Diploma in 3D Modelling of Routes and Campaigns
Online postgraduate diploma of 800 hours in 3D modelling of routes and campaigns. 8 modules covering geospatial information, 3D data capture with photogrammetry and LiDAR, terrain modelling and trafficability, route planning, 3D visualisation and simulation, logistics campaign analysis, and quality to INSPIRE and ISO 19157, with an assigned technical tutor.
Diploma in 3D Modelling of Routes and Campaigns — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,400 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Manage geospatial information to a high quality standard.
Capture 3D data using photogrammetry and LiDAR.
Model terrain and its trafficability.
Apply route planning algorithms.
Create 3D visualisations and simulations.
Analyse logistics and emergency campaigns.
Apply standards and ethical criteria to geospatial data.
Who it's for
- GIS technicians moving into 3D terrain and route analysis.
- 3D modelling specialists working with photogrammetry and point clouds.
- Geomatics engineers producing terrain models and digital twins.
- Logistics planners who need terrain-aware route planning.
- Geospatial analysts supporting defence or civil protection.
- Emergency technicians planning evacuations and access routes.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- Directive 2007/2/EC INSPIRE (EU spatial data infrastructure)
- ISO 19115 (geographic metadata)
- ISO 19157 (geographic data quality)
- OGC 3D Tiles (streaming of 3D geospatial content)
- OGC CDB (synthetic environment database for simulation)
- STANAG 2211 (geodetic datums and projections)
- ASPRS Positional Accuracy Standards (accuracy of geospatial data)
- QGIS
- ArcGIS Pro
- Agisoft Metashape
- CesiumJS
- CloudCompare
8 modules
1.1Reference systems and projections1.2Digital elevation models1.3Data sources: satellite, LiDAR and photogrammetry1.4Copernicus and Sentinel1.5Military and civil mapping1.6OGC standards1.7Metadata and quality1.8Spatial data infrastructures1.9Spanish Army Geographic Centre1.10Workshop: loading a DEM in QGIS
2.1Drone photogrammetry2.2Structure from motion2.3Airborne and terrestrial LiDAR2.4Point clouds2.5Georeferencing with GNSS control2.6Point cloud classification2.7Meshes and textures2.8Accuracy and quality control2.9Spain's National Aerial Orthophotography Plan2.10Laboratory: 3D model with photogrammetry
3.1Slope and aspect analysis3.2Terrain trafficability3.3Soil types and bearing capacity3.4Hydrology and watercourses3.5Vegetation and land cover3.6Visibility analysis3.7Terrain models for simulation3.8CDB and 3D Tiles formats3.9Model generalisation3.10Practical exercise: trafficability map
4.1Graph theory4.2Dijkstra and A* algorithms4.3Cost surfaces4.4Vehicle constraints4.5Logistics routes4.6Bridges and critical points4.7Multimodal routes4.8Multi-objective optimisation4.9Routes in emergencies4.10Laboratory: least-cost route with pgRouting
5.1Visualisation engines: Cesium and Unreal5.2Digital twins of the territory5.3Virtual and augmented reality5.4Convoy movement simulation5.5Scenario visualisation5.6Interoperability with simulators5.7Performance and levels of detail5.8Web visualisation5.9Visual storytelling5.10Practical exercise: 3D scene in CesiumJS
6.1Logistics planning6.2Road capacity6.3Time and distance6.4Supply points6.5Sustainment of deployments6.6Civil emergency scenarios6.7Population evacuation6.8Route vulnerability analysis6.9Logistics indicators6.10Case study: flood evacuation plan
7.1The INSPIRE Directive7.2ISO 19100 standards7.3Geospatial STANAGs7.4Data licences7.5Privacy in 3D data7.6Security of geographic information7.7Bias and errors in models7.8Dual use of mapping7.9Professional responsibility7.10Case study: quality audit of a model
8.1Definition of the area8.2Data capture and sources8.3Terrain model8.4Trafficability analysis8.5Route planning8.63D visualisation8.7Quality assessment8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is QGIS, ArcGIS Pro, Agisoft Metashape, CesiumJS and CloudCompare, in free, academic or evaluation versions. Practical work is based on real procedures for 3D modelling with drone photogrammetry, terrain trafficability analysis and least-cost route planning. Assessment is continuous by module, plus the final project.
Standards covered: Directive 2007/2/EC INSPIRE, ISO 19115, ISO 19157, OGC 3D Tiles, OGC CDB, STANAG 2211 and the ASPRS Positional Accuracy Standards.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with QGIS, ArcGIS Pro, Agisoft Metashape, CesiumJS and CloudCompare, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in International Supply Chain and Offset
Online postgraduate diploma of 800 hours in International Supply Chain and Offset. 8 modules covering the international defence supply chain, industrial offsets, export control (ITAR, EAR,…
Diploma in Ethics in Military MBSE
Online postgraduate diploma of 800 hours in ethics in military MBSE. 8 modules covering model-based systems engineering, values in systems engineering, modelling human control, safety and…
Diploma in Nuclear Power Plant Modernisation Programmes
Online postgraduate diploma of 800 hours in nuclear power plant modernisation programmes. 8 modules covering long-term operation, ageing management, I&C modernisation, cybersecurity and human factors, obsolescence…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships