Course in Ethics in Infrastructure Testing
Online 300-hour course in ethics in infrastructure testing. 6 modules covering ISO 13822 (assessment of existing structures), EN 1990 (Eurocode: basis of structural design) and SAP2000. Assigned tutor and open enrolment.
Course in Ethics in Infrastructure Testing — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,010 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the testing techniques used on existing infrastructure and their limitations.
Plan public safety measures during tests on infrastructure in service.
Apply principles of honesty and prudence when issuing structural diagnoses.
Analyse the specific obligations of critical infrastructure and infrastructure of defence interest.
Assess the impact of testing on heritage and the environment.
Manage the confidentiality of sensitive infrastructure information.
Design an ethical inspection campaign for a real infrastructure.
Who it's for
- Structural inspection engineer looking to specialise in Ethics in Infrastructure Testing.
- Non-destructive testing technician looking to specialise in Ethics in Infrastructure Testing.
- Health and safety manager on site looking to specialise in Ethics in Infrastructure Testing.
- Critical infrastructure manager looking to specialise in Ethics in Infrastructure Testing.
- Heritage conservation engineer looking to specialise in Ethics in Infrastructure Testing.
- Structural diagnosis consultant looking to specialise in Ethics in Infrastructure Testing.
- Graduates in engineering or sciences seeking to move into civil engineering.
What you'll work with
- ISO 13822 (assessment of existing structures)
- EN 1990 (Eurocode: basis of structural design)
- Directive (EU) 2022/2557 (resilience of critical entities)
- Law 8/2011 (protection of critical infrastructure)
- Law 16/1985 (Spanish Historical Heritage)
- Royal Decree 1627/1997 (health and safety on construction sites)
- Venice Charter (1964)
6 modules · 300 h
1.1Typologies: bridges, tunnels, dams and buildings1.2Non-destructive versus destructive testing1.3Assessment of existing structures to ISO 138221.4Core extraction to EN 137911.5Corrosion potential to ASTM C8761.6Static and dynamic load testing1.7Structural health monitoring1.8Drone and laser scanner inspection1.9Critical infrastructure and its classification1.10Workshop: inspection plan for a bridge
2.1Impacts on traffic and users2.2Closures and diversions: proportionality2.3Risks to workers at height and in confined spaces2.4Signage and coordination with authorities2.5Emergency plans during load tests2.6Prior information for neighbours and users2.7Night-time testing and nuisance2.8Insurance and liability for property2.9Lessons from the Morandi Bridge collapse2.10Case study: load test on an urban bridge
3.1Communicating serious deficiencies3.2Political and budgetary pressure3.3Classification of damage and urgency levels3.4Consultant conflicts of interest3.5Independence of inspection from the maintainer3.6Uncertainty and its communication to non-specialists3.7Duty to warn of imminent risk3.8Recording and archiving of reports3.9Criminal and professional liability of the engineer3.10Practice: writing a report with critical findings
4.1Directive (EU) 2022/2557 on resilience of critical entities4.2Dual-use civil-military infrastructure4.3Military mobility and load-bearing capacity4.4Confidentiality of detected vulnerabilities4.5Responsible publication of results4.6Cybersecurity in monitoring systems4.7NIS2 Directive and essential operators4.8Third-party access to inspection data4.9Protection of infrastructure under humanitarian law4.10Case study: vulnerability data for a strategic bridge
5.1Minimising damage in destructive tests5.2Infrastructure of heritage value5.3Environmental footprint of testing campaigns5.4Management of concrete and steel waste5.5Life extension versus replacement5.6Life cycle assessment to ISO 140405.7Territorial justice in investment prioritisation5.8Citizen participation in decisions5.9Open data transparency for infrastructure5.10Workshop: prioritising interventions using ethical criteria
6.1Selection of a real infrastructure6.2Definition of objectives and tests6.3Public safety plan6.4Management of sensitive data6.5Protocol for communicating findings6.6Environmental impact assessment6.7Budget and prioritisation6.8Conflict of interest analysis6.9Report and presentation6.10Final review with the tutor
How you'll learn
Fully 100 % online training on the SEIUM campus, with downloadable material, recorded lessons and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SAP2000, CloudCompare, Autodesk ReCap, QGIS, in free, academic or evaluation versions. Testing is studied through real procedures for load tests on bridges and structures, in-situ non-destructive testing inspections, and laser scanning and photogrammetry surveys. Assessment is continuous by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the testing techniques used on existing infrastructure and their limitations.
Plan public safety measures during tests on infrastructure in service.
Apply principles of honesty and prudence when issuing structural diagnoses.
Analyse the specific obligations of critical infrastructure and infrastructure of defence interest.
Assess the impact of testing on heritage and the environment.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with SAP2000, CloudCompare, Autodesk ReCap and QGIS. Free, academic or evaluation versions are used, and the tutor will indicate the free alternative where one exists.
A SEIUM own diploma upon passing continuous assessment and the integrative project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Please check the recognition policy when enrolling.
Related programmes
Course in Ethics in Academic Impact Testing
300-hour online course in ethics in academic impact testing. 6 modules covering ISO 148-1 (Charpy notched-bar impact test), ASTM E23 (notched-specimen impact tests) and LS-DYNA. Assigned…
Course in Airspace Regulation for UAS
Online 300-hour course in airspace regulation for UAS. 6 modules covering Implementing Regulation (EU) 2019/947 (UAS operations), Delegated Regulation (EU) 2019/945 (UAS systems) and ENAIRE Insignia.…
Course in Ethics in Military Innovation in Universities
Online 300 h course in ethics in military innovation in universities. 6 modules covering Regulation (EU) 2021/821 (control of dual-use items), Regulation (EU) 2021/695 (Horizon Europe…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships