Diploma in Ethics of Protective Materials Development
Online postgraduate diploma of 800 hours in ethics of protective materials development. 8 modules covering protective materials technology, ethics of innovation, the PPE and chemicals regulatory framework, life cycle sustainability, experimental ethics, equity of access and ethical governance, with an assigned technical tutor.
Diploma in Ethics of Protective Materials Development — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,400 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the properties and applications of personal and collective protective materials.
Analyse the ethical dilemmas of developing protective materials.
Apply the regulatory framework for personal protective equipment and chemical substances.
Assess environmental impact through life cycle assessment.
Design test protocols that respect ethics and safety.
Evaluate equity in access to protection.
Prepare ethical assessment reports for R&D projects.
Who it's for
- Protective materials engineers.
- Sustainability managers in the defence sector.
- PPE regulatory specialists.
- REACH compliance auditors.
- Innovation ethics consultants.
- R&D project managers working on protective equipment.
- Engineering or science graduates looking to enter the defence industry.
What you'll work with
- Regulation (EU) 2016/425 (personal protective equipment)
- Regulation (EC) 1907/2006 REACH (chemical substances)
- NIJ Standard 0101.06 (ballistic body armour)
- ISO 14040 (life cycle assessment)
- EN ISO 13982-1 (clothing against solid particulates)
- Chemical Weapons Convention (prohibition of chemical weapons)
- ISO 26000 (social responsibility)
- SimaPro
- OpenLCA
- Granta EduPack
- NVivo
8 modules
1.1Aramid and UHMW polyethylene fibres1.2Protective ceramics: alumina and boron carbide1.3Laminates and composite materials1.4Barrier textiles against chemical agents1.5Selectively permeable membranes1.6Foams and impact-absorbing materials1.7Nanomaterials in protection1.8Degradation and service life1.9Shape-memory and adaptive materials1.10Lab: comparison of protective samples
2.1Ethics of applied research2.2Protection versus offensive capability2.3Responsible research and innovation (RRI)2.4Conflicts of interest in funding2.5Scientific integrity and publication2.6Intellectual property and open access2.7Involvement of end users2.8Ethics committees in R&D2.9Ethics of trade secrecy versus transparency2.10Case study: a defence-funded project
3.1Regulation (EU) 2016/425 and PPE categories3.2Conformity assessment and CE marking3.3REACH: registration and restriction3.4PFAS substances in technical textiles3.5Standards for chemical protective clothing3.6NIJ ballistic standards and equivalents3.7Public procurement of PPE3.8Market surveillance3.9Chemical protective clothing standard EN 9433.10Workshop: technical file for a PPE item
4.1ISO 14040 and 14044 methodology4.2Inventory of materials and energy4.3Carbon footprint of technical fibres4.4End of life and recycling of composites4.5Ecodesign of protective equipment4.6Substitution of hazardous substances4.7Environmental product declarations4.8The circular economy in defence4.9Toxicity of manufacturing processes4.10Practical exercise: simplified LCA of a helmet
5.1Tests with mannequins and tissue simulants5.2Replacement of animal testing5.3Safety of laboratory staff5.4Management of test waste5.5Representativeness of tests5.6Transparency of negative results5.7Tests with human volunteers5.8Accredited laboratory standards5.9Ethics in the publication of test results5.10Case study: review of a test protocol
6.1Protection of civilians and humanitarian personnel6.2Ergonomics and user diversity6.3Sizing, gender and fit6.4Cost and access in developing countries6.5Export of protective materials6.6Donations and international cooperation6.7Bias in equipment design6.8Equity indicators6.9Protection of vulnerable groups6.10Workshop: inclusive design of protective equipment
7.1Ethical impact assessment in projects7.2Ethical risk matrices7.3Relations with the supply chain7.4Due diligence on raw materials7.5Conflict minerals7.6Social responsibility according to ISO 260007.7Communication with stakeholders7.8External ethical audit7.9Traceability of fibres and resins7.10Case study: due diligence on a supplier
8.1Definition of the material and its application8.2Stakeholder map8.3Analysis of the applicable regulations8.4Preliminary environmental assessment8.5Identification of ethical dilemmas8.6Proposed mitigation measures8.7Final ethics report8.8Recommendations for management8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online learning on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SimaPro, OpenLCA, Granta EduPack and NVivo, in free, academic or evaluation versions. Practical work is based on real procedures: life cycle assessment of a protective vest, ethical review of a test protocol and assessment of restricted substances in a material. Assessment is continuous by module plus the final project.
Standards covered: Regulation (EU) 2016/425, Regulation (EC) 1907/2006 REACH, NIJ Standard 0101.06, ISO 14040, EN ISO 13982-1, Chemical Weapons Convention, ISO 26000.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SimaPro, OpenLCA, Granta EduPack and NVivo, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Reliability and Safety Methods
Online postgraduate diploma of 800 hours in reliability and safety methods. 8 modules covering applied probability, life data analysis, FMEA/FMECA, fault trees and system models, functional…
Diploma in CBRN Protection Materials and Validation
Online postgraduate diploma of 800 hours in CBRN protection materials and their validation. 8 modules covering CBRN protection principles, barrier materials, adsorbent and filter materials, test…
Diploma in Neutronic-Thermal Modelling of Advanced Fuels
Online postgraduate diploma of 800 hours in neutronic-thermal modelling of advanced fuels. 8 modules covering reactor neutronics, deterministic and Monte Carlo methods, thermal-hydraulic coupling, advanced fuels…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships