Diploma in Environmental Risks, Seasickness and Fatigue Offshore
Online postgraduate diploma of 800 hours in environmental risks, seasickness and fatigue offshore. 8 modules covering fundamentals, the regulatory framework (MDR, ISO 13485, IEC 62304), analysis methods, design, systems integration, risk, validation and an integrative case study, with an assigned technical tutor.
Diploma in Environmental Risks, Seasickness and Fatigue Offshore — studying from Canada
Canada's marine sector includes shipbuilding and naval programmes on the Atlantic and Pacific coasts, with yards in Halifax, Saint John and Vancouver. The National Shipbuilding Strategy supports the design and construction of federal vessels. Offshore energy activity is centred on Newfoundland and Labrador and Nova Scotia, while recreational boating and sports nautical manufacturing are active in Ontario and British Columbia. Engineers work on hull design, propulsion, marine systems and classification.
Fees for Canada: C$2,330 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for naval and offshore engineering?
SEIUM's qualifications are private, not official state degrees, and are not accredited nationally in Canada. Marine and offshore engineering is linked to bodies such as Engineers Canada and provincial regulators for professional engineering, and to classification societies for vessel certification. Recognition of a private qualification is decided by employers or the relevant body.
Who in Canada might employ graduates of this area?
Employers could include shipyards, offshore energy firms, naval contractors and marine equipment suppliers, as well as sports nautical manufacturers. Each employer decides how it values a private qualification, and sector-specific experience and certifications are often important. Your final project may help demonstrate applied skills, but no job outcome is guaranteed.
What practical factors should I check before enrolling from Canada?
The programme is online and taught in English, so you can study from any Canadian location with no student visa needed. Programmes range from 300 hours to 1,900 hours, so plan your schedule realistically. Fees are payable in instalments, employer sponsorship is possible, and each student is assigned a technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Master the technical fundamentals of environmental risks, seasickness and fatigue offshore and their regulatory vocabulary.
Apply Regulation (EU) 2017/745 (MDR), ISO 13485 and IEC 62304 (medical device software) to real design and validation decisions.
Build and correlate calculation models with OpenSim and AnyBody Modeling System.
Plan and run test campaigns in a motion analysis laboratory and on an implant test bench.
Analyse operating data and turn it into engineering decisions.
Prepare the technical and compliance dossier required by the client or the regulator.
Lead a environmental risks, seasickness and fatigue offshore project technically from start to finish.
Who it's for
- Biomedical engineers working on the health of offshore personnel.
- Biomechanics specialists studying the effects of motion and vibration on workers.
- Healthcare regulatory affairs managers in charge of occupational health compliance.
- Medical software engineers developing fatigue and wellbeing monitoring tools.
- Clinical trials technicians running studies on seasickness and fatigue.
- Orthosis and prosthesis designers developing protective and support equipment.
- Engineering or science graduates looking to enter the medical device sector.
What you'll work with
- Regulation (EU) 2017/745 (MDR) (EU medical device regulation)
- ISO 13485 (quality management for medical devices)
- IEC 62304 (medical device software life cycle)
- ISO 14971 (risk management for medical devices)
- IEC 60601 (safety of medical electrical equipment)
- ISO 10993 (biological evaluation and biocompatibility)
- ISO 14155 (clinical investigation of medical devices)
- Regulation (EU) 2016/679 (GDPR, personal data protection)
- UNE-EN ISO 22442 (medical devices utilising animal tissues)
- OpenSim
- AnyBody Modeling System
- Mimics
- 3-matic
- ANSYS Mechanical
8 modules
1.1Fundamental concepts and quantities of Environmental Risks, Seasickness and Fatigue Offshore1.2Technological landscape and state of the art1.3Technical terminology and reference documentation1.4Physical and engineering principles applied to the case1.5Functional architecture: from requirements to components1.6Interfaces and dependencies with adjacent systems1.7Typical use cases in the sector1.8Common errors and how to detect them early1.9Data sources and quality criteria1.10Guided exercise: initial diagnosis
2.1Applicable regulatory framework: overview2.2Regulatory hierarchy and conflicts between standards2.3Mandatory requirements versus good practice2.4Acceptance criteria and required evidence2.5Technical documentation and traceability2.6Change management and configuration control2.7Audits, inspections and non-conformities2.8Responsibilities and division of scope2.9Interpretation of critical clauses2.10Exercise: regulatory checklist
3.1Setting up the model: hypotheses and simplifications3.2Selection of tools and working environment3.3Preparation of input data3.4Workflow and good modelling practice3.5Discretisation and case preparation3.6Boundary conditions and load cases3.7Convergence control and numerical verification3.8Sensitivity analysis and parametric study3.9Automation and reuse of models3.10Exercise: building a base model
4.1Design requirements and starting criteria4.2Solution alternatives and comparative analysis4.3Sizing and safety margins4.4Selection of materials, equipment or components4.5Integration with the rest of the system4.6Cost, schedule and manufacturing constraints4.7Reliability, maintainability and service life4.8Sustainability and efficiency in design4.9Design review and risk management4.10Exercise: documented design proposal
5.1System architecture and functional breakdown5.2Interface definition and control5.3Protocols and data exchange5.4Progressive integration and interface testing5.5Electromagnetic and environmental compatibility5.6Configuration management of the whole system5.7Resolving conflicts between subsystems5.8Tuning of the integrated system5.9Traceability from requirements to verification5.10Exercise: interface matrix
6.1Hazard identification and preliminary analysis6.2Failure modes and effects analysis6.3Fault trees and quantitative analysis6.4Allocation of reliability targets6.5Barriers, redundancy and fault tolerance6.6Human factors and operating errors6.7Safety evidence and argumentation6.8Risk management throughout the life cycle6.9Indicators and monitoring in operation6.10Exercise: risk analysis of a case
7.1Verification and validation strategy7.2Test plan: scope and coverage7.3Instrumentation and data acquisition7.4Laboratory testing versus field testing7.5Correlation between model and measurement7.6Handling uncertainty and tolerances7.7Failure analysis and corrective actions7.8Commissioning and acceptance criteria7.9Documenting the validation file7.10Exercise: validation report
8.1Definition of the case and success criteria8.2Collection of input data and requirements8.3Work planning and deliverables8.4Technical development guided by the tutor8.5Application of the regulatory framework to the case8.6Verification of results and critical analysis8.7Documentation of the deliverable8.8Technical defence and peer review8.9Lessons learned and continuous improvement8.10Final project: final assessment and programme close-out
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine the programme with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is OpenSim, AnyBody Modeling System, Mimics, 3-matic and ANSYS Mechanical, in free, academic or evaluation versions. Testing is studied on real procedures from a motion analysis laboratory, an implant test bench and a biocompatibility chamber. Assessment is continuous by module, plus the final integrative project.
Standards covered: Regulation (EU) 2017/745 (MDR), ISO 13485, IEC 62304, ISO 14971, IEC 60601, ISO 10993, ISO 14155, Regulation (EU) 2016/679, UNE-EN ISO 22442.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with OpenSim, AnyBody Modeling System, Mimics, 3-matic and ANSYS Mechanical, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree is required), plus English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in GMDSS, Communications and Compliance
Online 800-hour Postgraduate Diploma in GMDSS, Communications and Compliance. 8 modules covering SOLAS Chapter IV (radiocommunications), the ITU Radio Regulations and the SMSSM/GMDSS Simulator. Dedicated tutor…
Postgraduate Diploma in MES, Traceability and Data-Ops in Production
Online 800-hour Postgraduate Diploma in MES, Traceability and Data-Ops in Production. 8 modules covering IEC 62264 / ISA-95 (enterprise-control integration), IEC 62541 (OPC UA) and Siemens…
Postgraduate Diploma in Condition-Based Maintenance of Propulsion Systems
Online 800-hour Postgraduate Diploma in Condition-Based Maintenance of Propulsion Systems. 8 modules with ISO 20816-1 (mechanical vibration: measurement and evaluation), ISO 13373-1 (vibration condition monitoring) and…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships