Diploma in Heavy-Duty Braking Energy Recovery
Online postgraduate diploma of 800 hours in Heavy-Duty Braking Energy Recovery: 8 modules covering heavy vehicle braking dynamics, retarders, electrical, hydraulic and mechanical recovery, blended braking control, thermal management and durability, and testing and validation, with an assigned technical tutor.
Diploma in Heavy-Duty Braking Energy Recovery — studying from Canada
Canada's off-road and heavy machinery sector serves mining, forestry, agriculture and construction, all major contributors to the national economy. Manufacturers and dealers in Ontario, Alberta, Saskatchewan and British Columbia supply equipment for resource extraction and infrastructure. Mining activity in Northern Ontario, Quebec and the territories drives demand for rugged vehicle engineering and maintenance expertise. Engineers work on hydraulics, drivetrains, machine safety and special vehicle design.
Fees for Canada: C$2,010 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for off-road and special vehicle engineering?
SEIUM's qualifications are private, not official state degrees, and are not accredited nationally in Canada. Professional engineering titles are regulated provincially, and vehicle and equipment safety is governed by standards such as those from the CSA and rules from Transport Canada where applicable. Recognition of a private qualification is decided by employers or the relevant body.
What employers in Canada might value this qualification for special vehicles and machinery?
Employers could include mining, forestry, agricultural, construction and specialist vehicle manufacturers across Canada. Each employer decides how much weight to place on a private qualification, and practical experience is often central in these sectors. The final project can demonstrate applied capability, but it does not guarantee any role.
How can I study this while working in Canada, and how is it funded?
The programme is online and in English, so you can study from anywhere in Canada without a student visa. Choose from 300-hour specialist courses, 800-hour postgraduate diplomas or 1,900-hour master's programmes. Fees are payable in instalments, and employer sponsorship is possible, which some Canadian employers offer for job-relevant training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Quantify the energy available during braking of heavy vehicles.
Compare retarders and endurance braking systems.
Design electrical and hydraulic recovery systems.
Develop blended braking control strategies.
Analyse the thermal management and durability of components.
Plan validation and type-approval tests.
Assess recovery solutions technically and economically.
Who it's for
- Braking systems engineers.
- Heavy vehicle electrification engineers.
- Powertrain control engineers.
- Vehicle test engineers.
- Fleet energy efficiency specialists.
- Functional safety engineers.
- Engineering or science graduates looking to enter the mining sector.
What you'll work with
- UNECE Regulation R13 (braking of heavy vehicles)
- ISO 3450 (earth-moving machinery: braking systems)
- ISO 6469-3 (electrically propelled vehicles: electrical safety)
- ISO 19014 (earth-moving machinery: functional safety)
- UNECE Regulation R100 (electric power train safety)
- Directive 2006/42/EC (machinery)
- MATLAB/Simulink
- Simcenter Amesim
- GT-SUITE
- AVL CRUISE M
8 modules
1.1Kinetic and potential energy on descents1.2Load distribution and load transfer1.3Tyre adhesion and slip1.4Braking power and heat dissipation1.5Service, secondary and parking brakes1.6Duty cycles in mining and quarrying1.7Long gradients and endurance braking1.8UNECE R13 Type II tests1.9Energy balance of a dump truck1.10Workshop: calculating recoverable energy on a descent
2.1Engine brake and exhaust brake2.2Compression release brake2.3Hydrodynamic retarders2.4Electromagnetic retarders2.5Retarder and service brake integration2.6Retarder thermal management2.7Limitations on low-adhesion surfaces2.8Brake blending strategies2.9Comparison of solutions2.10Case study: selecting a retarder for a dumper
3.1Electric machines in generator mode3.2Bidirectional inverters3.3Batteries and supercapacitors3.4Braking resistors and choppers3.5State of charge and acceptance limits3.6Electric wheel drives in mining haul trucks3.7Trolley assist in mining3.8Full-cycle efficiency3.9Electrical safety to ISO 6469-33.10Practical exercise: sizing a supercapacitor bank
4.1Hydropneumatic accumulators in braking4.2Reversible pump-motors in the driveline4.3Flywheels4.4Hydraulic hybrid chassis systems4.5Clutches and disconnect devices4.6Losses and efficiency4.7Integration with service brakes4.8Applications in refuse collection vehicles4.9Electrical versus hydraulic comparison4.10Case study: refuse truck with hydraulic recovery
5.1Electronic braking system (EBS) architectures5.2Blending regenerative and friction braking5.3Priority and distribution between axles5.4Anti-lock braking with regenerative braking5.5Stability on descents and low traction5.6Driver response and pedal feel5.7CAN and SAE J1939 protocols5.8Diagnostics and degraded modes5.9Functional safety to ISO 190145.10Lab: brake blending simulation in Simulink
6.1Disc and drum temperature6.2Brake fade and its prevention6.3Retarder cooling6.4Battery heating during recovery6.5Lining wear and service life6.6Thermal models of components6.7Dynamometer bench tests6.8In-service monitoring6.9Predictive maintenance of the system6.10Practical exercise: thermal model of a brake on a descent
7.1System validation plan7.2Track and gradient tests7.3Measuring recovered energy7.4Instrumentation and data acquisition7.5Type-approval tests7.6Hardware-in-the-loop validation7.7Tests in extreme conditions7.8Analysis of results and correlation7.9Technical documentation7.10Case study: test campaign at a mine
8.1Defining the vehicle and the duty cycle8.2Baseline energy analysis8.3Selecting the recovery technology8.4Sizing the components8.5Control strategy8.6Full-cycle simulation8.7Economic and emissions assessment8.8Risks and validation plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on SEIUM's campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB/Simulink, Simcenter Amesim, GT-SUITE and AVL CRUISE M, in free, academic or evaluation versions. Exercises are based on real procedures for measuring recovered energy on quarry descents, simulating regenerative brake blending and bench thermal tests of brakes. Assessment is continuous by module, plus the final capstone project.
Standards covered: UNECE Regulation R13, ISO 3450, ISO 6469-3, ISO 19014, UNECE Regulation R100, Machinery Directive 2006/42/EC.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB/Simulink, Simcenter Amesim, GT-SUITE and AVL CRUISE M, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Stage V Engine Calibration
Online postgraduate diploma of 800 hours in Stage V engine calibration. 8 modules covering Stage V regulations, engine architecture, calibration tools, combustion and aftertreatment calibration, type-approval…
Diploma in DPF and Solid Emissions Control
Online postgraduate diploma of 800 hours in diesel particulate filters (DPF) and solid emissions control. 8 modules covering diesel particulates, filter technology, regeneration, ash and durability,…
Diploma in Airport Risk Management
Online postgraduate diploma of 800 hours in airport risk management. 8 modules covering the airport as a system, safety management systems (ICAO Doc 9859), apron operational…
More in Off-Road, Special Vehicles & Machinery
All Off-Road, Special Vehicles & Machinery programmes → · How to apply · Fees & financing · Scholarships