Diploma in MUM-T Integration Technologies
Online postgraduate diploma of 800 hours in MUM-T integration technologies. 8 modules covering manned-unmanned teaming, open system architectures, data links and communications, autonomy and cooperation, human factors and interfaces, simulation and integration, and certification, regulation and ethics, with an assigned technical tutor.
Diploma in MUM-T Integration Technologies — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$2,330 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the concept of manned-unmanned teaming.
Design open architectures for platform integration.
Select suitable data links and communications.
Apply autonomy and cooperation algorithms.
Design operator-centred interfaces.
Integrate and test systems through simulation.
Assess the regulatory and ethical aspects of integration.
Who it's for
- Unmanned systems engineers.
- Autonomous systems architects.
- Human factors specialists working on control stations and interfaces.
- Integration engineers on air, land or naval platforms.
- Tactical communications engineers.
- Test analysts.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- STANAG 4586 (UAV control system interoperability)
- STANAG 4671 (UAV airworthiness)
- FACE standard (open architecture)
- SAE AS5669A (JAUS architecture)
- Implementing Regulation (EU) 2019/947 (UAS operations)
- IEEE 1278 (Distributed Interactive Simulation)
- ROS 2
- Gazebo
- AirSim
- Cameo Systems Modeler
- QGroundControl
8 modules
1.1The MUM-T concept1.2STANAG 4586 levels of interoperability1.3Air, land and naval platforms1.4Loyal wingman concept and collaborative autonomy1.5Experience from international programmes1.6Benefits and limitations1.7Civil applications: emergencies and rescue1.8Shared control interfaces1.9Technological challenges1.10Case study: analysis of a search and rescue mission
2.1Open and modular architectures2.2The FACE standard2.3JAUS architecture2.4ROS 2 and DDS2.5Real-time middleware2.6Payload integration2.7Modelling with SysML2.8Interface management2.9Architecture security2.10Workshop: architecture diagram in SysML
3.1Command and control links3.2Tactical data links3.3Software-defined radios3.4Mesh networks3.5Latency and bandwidth3.6Satellite communications3.7Link cybersecurity3.8Spectrum management3.9Range testing3.10Lab: mesh network with SDR radios
4.1Levels of autonomy4.2Route planning4.3Multi-agent task allocation4.4Formation and tracking4.5Perception and sensor fusion4.6Uncertainty management4.7Failure behaviours4.8Verification of autonomy4.9Explainability for the operator4.10Practical exercise: task allocation in simulation
5.1Operator workload5.2Shared situational awareness5.3Trust in automation5.4Control interface design5.5Augmented reality5.6Voice and gesture control5.7Assessment with NASA-TLX5.8Operator training5.9Meaningful human control5.10Lab: workload assessment
6.1Constructive and virtual simulation6.2Gazebo and AirSim6.3Hardware-in-the-loop integration6.4HLA interoperability6.5Incremental testing6.6Configuration management6.7Field trials6.8Performance metrics6.9Lessons learned6.10Practical exercise: cooperative scenario in Gazebo
7.1Airworthiness of military UAS7.2Airspace integration7.3STANAG 4671 and 4586 standards7.4Functional safety7.5International humanitarian law7.6Accountability in collaborative systems7.7Ethics of autonomy7.8Privacy in civil uses7.9Export controls7.10Case study: ethical review of a MUM-T concept
8.1Definition of the use case8.2System requirements8.3Proposed architecture8.4Data links8.5Cooperation algorithms8.6Interface design8.7Test plan8.8Ethical and regulatory assessment8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. You work with ROS 2, Gazebo, AirSim, Cameo Systems Modeler and QGroundControl, in free, academic or evaluation versions. Practical work is based on real procedures: multi-agent cooperative simulations, operator workload assessment and mesh link testing. Assessment is continuous by module, plus the final project.
Standards covered: STANAG 4586, STANAG 4671, FACE standard, SAE AS5669A, Implementing Regulation (EU) 2019/947 and IEEE 1278.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with ROS 2, Gazebo, AirSim, Cameo Systems Modeler and QGroundControl, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Environmental Regulations in Military Electrification
600-hour online postgraduate diploma in environmental regulation for military electrification: batteries, UN 38.3 transport, REACH and RoHS, waste, carbon footprint, EIA and ISO 14001, with an…
Diploma in Experimental Fuel Testing
Online postgraduate diploma of 800 hours in experimental fuel testing. 8 modules covering test reactor programmes, fabrication and characterisation, in-reactor instrumentation, RIA and LOCA testing, out-of-pile…
Diploma in PNT Certification in Defence
Online postgraduate diploma of 800 hours in PNT certification in defence: 8 modules covering PNT on military platforms, certification requirements and bases (MIL-HDBK-516C, RTCA DO-229, TSO-C145),…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships