Aerial–Ground Interoperability Standards Course
Online 300-hour course on air–ground interoperability standards. 6 modules covering STANAG 5516 (Link 16), MIL-STD-6016 (Link 16 messaging) and Wireshark. Assigned tutor and open enrolment.
Aerial–Ground Interoperability Standards Course — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,160 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the interoperability issues between air and ground platforms.
Interpret tactical data exchange standards.
Design interoperable communications architectures and networks.
Apply labelling and protection to shared information.
Plan the validation and testing of interoperability.
Define joint operating procedures.
Develop an air–ground interoperability project.
Who it's for
- Tactical data link engineer wishing to specialise in air–ground interoperability standards.
- Systems interoperability engineer wishing to specialise in air–ground interoperability standards.
- Communications network engineer wishing to specialise in air–ground interoperability standards.
- Information security specialist wishing to specialise in air–ground interoperability standards.
- Integration and test engineer wishing to specialise in air–ground interoperability standards.
- Command and control systems analyst wishing to specialise in air–ground interoperability standards.
- Graduates in engineering or science seeking to enter the defence industry.
What you'll work with
- STANAG 5516 (Link 16)
- MIL-STD-6016 (Link 16 messaging)
- STANAG 4586 (UAV control)
- STANAG 4609 (digital motion video)
- STANAG 4774 (confidentiality labels)
- STANAG 5066 (HF data)
- ISO/IEC 27001 (information security)
6 modules · 300 h
1.1What interoperability means and at which levels1.2Technical, procedural and human interoperability1.3Actors: air platform, command post and ground unit1.4Time-critical information needs1.5Common operational picture and situational awareness1.6Classic incompatibility problems1.7The cost of non-interoperability1.8Certification and accreditation framework1.9Field vocabulary and acronyms1.10Exercise: map of actors and information flows
2.1Families of tactical messaging standards2.2Data models and data dictionaries2.3Geospatial information exchange formats2.4Common symbology and cartographic representation2.5Entity identification and tracking2.6Timestamps, references and coordinate systems2.7Standard versions and backward compatibility2.8Implementation profiles and interface agreements2.9Configuration management of standards2.10Practice: define an interface profile
3.1Data links and their characteristics3.2Software-defined radio and waveforms3.3Mobile tactical networks and routing3.4Spectrum management and frequency assignment3.5Quality of service and traffic prioritisation3.6Degraded links and intermittent operation3.7Gateways and translation between systems3.8Satellite communications as a complement3.9Latency and its effect on coordination3.10Practice: communications architecture design
4.1Classification levels and separated domains4.2Cross-domain exchange and controlled gateways4.3Authentication and identity management4.4Encryption and management of cryptographic material4.5Need-to-know policy and compartmentalisation4.6Audit logging and traceability4.7Protection against interference and spoofing4.8Information exchange agreements with partners4.9Applicable personal data protection4.10Practice: information exchange policy
5.1Conformity testing against the standard5.2Interoperability testing between systems5.3Integration benches and reference laboratories5.4Validation exercises and campaigns5.5Operating procedures and communication orders5.6Joint training and staff preparation5.7Incident management and lessons learned5.8Documentation of capabilities and interfaces5.9Maintaining interoperability over time5.10Practice: validation campaign plan
6.1Choice of the coordination scenario6.2Map of systems and interfaces6.3Selection of standards and profiles6.4Proposed communications architecture6.5Information security policy6.6Interoperability test plan6.7Associated operating procedures6.8Staff training plan6.9Technical report on the scenario6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Wireshark, MATLAB, Sparx Enterprise Architect, Python, in free, academic or evaluation versions. Tests are studied using real procedures for analysing tactical message flows, integration testing in the laboratory and interoperability exercises. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the interoperability issues between air and ground platforms.
Interpret tactical data exchange standards.
Design interoperable communications architectures and networks.
Apply labelling and protection to shared information.
Plan the validation and testing of interoperability.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documents.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours a week on average, compatible with full-time work.
The programme uses Wireshark, MATLAB, Sparx Enterprise Architect and Python. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An SEIUM own diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Total Quality and Defence Course: Academic Perspective
Online course of 300 h in total quality and defence: academic perspective. 6 modules covering ISO 9001 (quality management systems), AQAP 2110 (NATO quality assurance requirements)…
Course in International Regulation in Tactical Energy
300-hour online course in international regulation in tactical energy. 6 modules covering IEC 60364 (low-voltage electrical installations), Real Decreto 842/2002 (Low-Voltage Electrotechnical Regulation) and HOMER Pro.…
Course in Ethics in Secure Military Communications
Online 300-hour course in ethics in secure military communications. 6 modules covering ISO/IEC 15408 (Common Criteria), FIPS 140-3 (cryptographic modules) and GNU Radio. Assigned tutor and…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships