CourseDefense, Military Engineering & Land Systems Applications open

Course in Ethics in Military Lobbying

Online 300-hour course in ethics in military lobbying. 6 modules covering Law 19/2013 (transparency, access to public information and good governance), Law 3/2015 (exercise of senior office in the General State Administration) and Advanced Microsoft Excel. Dedicated tutor and open enrolment.

Duration300 h
ModeOnline
Start datesSet by the faculty
AwardSEIUM Institute certificate

Course in Ethics in Military Lobbying — studying from Canada

Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.

Fees for Canada: C$1,010 (Canadian dollar), with instalments and employer sponsorship available.

Relevant bodies in Canada

  • Department of National Defence (DND)
  • Defence Research and Development Canada (DRDC)
  • Canadian Association of Defence and Security Industries (CADSI)
  • Public Services and Procurement Canada

Typical roles

  • Defence Systems Engineer
  • Land Systems Engineer
  • Systems Integration Engineer
  • Sustainment Engineer

Questions from Canada

Which Canadian bodies or processes govern defence engineering recognition?

Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.

Would Canadian defence or land systems employers accept this training?

Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.

Can I study remotely while working, and what are the costs and language demands?

Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Define lobbying activity and its legitimate role in public defence decision-making.

02

Analyse the Spanish and European legal framework on transparency and registers of interest groups.

03

Identify revolving-door situations and conflicts of interest in the sector.

04

Apply the OECD principles on integrity in lobbying to real cases.

05

Design a code of conduct for interest representation in a defence company.

06

Evaluate internal control mechanisms and whistleblowing channels in accordance with Law 2/2023.

07

Draw up a plan to improve the governance of institutional relations.

Profile

Who it's for

  • Public affairs manager in defence who wishes to specialise in Ethics in Military Lobbying.
  • Compliance officer who wishes to specialise in Ethics in Military Lobbying.
  • Public integrity analyst who wishes to specialise in Ethics in Military Lobbying.
  • Conflicts of interest office technician who wishes to specialise in Ethics in Military Lobbying.
  • Institutional relations consultant who wishes to specialise in Ethics in Military Lobbying.
  • Researcher in transparency and governance who wishes to specialise in Ethics in Military Lobbying.
  • Engineering or science graduates seeking to enter the defence industry.
Standards & tools

What you'll work with

  • Law 19/2013 (transparency, access to public information and good governance)
  • Law 3/2015 (exercise of senior office in the General State Administration)
  • Interinstitutional Agreement of 20 May 2021 on the EU Transparency Register
  • OECD Recommendation on Principles for Transparency and Integrity in Lobbying
  • Directive (EU) 2019/1937 (protection of whistleblowers)
  • Law 2/2023 (protection of whistleblowers)
  • ISO 37001 (anti-bribery management systems)
  • United Nations Convention against Corruption (2003)
Syllabus

6 modules · 300 h

  1. 1.1Definition of interest representation
  2. 1.2Legitimate lobbying versus influence peddling
  3. 1.3Actors: companies, associations, law firms and consultancies
  4. 1.4Formal and informal channels of influence
  5. 1.5The defence sector and its particularities
  6. 1.6Asymmetry of resources between interests
  7. 1.7The role of technical information in public decision-making
  8. 1.8Sector vocabulary
  9. 1.9Information sources and available registers
  10. 1.10Exercise: mapping the actors in a decision
  1. 2.1Transparency registers and their mandatory nature
  2. 2.2The EU register and its scope
  3. 2.3National and regional regulation
  4. 2.4Legislative footprint and publication of meetings
  5. 2.5Codes of conduct for interest representatives
  6. 2.6Rules on senior officials and cooling-off periods
  7. 2.7Incompatibilities and asset declarations
  8. 2.8Funding of political parties and foundations
  9. 2.9Sanctioning regime
  10. 2.10Practice: analysing compliance with a register
  1. 3.1Movements between administration and industry
  2. 3.2Cooling-off periods and their effectiveness
  3. 3.3Regulatory capture and warning signs
  4. 3.4External advisers with dual ties
  5. 3.5Retired military personnel in industry
  6. 3.6Technical committees and their composition
  7. 3.7Funding of studies and reports
  8. 3.8Think tanks and transparency of funds
  9. 3.9Institutional management of these conflicts
  10. 3.10Practice: assessing a revolving-door case
  1. 4.1Accuracy of the information provided
  2. 4.2Disclosure of identity and client
  3. 4.3Prohibition of improper inducements
  4. 4.4Respect for public decisions and their timing
  5. 4.5Hospitality, travel and sponsorship
  6. 4.6Use of third parties and indirect campaigns
  7. 4.7Astroturfing and false associations
  8. 4.8Responsibility of the lobbying professional
  9. 4.9Public commitments and their verification
  10. 4.10Debate: a case with blurred boundaries
  1. 5.1Internal policy on interest representation
  2. 5.2Training and prior approval of contacts
  3. 5.3Internal register of meetings and positions
  4. 5.4Oversight by the board of directors
  5. 5.5Audit of lobbying activity
  6. 5.6Proactive transparency by the company
  7. 5.7The role of the press and civil society
  8. 5.8The most frequently proposed reforms to the system
  9. 5.9International comparison of models
  10. 5.10Practice: drafting a lobbying policy
  1. 6.1Choice of organisation and objective
  2. 6.2Map of decision-makers and competing interests
  3. 6.3Analysis of the applicable legal framework
  4. 6.4Identification of ethical risks
  5. 6.5Design of the internal policy
  6. 6.6Registration and approval procedure
  7. 6.7Proactive transparency plan
  8. 6.8Indicators and audit
  9. 6.9Proposal report
  10. 6.10Defence of the project
Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine the course with work.

Each module combines theory, guided reading of the original regulation and applied exercises. The working software is Advanced Microsoft Excel, Microsoft Power BI, NVivo, Gephi, in free, academic or evaluation versions. Case studies are based on real procedures: analysis of public registers of interest groups, mapping of influence networks and revolving doors, and simulated meetings with public decision-makers. Assessment is continuous by module, plus the final integrative project.

Accredited laboratories(EN ISO/IEC 17025) with rotor test rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-driven Master's Thesis:safety case, test plan, compliance dossier and operational limits.
Industry-led mentoring:lecturers with a track record in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with cyber-OT, DIH and compliance as its pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Choice of organisation and objective

Define lobbying activity and its legitimate role in public defence decision-making.

Map of decision-makers and competing interests

Analyse the Spanish and European legal framework on transparency and registers of interest groups.

Analysis of the applicable legal framework

Identify revolving-door situations and conflicts of interest in the sector.

Identification of ethical risks

Apply the OECD principles on integrity in lobbying to real cases.

Design of the internal policy

Design a code of conduct for interest representation in a defence company.

Career opportunities

Where this takes you

Public affairs manager in defenceCompliance officerPublic integrity analystConflicts of interest office technicianInstitutional relations consultantResearcher in transparency and governance
Admissions & scholarships

Requirements

  • No prior qualification required.
  • Internet connection and a computer capable of running the programme's software.
  • Sufficient level of Spanish to follow technical regulatory texts.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

FAQ

Frequently asked questions

The programme totals 300 hours, spread over 3 to 5 months. That is between 10 and 15 hours a week on average, compatible with full-time work.

You will work with Advanced Microsoft Excel, Microsoft Power BI, NVivo, Gephi. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

An own SEIUM diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.

Yes. Modules passed in a Course or Postgraduate Diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.

Course in Ethics in Military LobbyingEnrol
Scroll to Top
SEIUM – Institute of Advanced Engineering
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.