Supplier escalation levels3.10Workshop: simulated VDA 6.3 audit
4.1CE marking and the EU declaration of conformity4.2Content of the technical documentation4.3Conformity assessment modules4.4Involvement of notified bodies4.5Supplier declarations of conformity4.6Substance declarations of conformity4.7Validity and updating of declarations4.8Risk of false or incomplete declarations4.9Methods for verifying declarations4.10Practical: verification of an EU declaration
5.1Obligations under the REACH regulation5.2Restrictions under the RoHS directive5.3Material declarations in IMDS5.4Notifications to the SCIP database5.5Due diligence on conflict minerals5.6Material declaration formats5.7Substance compliance audits5.8Databases of regulated substances5.9Change management for substances5.10Case study: REACH compliance audit
6.1Management of supplier nonconformities6.2The 8D methodology step by step6.3Root cause analysis6.4Ishikawa diagrams and five whys6.5Verifying the effectiveness of actions6.6Formal closure of corrective actions6.7Monitoring recurrence6.8Supplier quality indicators6.9Recording lessons learned6.10Workshop: complete 8D report
7.1Social audits of suppliers7.2Environmental supply requirements7.3Due diligence in the supply chain7.4Supplier carbon footprint7.5Supplier codes of conduct7.6Prevention of corruption and bribery7.7Data protection in the supply chain7.8Cybersecurity of critical suppliers7.9Corporate sustainability reporting7.10Case study: due diligence on an Asian supplier
8.1Selection of the supplier to be studied8.2Supplier risk analysis8.3Detailed audit plan8.4Simulated execution of the audit8.5Classification of findings8.6Corrective action plan8.7Documentary verification of conformity8.8Follow-up plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SAP Ariba, IMDS, Intelex, SafetyCulture iAuditor and Power BI, in free, academic or evaluation versions. Testing is studied through real procedures for VDA 6.3 process audits, verification of declarations of conformity and 8D reports on nonconformities. Assessment is continuous by module, plus the final project.
Standards covered: ISO 19011, IATF 16949, VDA 6.3, Regulation (EC) 1907/2006 (REACH), Directive 2011/65/EU (RoHS), Regulation (EC) 765/2008 and Decision 768/2008/EC.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SAP Ariba, IMDS, Intelex, SafetyCulture iAuditor and Power BI, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector; no university degree is required.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Reversible Modernisation: Pumps, Filters and Wiring Harness
Online postgraduate diploma of 800 hours in reversible modernisation of pumps, filters and wiring harnesses. 8 modules covering conservation and reversibility principles, the historic vehicle framework,…
Diploma in Body Buck Design and Construction
600-hour online postgraduate diploma in body bucks: digitising the original vehicle, modelling sections, building in timber and steel, setting up the fixture and using it to…
Diploma in Environmental/EMC/Lighting Type Testing
Online postgraduate diploma of 800 hours in environmental, EMC and lighting type testing. 8 modules covering fundamentals, the regulatory framework, EMC testing, environmental testing, lighting photometry,…
More in Regulation, Safety, RAMS & Homologation
All Regulation, Safety, RAMS & Homologation programmes → · How to apply · Fees & financing · Scholarships