Course in Safety Culture in Radiation Protection
Online 300-hour course in safety culture in radiation protection. 6 modules covering INSAG-4 (safety culture), IAEA GSR Part 2 (leadership and management for safety) and Qualtrics. Assigned tutor and open enrolment.
Course in Safety Culture in Radiation Protection — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$698 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Define safety culture and its characteristics in radiation protection.
Analyse the human and organisational factors that shape it.
Design communication and reporting systems that promote learning.
Apply tools for assessing and measuring culture.
Interpret survey results and indicators.
Plan interventions for sustained improvement.
Develop a culture improvement project for a facility.
Who it's for
- Radiation protection expert who wishes to specialise in Safety Culture in Radiation Protection.
- Safety culture manager who wishes to specialise in Safety Culture in Radiation Protection.
- Human factors specialist who wishes to specialise in Safety Culture in Radiation Protection.
- Supervisor of radioactive facilities who wishes to specialise in Safety Culture in Radiation Protection.
- Organisational safety consultant who wishes to specialise in Safety Culture in Radiation Protection.
- Radiation protection trainer who wishes to specialise in Safety Culture in Radiation Protection.
- Engineering or science graduates seeking to enter nuclear power plants.
What you'll work with
- INSAG-4 (safety culture)
- IAEA GSR Part 2 (leadership and management for safety)
- IAEA GSR Part 3 (radiation protection and safety of radiation sources)
- Directive 2013/59/Euratom (basic safety standards)
- Royal Decree 1029/2022 (protection of health against ionising radiation)
- ISO 45001 (occupational health and safety management)
6 modules · 300 h
1.1Origins of the concept following major accidents1.2Definition by the International Atomic Energy Agency1.3Difference between climate, culture and management system1.4Characteristics of a healthy safety culture1.5Signs of a weakening culture1.6Relationship between culture and radiological outcomes1.7Safety culture versus formal compliance1.8The role of visible leadership1.9Common myths about radiological safety1.10Exercise: rapid diagnosis of a unit
2.1Human error: types and mechanisms2.2Latent conditions and system defences2.3Workload, fatigue and shift work2.4Communication at handover and in work orders2.5Production pressure versus safety2.6Normalisation of deviance2.7Prescribed work versus actual work2.8Designing usable procedures2.9Human reliability tools2.10Practice: analysing an event using a systems approach
3.1Just culture and trust in reporting3.2Event and near-miss reporting systems3.3Classification and prioritisation of reports3.4Root cause analysis and common methods3.5Effective corrective actions versus cosmetic ones3.6Feedback to the reporter3.7Learning from the experience of others3.8Communicating risk to workers3.9Communication with patients, the public and the media3.10Practice: designing a reporting workflow
4.1Safety climate surveys and their validity4.2Interviews and discussion groups4.3Observation of work in the field4.4Leading and lagging indicators4.5Self-assessment and independent evaluation4.6Interpreting results and bias4.7Comparison between units and over time4.8Feeding results back to the organisation4.9Improvement plans based on the diagnosis4.10Practice: building an indicator dashboard
5.1Management commitment and resource allocation5.2Meaningful training, not just for the record5.3Safety walkarounds and field conversations5.4Recognising safe behaviours5.5Managing organisational change5.6Integration with the management system and quality5.7Safety culture in contractors and suppliers5.8Regulatory oversight of culture5.9Sustaining effort over the long term5.10Practice: a twelve-month intervention plan
6.1Choosing the organisation to be studied6.2Designing the diagnosis and its tools6.3Collecting documentary and field evidence6.4Analysis of human and organisational factors6.5Identifying priority weaknesses6.6Improvement plan with owners and deadlines6.7Monitoring indicator system6.8Internal communication plan6.9Diagnosis report6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the enrolment period, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Qualtrics, NVivo, advanced Excel, Power BI, in free, academic or evaluation versions. Case studies draw on real procedures for safety culture surveys, interviews and focus groups, and analysis of event reports. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Define safety culture and its characteristics in radiation protection.
Analyse the human and organisational factors that shape it.
Design communication and reporting systems that promote learning.
Apply tools for assessing and measuring culture.
Interpret survey results and indicators.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
You work with Qualtrics, NVivo, advanced Excel and Power BI. Free, academic or evaluation versions are used, and the tutor indicates a free alternative where one exists.
A SEIUM diploma on passing the continuous assessment and the integrative project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed on a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Nuclear Licensing Course: Regulatory Processes
Online 300-hour course in nuclear licensing: regulatory processes. 6 modules covering IAEA SSG-12 (licensing process for nuclear installations), 10 CFR Part 52 (licences, certifications and approvals…
Course on Ethics in Nuclear Energy and Human Rights
Online course of 300 h in Ethics in Nuclear Energy and Human Rights. 6 modules covering UN Guiding Principles on Business and Human Rights (2011), OECD…
Tokamaks Course: Operation and Design
Online 300-hour course on tokamaks: operation and design. 6 modules covering ASME BPVC Section III, Division 4 (fusion devices), RCC-MRx (mechanical design of high-temperature components) and…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships