Course in Sodium-Cooled Fast Reactors
300-hour online course in sodium-cooled fast reactors. 6 modules covering RCC-MRx (AFCEN, high-temperature reactor components), ASME BPVC Section III, Division 5 (high-temperature reactors) and SAS4A/SASSYS-1. Assigned tutor and enrolment open.
Course in Sodium-Cooled Fast Reactors — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$698 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the physical fundamentals of fast-spectrum reactors.
Describe the plant design and its primary and secondary circuits.
Analyse the neutronics, reactivity coefficients and fuel of fast reactors.
Identify the properties of sodium and the technological requirements for handling it.
Evaluate the inherent safety characteristics and unprotected transients.
Assess the operating experience and future of sodium-cooled fast reactors.
Prepare a technical study on a sodium-cooled fast reactor design.
Who it's for
- Fast reactor engineer looking to specialise in Sodium-Cooled Fast Reactors.
- Neutronics analyst looking to specialise in Sodium-Cooled Fast Reactors.
- Liquid metal thermal-hydraulics engineer looking to specialise in Sodium-Cooled Fast Reactors.
- Sodium technology specialist looking to specialise in Sodium-Cooled Fast Reactors.
- Advanced reactor safety engineer looking to specialise in Sodium-Cooled Fast Reactors.
- Generation IV reactor researcher looking to specialise in Sodium-Cooled Fast Reactors.
- Engineering or science graduates seeking to enter Generation IV reactors.
What you'll work with
- RCC-MRx (AFCEN, high-temperature reactor components)
- ASME BPVC Section III, Division 5 (high-temperature reactors)
- NRC Regulatory Guide 1.232 (design criteria for non-LWR reactors)
- GIF Safety Design Criteria for sodium-cooled fast reactors (SDC)
- IAEA SSR-2/1 (Rev.1) (design of nuclear power plants)
- Directive 2014/87/Euratom (nuclear safety)
6 modules · 300 h
1.1Fast spectrum and absence of moderator1.2Neutron balance and conversion ratio1.3Efficient use of uranium resources1.4Reduction of actinide inventory1.5History of fast reactors and plants built1.6Sodium as a coolant and its properties1.7Thermal advantages of liquid metal1.8Specific hazards of sodium1.9Alternatives: lead, gas and salts1.10Exercise: comparing fast reactor coolants
2.1Pool and loop configurations2.2Vessel, electromagnetic and mechanical pumps2.3Intermediate heat exchangers and secondary sodium circuit2.4Steam generator and its protection2.5High power density core2.6Fuel and cladding for fast spectrum2.7Diversified control and shutdown systems2.8Containment and safety systems2.9Fuel handling under sodium2.10Practice: plant circuit diagram
3.1Cross sections in fast spectrum3.2Reactivity coefficients and their sign3.3Sodium void coefficient3.4Doppler effect and safety margin3.5Oxide, metal, carbide and nitride fuels3.6Achievable burn-up and material damage3.7Breeding zones and inventory management3.8Actinide recycling and americium-bearing fuel3.9Safeguards and material accountancy3.10Practice: calculating the conversion ratio of a core
4.1Handling, melting and purification of sodium4.2Cold traps and impurity control4.3Sodium leak detection4.4Sodium fires and their extinction4.5Sodium-water reaction in the steam generator4.6Hydrogen detection and protection4.7Sodium opacity and inspection challenges4.8In-service inspection in opaque media4.9Maintenance and cleaning of components4.10Practice: sodium leak response plan
5.1Characteristic accident sequences5.2Loss of coolant and loss of flow5.3Reactivity accident and unprotected transients5.4Passive safety and inherent response5.5Material retention in the event of melting5.6Operating experience of historical plants5.7Costs and reasons for the abandonment of some projects5.8Current projects and modular designs5.9Role in waste management5.10Practice: analysing an unprotected transient
6.1Choice of concept and power rating6.2Description of the design and circuits6.3Simplified neutronic design of the core6.4Selection of fuel and materials6.5Analysis of reactivity coefficients6.6Sodium technology and protective measures6.7Analysis of an accident sequence6.8Fuel cycle strategy and safeguards6.9Technical report6.10Defence of the work
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SAS4A/SASSYS-1, Serpent, ERANOS, OpenFOAM, in free, academic or evaluation versions. Case studies are based on real procedures for analysing reactivity coefficients in fast spectrum, studies of unprotected transients and reviews of operating experience of sodium reactors. Assessment is continuous by module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the physical fundamentals of fast-spectrum reactors.
Describe the plant design and its primary and secondary circuits.
Analyse the neutronics, reactivity coefficients and fuel of fast reactors.
Identify the properties of sodium and the technological requirements for handling it.
Evaluate the inherent safety characteristics and unprotected transients.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
You will work with SAS4A/SASSYS-1, Serpent, ERANOS and OpenFOAM. Free, academic or evaluation versions are used, and the tutor will indicate the free alternative where one exists.
An SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the higher-level programme. Please check the recognition policy when you enrol.
Related programmes
Course in Ethics in Accident Scenario Simulation
300-hour online course in ethics in accident scenario simulation. 6 modules with IAEA SSG-2 (Rev. 1) (deterministic safety analysis), IAEA SSG-3 (Rev. 1) (Level 1 probabilistic…
Advanced Nuclear Data Visualisation Course
Online 300 h course in advanced nuclear data visualisation. 6 modules covering NUREG-0700 (human-system interface guidelines), IEC 60964 (control room design for nuclear power plants) and…
Course on Trajectory Modelling in Radiological Environments
Online course of 300 h in Trajectory Modelling in Radiological Environments. 6 modules covering ICRP Publication 103 (ALARA optimisation principle), Directive 2013/59/Euratom (basic safety standards) and…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships