Course on International Environmental Regulation in Nuclear
Online course of 300 h in International Environmental Regulation in Nuclear. 6 modules covering Directive 2011/92/EU (environmental impact assessment), as amended by 2014/52/EU, Euratom Treaty, Articles 35 to 37 (monitoring and discharges) and ERICA Tool (biota dose assessment). Dedicated tutor and enrolment open.
Course on International Environmental Regulation in Nuclear — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$1,010 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the international and European environmental protection framework applicable to nuclear energy.
Apply the environmental impact assessment methodology to a nuclear facility.
Interpret discharge limits and effluent monitoring programmes.
Estimate biota exposure using the reference organism approach.
Analyse the environmental aspects of waste management and decommissioning.
Identify public participation and transboundary consultation obligations.
Prepare an environmental assessment of a nuclear facility case study.
Who it's for
- Environmental assessment officer at nuclear facilities looking to specialise in International Environmental Regulation in Nuclear.
- Environmental radiological monitoring specialist looking to specialise in International Environmental Regulation in Nuclear.
- Environmental impact consultant looking to specialise in International Environmental Regulation in Nuclear.
- Environmental licensing officer looking to specialise in International Environmental Regulation in Nuclear.
- Environmental inspector of radioactive facilities looking to specialise in International Environmental Regulation in Nuclear.
- Environmental regulatory compliance analyst looking to specialise in International Environmental Regulation in Nuclear.
- Engineering or science graduates looking to move into the nuclear industry.
What you'll work with
- Directive 2011/92/EU (environmental impact assessment), as amended by 2014/52/EU
- Euratom Treaty, Articles 35 to 37 (monitoring and discharges)
- Directive 2013/59/Euratom (basic safety standards)
- Espoo Convention (transboundary environmental impact)
- Aarhus Convention (access to information and participation)
- IAEA GSG-10 (prospective radiological environmental impact assessment)
- ICRP Publication 108 (reference animals and plants)
- OSPAR Convention (protection of the North-East Atlantic)
6 modules · 300 h
1.1Environmental impacts of the nuclear cycle1.2Radiological protection of the environment1.3Radionuclides in the environment1.4Natural background radiation1.5Main international instruments1.6International environmental law1.7The precautionary principle1.8Sustainable development1.9IAEA, UNEP and UNSCEAR1.10Case study: impact inventory of a power plant
2.1EIA Directive 2011/92/EU2.2Espoo Convention2.3Transboundary consultations2.4Kiev Protocol on Strategic Environmental Assessment2.5Aarhus Convention2.6Aarhus Compliance Committee2.7Life extensions and EIA2.8Spanish Law 21/2013 on environmental assessment2.9Impact study of a power plant2.10Workshop: EIA structure for a new power plant
3.1Discharge limits and dose constraints3.2OSPAR Convention3.3Barcelona Convention3.4Article 37 of the Euratom Treaty3.5Environmental radiological monitoring programmes3.6Sampling and laboratories3.7Environmental transfer models3.8The representative person3.9Drinking Water Directive 2013/51/Euratom3.10Practical exercise: dose to the representative person
4.1ICRP 108: reference animals and plants4.2Derived consideration reference levels4.3The ERICA tool4.4Ecosystem exposure4.5Ecology of Chernobyl and Fukushima4.6Tiered screening assessment4.7Habitats Directive4.8Marine ecosystems4.9Environmental indicators4.10Lab: biota assessment with ERICA
5.1London Convention and dumping at sea5.2The Joint Convention5.3Environmental assessment of geological disposal5.4Site remediation5.5Uranium mining and tailings5.6Liability for environmental damage5.7Paris and Vienna Conventions5.8Climate litigation and nuclear5.9EU taxonomy and the DNSH principle5.10Case study: remediation of the Saelices el Chico mine
6.1Description of the facility6.2Identifying the applicable framework6.3Characterising the surroundings6.4Effluent assessment6.5Doses to the public and to biota6.6Transboundary consultations6.7Monitoring plan6.8Conclusions6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake period, making it easy to combine with work.
Each module combines theory, guided reading of the original standards and applied exercises. The software used is ERICA Tool (biota dose assessment), RESRAD-BIOTA, PC-CREAM (routine discharge impact), QGIS, R (surveillance data analysis), in free, academic or trial versions. Testing is studied through real procedures from review of environmental impact studies, analysis of environmental radiological monitoring programmes, biota dose assessments. Assessment is continuous for each module, plus a final capstone project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the international and European environmental protection framework applicable to nuclear energy.
Apply the environmental impact assessment methodology to a nuclear facility.
Interpret discharge limits and effluent monitoring programmes.
Estimate biota exposure using the reference organism approach.
Analyse the environmental aspects of waste management and decommissioning.
Where this takes you
Requirements
- No previous qualification is required.
- An internet connection and a computer able to run the programme software.
- A level of English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with ERICA Tool (biota dose assessment), RESRAD-BIOTA, PC-CREAM (routine discharge impact), QGIS, R (surveillance data analysis). Free, academic or trial versions are used, and your tutor will point out a free alternative where one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the capstone project. It is SEIUM's own qualification, not an official state-accredited degree.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Check the credit recognition policy when you enrol.
Related programmes
Long-Term Waste Planning Course
300-hour online course in long-term waste planning. 6 modules covering Directive 2011/70/Euratom (spent fuel and waste management), the Joint Convention on the Safety of Spent Fuel…
Course in Ethics in the Medical Use of Radioisotopes
Online 300-hour course in ethics in the medical use of radioisotopes. 6 modules covering Royal Decree 601/2019 (justification and optimisation in medical exposures), Directive 2013/59/Euratom (basic…
Course in Monte Carlo Applied to Radiation Transport
Online 300-hour course in Monte Carlo applied to radiation transport. 6 modules covering JCGM 101 (propagation of distributions using Monte Carlo), ANSI/ANS-6.1.1 (fluence-to-dose conversion factors) and…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships