Diploma in Counter-UAS Ethics
Online postgraduate diploma of 800 hours in counter-UAS ethics. 8 modules covering drones and society, ethical principles of response, the civil and military legal frameworks, technical and collateral risks, privacy and rights, and governance and training, with an assigned technical tutor.
Diploma in Counter-UAS Ethics — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$2,790 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the social impact of drones.
Apply the principles of necessity and proportionality to the response.
Interpret the civil legal framework for drones.
Compare the military and international frameworks.
Assess technical and collateral risks.
Protect the privacy and rights of those affected.
Design protocols and governance mechanisms.
Who it's for
- Legal advisers specialising in drones.
- Event security managers.
- Technology ethics consultants.
- Infrastructure protection coordinators at airports, ports and critical sites.
- Trainers of counter-UAS operators.
- Security policy analysts.
- Engineering or science graduates looking to enter the defence sector.
What you'll work with
- Implementing Regulation (EU) 2019/947 (operation of unmanned aircraft)
- Royal Decree 517/2024 (Spanish UAS regulation)
- Organic Law 4/2015 (Spanish Public Safety Law)
- Law 11/2022 (Spanish General Telecommunications Law)
- Regulation (EU) 2016/679 (GDPR)
- Additional Protocol I to the Geneva Conventions (protection of victims of armed conflict)
- Regulation (EU) 2021/821 (dual-use export controls)
- QGIS
- DroneDeploy
- Python with pandas
- Google Earth Pro
8 modules
1.1The growth of civil drones1.2Drones in emergencies and healthcare1.3Drones in agriculture and industry1.4Misuse of drones1.5Threats to infrastructure and events1.6Drones in recent conflicts1.7Public perception of drones1.8Counter-UAS systems: an overview1.9Ethics of response technology1.10Case study: the closure of Gatwick Airport
2.1Necessity and proportionality2.2Precaution towards third parties2.3Distinguishing hostile from legitimate drones2.4Presumption of the pilot's good faith2.5Escalation of the response2.6Risk to crewed aviation2.7Liability for collateral damage2.8Ethics of automating the response2.9Accountability2.10Practical exercise: proportionality matrix for responses
3.1The European UAS Regulation3.2The Spanish UAS Royal Decree3.3Powers of the security forces3.4The Spanish Public Safety Law3.5The Spanish General Telecommunications Law3.6Restrictions on radio jamming3.7Data protection for pilots3.8Ownership of the intercepted aircraft3.9Civil and criminal liability3.10Case study: legal analysis of an interception
4.1Air defence and sovereignty4.2Force protection on deployment4.3IHL principles applied4.4Commercial drones in conflicts4.5Neutrality and airspace4.6Export controls on systems4.7Rules of engagement: the concept4.8International cooperation4.9Lessons from recent conflicts4.10Practical exercise: comparison of civil and military frameworks
5.1Impact on third-party GNSS5.2Interference with civil communications5.3Aircraft falling and ground risk5.4Identification errors5.5False alarms and their impact5.6Cybersecurity of the counter-UAS system5.7Radio-frequency exposure5.8Operational risk assessment5.9Mitigation measures5.10Lab: analysis of fall risk in an urban area
6.1Capture of images and data6.2Identification of the pilot6.3Telemetry data6.4Retention and sharing of data6.5Surveillance at public events6.6Defence rights of the offender6.7Transparency towards citizens6.8Independent oversight6.9Rights impact assessment6.10Workshop: impact assessment of a stadium deployment
7.1Action protocols7.2The decision chain7.3Operator training7.4Inter-agency coordination7.5Logging and auditing of interventions7.6Responsible public procurement7.7Industry and responsibility7.8Public communication7.9Effectiveness and harm indicators7.10Case study: protocol for an international summit
8.1Protection scenario8.2Technologies considered8.3Applicable legal framework8.4Ethical analysis of the response8.5Collateral risks8.6Privacy measures8.7Protocol proposal8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original regulation and applied exercises. The working software is QGIS, DroneDeploy, Python with pandas and Google Earth Pro, in free, academic or evaluation versions. Exercises are based on real procedures: proportionality analysis of responses, fall-risk assessment in urban areas and design of protocols for public events. Assessment is continuous by module, plus the final integrating project.
Standards covered: Implementing Regulation (EU) 2019/947, Royal Decree 517/2024, Organic Law 4/2015, Law 11/2022, Regulation (EU) 2016/679, Additional Protocol I to the Geneva Conventions, Regulation (EU) 2021/821.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with QGIS, DroneDeploy, Python with pandas and Google Earth Pro, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in AM Applications for Rapid Repairs
Online postgraduate diploma of 800 hours in additive manufacturing (AM) applications for rapid repairs, with 8 modules covering repair processes, reverse engineering, DED and cold spray,…
Diploma in Digital Thread in Defence
Online postgraduate diploma of 800 hours in digital thread in defence. 8 modules covering the shift from documents to models, model-based engineering, PLM and configuration management,…
Diploma in Validation of Military PHM Strategies
Online postgraduate diploma of 800 hours in validation of military PHM strategies. 8 modules covering condition-based maintenance, sensors and data acquisition, fault diagnosis, remaining useful life…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships