Course in Ethics in Academic Electrification of Deployments
Online 300-hour course in ethics in academic electrification of deployments. 6 Modules Covering IEC 60364 (Low-Voltage Electrical Installations), Royal Decree 842/2002 (Electrotechnical Regulation for Low Voltage) and HOMER Pro. Assigned Tutor and Open Enrollment.
Course in Ethics in Academic Electrification of Deployments — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$698 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe electrification architectures for temporary deployments.
Apply electrical safety requirements to protect people.
Size microgrids with renewable generation and storage.
Assess local impact and equity in access to energy.
Identify battery risks and their management at end of life.
Apply principles of responsible research to energy projects.
Design a responsible electrification project for a deployment.
Who it's for
- Microgrid engineer who wants to specialise in Ethics in Academic Electrification of Deployments.
- Researcher in isolated energy systems who wants to specialise in Ethics in Academic Electrification of Deployments.
- Electrical safety technician who wants to specialise in Ethics in Academic Electrification of Deployments.
- Energy storage engineer who wants to specialise in Ethics in Academic Electrification of Deployments.
- Consultant in energy access who wants to specialise in Ethics in Academic Electrification of Deployments.
- Electrification project manager who wants to specialise in Ethics in Academic Electrification of Deployments.
- Graduates in engineering or science looking to enter universities.
What you'll work with
- IEC 60364 (low voltage electrical installations)
- Royal Decree 842/2002 (Electrotechnical Regulation for Low Voltage)
- IEEE 2030.7 (microgrid controllers)
- IEEE 1547 (Interconnection of Distributed Resources)
- IEC 62257 (renewable systems for rural electrification)
- IEC 62619 (industrial lithium battery safety)
- Royal Decree 614/2001 (Electrical Risk)
6 modules · 300 h
1.1Electrical needs of a deployment1.2Generator sets and fuel consumption1.3Distribution networks in the field1.4IEC 60364 applied to temporary installations1.5Earthing on difficult terrain1.6Interconnection with local networks1.7University research in deployable energy1.8Ethical values in electrical engineering1.9Human cost of fuel convoys1.10Case study: electrical balance of a camp
2.1Electrical risk: Real Decreto 614/20012.2Protection against direct and indirect contact2.3Training and qualification of operators2.4Provisional and temporary installations2.5Fire prevention in modules2.6Safety of non-specialist personnel2.7Lighting and night-time safety2.8Investigation of electrical accidents2.9Designer's responsibility2.10Practice: electrical risk assessment of a temporary installation
3.1Hybrid microgrids: diesel, solar and batteries3.2Energy management systems3.3Lithium batteries: risks and recycling3.4Critical minerals and their supply chain3.5Power quality and sensitive loads3.6Resilience against attacks and failures3.7Cybersecurity of microgrids3.8Academic research on tactical microgrids3.9Testing and validation of prototypes3.10Laboratory: simulation of a microgrid in HOMER
4.1Access to energy for the local population4.2Sharing energy with communities: benefits and risks4.3Noise pollution and emissions4.4Use of local resources and competition4.5Infrastructure legacy after withdrawal4.6SDG 7: affordable and clean energy4.7Civil-military cooperation projects4.8Dependency and sustainability of the legacy4.9Transparency towards local authorities4.10Case study: handover of a microgrid to a community
5.1Defence funding in university energy research5.2Dual use of energy technologies5.3Field trials and safety5.4Publication and confidentiality5.5Students in defence-related projects5.6Research ethics committee5.7Assessment of unintended impacts5.8Consumption data and privacy5.9Responsible innovation in energy5.10Workshop: ethical assessment of an energy research project
6.1Deployment scenario and demand6.2Design of the electrical architecture6.3Electrical safety analysis6.4Environmental impact assessment6.5Social impact analysis6.6Legacy and handover plan6.7Economic and fuel evaluation6.8Monitoring indicators6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is HOMER Pro, MATLAB/Simulink, PVsyst, DIgSILENT PowerFactory, in free, academic or evaluation versions. Tests are studied using real microgrid laboratory procedures, hybrid system simulation and electrical safety analysis. Assessment is continuous, by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe electrification architectures for temporary deployments.
Apply electrical safety requirements to protect people.
Size microgrids with renewable generation and storage.
Assess local impact and equity in access to energy.
Identify battery risks and their management at end of life.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You work with HOMER Pro, MATLAB/Simulink, PVsyst, DIgSILENT PowerFactory. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM's own diploma on passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
NATO Standards Course in Armour Validation
Online 300 h course in NATO standards for armour validation. 6 modules covering STANAG 4569 (vehicle protection levels), AEP-55 (protection assessment procedures) and LS-DYNA. Assigned tutor…
Course in Export Control of Explosives and Detonators
Online 300-hour course in export control of explosives and detonators. 6 modules covering Royal Decree 130/2017 (Explosives Regulation), Law 53/2007 (control of foreign trade in defence…
NATO Standards in Digital Governance Course
Online 300-hour course in NATO standards for digital governance. 6 modules with ISO/IEC 38500:2024 (IT governance), NATO Architecture Framework v4 (NAF) and Sparx Enterprise Architect. Assigned…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships