Diploma in Military Functional Safety Standards
Online postgraduate diploma of 800 hours in military functional safety standards. 8 modules covering functional safety in defence, MIL-STD-882E and Def Stan 00-056, hazard analysis, IEC 61508 and derived standards, safety-critical software and hardware, the safety case, and safety management and ethics, with an assigned technical tutor.
Diploma in Military Functional Safety Standards — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$2,790 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the principles of functional safety in defence.
Apply MIL-STD-882E and the British safety standards.
Carry out hazard analyses using recognised techniques.
Determine integrity levels in accordance with IEC 61508.
Manage requirements for safety-critical software and hardware.
Build safety cases with structured arguments.
Take on ethical responsibilities in risk acceptance.
Who it's for
- Functional safety engineers.
- Independent safety assessors.
- Safety-critical systems engineers working on defence platforms.
- Software verification specialists.
- Programme safety managers.
- Certification consultants.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- MIL-STD-882E (standard practice for system safety)
- Def Stan 00-056 (safety management requirements for defence systems)
- IEC 61508 (functional safety of E/E/PE systems)
- DO-178C (software in airborne systems)
- ARP4761 (safety assessment of civil aircraft)
- ISO 26262 (functional safety in road vehicles)
- DO-254 (airborne electronic hardware)
- Isograph FaultTree+
- Medini Analyze
- Astah GSN
- LDRA Testbed
- Cameo Systems Modeler
8 modules
1.1Concepts of risk, hazard and harm1.2Functional safety versus physical security1.3Safety lifecycle1.4Safety-critical systems1.5Particular features of military platforms1.6Relationship with airworthiness1.7Safety authorities and bodies1.8Safety case documentation1.9Safety culture1.10Case study: lessons from the Therac-25 accident
2.1Structure of MIL-STD-882E2.2Hazard analysis tasks2.3Risk matrix and categories2.4Software criticality indices2.5Def Stan 00-055 and 00-0562.6Risk acceptance by authorities2.7Hazard log2.8Comparison between standards2.9Contractual tailoring2.10Workshop: building a hazard log
3.1Preliminary hazard analysis3.2HAZOP applied to systems3.3FMEA and FMECA3.4Fault trees3.5Event trees3.6Common cause analysis3.7STPA and systems theory3.8Human factors analysis3.9Integration of results3.10Practical: fault tree with specialist software
4.1SIL integrity levels4.2Hardware and architecture requirements4.3Safe failure fraction4.4IEC 61508-3 software requirements4.5IEC 61511 in the process industry4.6ISO 26262 in vehicles4.7EN 50128 in railways4.8Application to military land systems4.9Component certification4.10Case study: determining the SIL of a function
5.1DO-178C and DAL levels5.2DO-254 for complex hardware5.3ARP4754A and ARP47615.4Verification and structural coverage5.5Formal methods5.6Qualified tools5.7Configuration management5.8Reused software and COTS5.9Partitioning and ARINC 653 operating systems5.10Laboratory: MC/DC coverage analysis
6.1Structure of the safety case6.2GSN notation6.3Arguments and evidence6.4Independent review6.5Independent safety assessor6.6Change management6.7In-service safety6.8System disposal6.9Safety versus cybersecurity6.10Practical: GSN argument for a subsystem
7.1Safety organisation in programmes7.2Contracts and responsibilities7.3Supplier management7.4Safety audits7.5Occurrence reporting7.6Legal responsibility of the engineer7.7Professional ethics and whistleblowing7.8Safety of autonomous systems7.9Interaction with the military user7.10Case study: ethical analysis of a risk acceptance decision
8.1System definition8.2Hazard identification8.3Risk assessment8.4Allocation of integrity requirements8.5Architecture analysis8.6Verification plan8.7Safety case8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Isograph FaultTree+, Medini Analyze, Astah GSN, LDRA Testbed and Cameo Systems Modeler, in free, academic or evaluation versions. Practical work is based on real procedures for fault tree analysis, building GSN arguments and structural coverage analysis of software. Assessment is continuous by module plus the final integrating project.
Standards covered: MIL-STD-882E, Def Stan 00-056, IEC 61508, DO-178C, ARP4761, ISO 26262, DO-254.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Isograph FaultTree+, Medini Analyze, Astah GSN, LDRA Testbed and Cameo Systems Modeler, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Fuel Enrichment and Fabrication
Online postgraduate diploma of 800 hours in nuclear fuel enrichment and fabrication. 8 modules covering conversion to hexafluoride, enrichment and safeguards, ceramic pellet fabrication, cladding and…
Diploma in Procurement Processes and Transparency
Online postgraduate diploma of 800 hours in defence procurement processes and transparency. 8 modules covering the legal framework, planning and requirements, transparency, integrity and anti-corruption, international…
Diploma in Underwater Acoustics and Noise Reduction
Online postgraduate diploma of 800 hours in underwater acoustics and noise reduction. 8 modules covering sound propagation in the sea, acoustic propagation models, ship radiated noise…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships