Diploma in Spares Systems and Motorsport Logistics
Online postgraduate diploma of 800 hours in spares systems and motorsport logistics. 8 modules covering the motorsport supply chain, inventory management, component traceability, spares IT systems, warehousing and packaging, international transport and continuous improvement under ISO 9001, ISO 28000 and the GS1 General Specifications, with an assigned technical tutor.
Diploma in Spares Systems and Motorsport Logistics — studying from Canada
Canada has an active classic and heritage vehicle community, supported by clubs, restoration specialists and museums across the country. Restoration work requires skills in engineering drawings, metalworking, electrical systems and historical research. Heritage vehicle collections and automotive museums, such as the Canadian Automotive Museum in Oshawa, sustain professional and volunteer expertise. Specialist businesses and independent workshops are the main employers in this niche.
Fees for Canada: C$1,700 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for vehicle restoration work?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Restoration is largely a trade and enthusiast field in Canada, with recognition typically driven by reputation, workshop experience and clubs or heritage organisations rather than a single licensing body. Confirm with any prospective client or employer how they regard private qualifications.
What career use could this have in Canada's classic vehicle sector?
Potential uses include working with specialist restoration workshops, dealerships, collectors or heritage vehicle organisations. Employers and clients decide how to value a private qualification, and hands-on experience is usually the strongest factor in this sector. The final project may serve as a portfolio example, but it does not guarantee work.
Can I study this online with my own schedule from Canada?
Yes, the programme is 100% online and taught in English, so it suits learners across Canada and no student visa is needed to study from home. Programme lengths are 300, 800 or 1,900 hours depending on the level. Fees are payable in instalments, employer sponsorship is possible, and an assigned technical tutor supports your progress.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the supply chain in motorsport.
Manage inventories of critical spares.
Implement component traceability systems.
Configure IT systems for spares management.
Organise suitable warehouses and packaging.
Plan international transport and customs procedures.
Apply continuous improvement and logistics cost control.
Who it's for
- Motorsport logistics managers.
- Inventory managers handling high-value, short-life components.
- Purchasing technicians.
- Warehouse managers.
- Supply chain analysts.
- International transport coordinators.
- Engineering or science graduates looking to enter racing teams.
What you'll work with
- ISO 9001 (quality management systems)
- ISO 28000 (security management systems for the supply chain)
- GS1 General Specifications (barcode and identification standards)
- Incoterms 2020 (international commercial terms)
- ATA Convention (temporary admission of goods)
- Regulation (EU) 952/2013 (Union Customs Code)
- ADR Agreement (international carriage of dangerous goods by road)
- SAP S/4HANA
- Odoo
- Microsoft Dynamics 365 Business Central
- Microsoft Power BI
8 modules
1.1Particularities of the sector1.2Suppliers and in-house manufacturing1.3Part manufacturing lead times1.4Short runs and prototypes1.5Supply risks1.6Calendar and demand peaks1.7Global championship logistics1.8Logistics costs1.9Sustainability1.10Case study: supply chain map of a team
2.1ABC classification2.2Safety stock2.3Reorder point2.4Component service life2.5Rotable and repairable parts2.6Inventory valuation2.7Cycle counting2.8Obsolescence due to technical changes2.9Inventory indicators2.10Practical: sizing the safety stock
3.1Part identification3.2Serial numbers3.3Barcodes and RFID3.4Usage history per component3.5Mileage and hours3.6Material certificates3.7Control of critical parts3.8Withdrawal of life-expired parts3.9Traceability audits3.10Lab: traceability of a suspension assembly
4.1ERP systems4.2Inventory modules4.3Bills of materials4.4Purchase orders4.5Integration with engineering4.6Mobile applications4.7Reports and dashboards4.8Data migration4.9Information security4.10Workshop: configuring an inventory in Odoo
5.1Warehouse design5.2Locations and shelving5.3Packaging of delicate parts5.4Flight cases5.5Protection against humidity5.6Temperature control5.7Order picking5.8Warehouse safety5.9Packaging maintenance5.10Practical: packaging design for a gearbox
6.1Road transport6.2Air freight6.3Sea freight6.4Freight forwarders6.5Customs and the ATA Carnet6.6Dangerous goods6.7Incoterms 20206.8Insurance6.9Lead times and planning6.10Case study: logistics for an intercontinental round
7.1Logistics cost analysis7.2Service indicators7.3Lean logistics7.4Inventory reduction7.5Supplier management7.6Strategic purchasing7.7Risk management7.8Audits7.9Lessons learned7.10Practical: logistics cost-reduction plan
8.1Team diagnosis8.2Inventory analysis8.3Traceability system design8.4IT system configuration8.5Warehouse design8.6Transport plan8.7Indicators8.8Procedures manual8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SAP S/4HANA, Odoo, Microsoft Dynamics 365 Business Central and Microsoft Power BI, in free, academic or evaluation versions. Practical work is based on real procedures: implementing barcode traceability, auditing a team inventory and planning the logistics of an international event. Assessment is continuous by module, plus the final project.
Standards covered: ISO 9001, ISO 28000, GS1 General Specifications, Incoterms 2020, ATA Convention, Regulation (EU) 952/2013 and ADR Agreement.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SAP S/4HANA, Odoo, Microsoft Dynamics 365 Business Central and Microsoft Power BI, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector; no university degree is required.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Non-Invasive Battery/Motor Integration
Online 800-hour Postgraduate Diploma in Non-Invasive Battery/Motor Integration. 8 modules covering UNECE Regulation No. 100 (electrical safety of electric vehicles), ISO 6469-3 (electric vehicles: electrical safety)…
Diploma in Steel and Rubber Track Engineering
Online postgraduate diploma of 800 hours in steel and rubber track engineering. 8 modules covering tracked running gear, steel tracks, rubber tracks, track-soil mechanics, design and…
Diploma in Regularity Instrumentation and Calibration
Online postgraduate diploma of 800 hours in regularity rally instrumentation and calibration, structured in 8 modules covering distance and time measurement, regularity instruments, metrology, road-book navigation…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships