Diploma in MIL-STD-461/464: Military EMC/EMI
Online postgraduate diploma of 800 hours in military EMC/EMI to MIL-STD-461/464. 8 modules covering electromagnetic compatibility fundamentals, MIL-STD-461G, laboratory testing, system-level MIL-STD-464C, design for EMC, diagnosis and troubleshooting, and management, certification and civil regulations, with an assigned technical tutor.
Diploma in MIL-STD-461/464: Military EMC/EMI — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$2,010 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the fundamentals of electromagnetic compatibility.
Apply the requirements of MIL-STD-461G.
Carry out EMC laboratory tests.
Apply MIL-STD-464C at system level.
Design equipment using EMC criteria.
Diagnose and resolve test failures.
Manage certification and the EMI control plan.
Who it's for
- EMC engineers.
- EMC laboratory technicians.
- Electronic design engineers.
- Systems integration engineers.
- Certification engineers.
- Hardware engineers bringing products into the defence market.
- Engineering or science graduates looking to move into defence.
What you'll work with
- MIL-STD-461G (control of electromagnetic interference)
- MIL-STD-464C (electromagnetic environmental effects)
- DO-160G (environmental conditions for airborne equipment)
- Directive 2014/30/EU (electromagnetic compatibility)
- MIL-HDBK-235 (external electromagnetic environments)
- IEC 61000-4-2 (electrostatic discharge immunity)
- ISO/IEC 17025 (competence of testing laboratories)
- CST Studio Suite
- Ansys HFSS
- Keysight PathWave
- Altium Designer
- LTspice
8 modules
1.1Emission and susceptibility1.2Conducted and radiated coupling1.3Capacitive and inductive coupling1.4Near and far fields1.5dB units and conversions1.6Spectrum of digital signals1.7Interference sources on platforms1.8Sensitive receivers1.9Design for EMC1.10Workshop: spectrum calculation for a clock signal
2.1Structure of the standard2.2Applicability by platform2.3CE101 and CE102 requirements2.4CS101, CS114, CS115 and CS116 requirements2.5RE102 requirements2.6RS103 requirements2.7CS118 ESD requirements2.8Tailoring of limits2.9Comparison with DO-160 and EN 550322.10Practical exercise: matrix of requirements applicable to a unit
3.1Semi-anechoic chambers3.2LISNs and current probes3.3Test antennas3.4EMI receivers3.5Power amplifiers3.6Test calibration3.7Equipment-under-test set-up3.8Measurement uncertainty3.9Test reports3.10Lab: RE102 measurement in a chamber
4.1Safety margins4.2Intra-system EMC4.3External electromagnetic environment4.4Direct and indirect lightning4.5Electromagnetic pulse4.6Electrostatic discharge4.7HERO, HERP and HERF4.8Personnel protection4.9Spectrum management4.10Case study: EMI control plan for a platform
5.1Printed circuit board design5.2Ground planes5.3Line filtering5.4Shielding and gaskets5.5Cables and connectors5.6Grounding and bonding5.7Transient protection5.8Switch-mode power supplies5.9EMC simulation5.10Practical exercise: design of an input filter
6.1Pre-scan techniques6.2Near-field probes6.3Source identification6.4Analysis of test failures6.5Corrective measures6.6Iterative redesign6.7Non-conformance management6.8Lessons learned6.9Technical documentation6.10Lab: diagnosis with near-field probes
7.1EMI control plan7.2EMI test report7.3Contractual requirements7.4Test laboratory accreditation7.5EMC Directive 2014/30/EU7.6Civil equipment on military platforms7.7Cybersecurity and TEMPEST emanations7.8Personnel safety during testing7.9Professional ethics7.10Case study: integration of a COTS unit
8.1Defining the equipment8.2Applicable requirements8.3EMC risk analysis8.4Design measures8.5Test plan8.6Results analysis8.7EMI control plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is CST Studio Suite, Ansys HFSS, Keysight PathWave, Altium Designer and LTspice, in free, academic or evaluation versions. Practical work is based on real procedures for radiated emission measurements in a chamber, diagnosis with near-field probes and conducted susceptibility tests. Assessment is continuous by module plus the final project.
Standards covered: MIL-STD-461G, MIL-STD-464C, DO-160G, Directive 2014/30/EU, MIL-HDBK-235, IEC 61000-4-2, ISO/IEC 17025.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with CST Studio Suite, Ansys HFSS, Keysight PathWave, Altium Designer and LTspice, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Tactical Field Bridge Design
Online postgraduate diploma of 800 hours in tactical field bridge design. 8 modules covering field bridge engineering, military load classification (STANAG 2021), structural analysis, materials and…
Diploma in Power Systems Integration for Weapons and Sensors
600-hour online postgraduate diploma in power integration for mission loads: requirements and interfaces, MIL-STD-1275E, MIL-STD-882E, EMC, qualification, configuration and ethics, with an assigned technical tutor.
Diploma in Ethics in Critical PNT Applications
Online postgraduate diploma of 800 hours in ethics in critical PNT applications. 8 modules covering societal dependence on PNT, ethics of critical infrastructure, privacy and location,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships