Postgraduate Diploma in Calibration for Synthetic Fuels
Online 800-hour postgraduate diploma in calibration for synthetic fuels. 8 modules covering EN 228, FIA Formula 1 Technical Regulations and ETAS INCA. Assigned tutor and open enrolment.
Postgraduate Diploma in Calibration for Synthetic Fuels — studying from Australia
Australia no longer manufactures passenger vehicles at scale, but automotive engineering remains significant through component suppliers, design and engineering services, fleet operations and a strong motorsport culture. Engineers contribute to vehicle testing, powertrain development, vehicle dynamics and aftermarket product development. Motorsport activity centres on categories such as Supercars, which draws engineering talent from across the country. Employers include major global suppliers, dealership groups, fleet operators and specialist engineering consultancies working with manufacturers.
Fees for Australia: A$1,740 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Which Australian bodies matter for automotive engineering recognition?
Engineers Australia is the main professional body for engineers and sets the standards for Chartered Professional Engineer status, which generally requires an accredited qualification. Automotive standards in Australia are overseen by bodies such as the Department of Infrastructure and vehicle compliance agencies. SEIUM's private qualifications are not accredited by these bodies, so their value depends on employer assessment.
What automotive careers and employers in Australia could this support?
Australia has automotive suppliers, vehicle engineering firms, motorsport teams and fleet operators, along with a growing mobility sector. Employers typically look at demonstrated technical skills, project work and experience. A SEIUM qualification may support your application, but whether it is recognised is for each employer to decide.
Can I manage this online course alongside a full-time job in Australia?
Yes, the courses are 100% online and taught in English, so you can study around work and from home without a student visa. Specialist courses take 300 hours, postgraduate diplomas 800 hours and master's 1,900 hours. Each student has an assigned technical tutor, and employer-funded training may be possible in some cases.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Characterise synthetic fuels for spark-ignition engines.
Configure engine management systems for calibration.
Calibrate injection considering fuel properties.
Adjust ignition while controlling knock.
Evaluate performance and emissions on the bench.
Apply design of experiments to calibration.
Validate calibrations under track conditions.
Who it's for
- Engine calibration engineer who wants to specialise in Calibration for Synthetic Fuels.
- Combustion engineer who wants to specialise in Calibration for Synthetic Fuels.
- Test bench engineer who wants to specialise in Calibration for Synthetic Fuels.
- Powertrain engineer who wants to specialise in Calibration for Synthetic Fuels.
- Competition engine technician who wants to specialise in Calibration for Synthetic Fuels.
- Fuels engineer who wants to specialise in Calibration for Synthetic Fuels.
- Graduates in engineering or science looking to enter motorsport.
What you'll work with
- EN 228
- FIA Formula 1 Technical Regulations
- ASAM MCD-2 MC
- ISO 1585
- SAE J1349
- ASTM D2699
- ASTM D2700
- UN ECE R85
8 modules · 800 h
1.1Composition of synthetic petrols1.2Differences from fossil petrol1.3Fuel regulations in competition1.4Calorific value and stoichiometry1.5Octane rating and sensitivity1.6Volatility and cold start1.7Oxygenates and air-fuel ratio1.8Lubricity and effect on injectors1.9Fuel supply in competition1.10Case study: analysis of a sustainable fuel
2.1ECU architecture2.2Pressure, lambda and knock sensors2.3High-pressure direct injection2.4Ignition and coils2.5Base maps and corrections2.6Closed-loop lambda control2.7A2L and XCP communication2.8Bench data logging2.9Engine safeguards2.10Practical: configuring an ECU on the bench
3.1Injector characterisation3.2Injection time and rail pressure3.3Multiple injection phasing3.4Lambda adjustment by speed and load3.5Compensation for fuel density3.6Mixture formation and spray3.7Calibration under transients3.8Wall film and compensation3.9Start-up and warm-up3.10Laboratory: lambda adjustment on the engine bench
4.1Optimal MBT timing4.2Knock limit4.3Knock sensors and filtering4.4Adaptive knock control4.5In-cylinder pressure and indicating4.6Cyclic combustion variation4.7Influence of intake air temperature4.8Maps by fuel4.9Engine protection4.10Workshop: in-cylinder pressure analysis
5.1Power and torque on the bench5.2Specific fuel consumption5.3Indicated thermal efficiency5.4CO, HC and NOx emissions5.5Particulates in direct injection5.6Exhaust temperature5.7Impact of fuel on the turbocharger5.8Comparison with reference fuel5.9Correction for ambient conditions5.10Case study: bench comparison of two fuels
6.1Design of experiments in calibration6.2Engine response models6.3Constrained optimisation6.4Model-based calibration6.5Bench automation6.6Management of large data volumes6.7Statistical analysis tools6.8Model validation6.9Export to ECU maps6.10Practical: DoE for timing and lambda
7.1Transition from bench to track7.2Lambda and knock data per lap7.3Corrections for altitude and temperature7.4Consistency between fuel batches7.5Fuel sampling at events7.6Component reliability7.7Driver feedback7.8Weekend adjustments7.9Validation report7.10Case study: knock correction in a hot race
8.1Fuel characterisation8.2ECU configuration8.3Injection calibration8.4Ignition calibration8.5DoE and optimisation8.6Emissions evaluation8.7Track validation plan8.8Final recommendations and future lines8.9Dissertation and presentation8.10Final review with the tutor
How you'll learn
Fully 100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ETAS INCA, AVL CAMEO, AVL IndiCom, MoTeC M1 Tune, MATLAB, in free, academic or evaluation versions. Tests are studied using real engine calibration procedures on a dynamic test bench, in-cylinder pressure analysis and map validation in track tests. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Characterise synthetic fuels for spark-ignition engines.
Configure engine management systems for calibration.
Calibrate injection considering fuel properties.
Adjust ignition while controlling knock.
Evaluate performance and emissions on the bench.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow the reading of technical regulations.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 800 hours in total, spread over 6 to 8 months. That is between 10 and 15 hours a week on average, compatible with a full-time job.
The programme works with ETAS INCA, AVL CAMEO, AVL IndiCom, MoTeC M1 Tune, MATLAB. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or diploma in the same area are credited towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Diploma in Safety and Materials for H₂: Compatibility and Testing
Online postgraduate diploma of 800 hours in hydrogen safety and materials. 8 modules covering hydrogen properties and hazards, hydrogen embrittlement, material compatibility, material testing, component and…
Diploma in EU Taxonomy, Eligibility and Substantial Contribution
Online postgraduate diploma of 800 hours in EU Taxonomy, Eligibility and Substantial Contribution: 8 modules covering the EU Taxonomy Regulation, activity eligibility, substantial contribution, DNSH, minimum…
Diploma in Latin NCAP and Regional Launch Strategy
Online postgraduate diploma of 800 hours in Latin NCAP and regional launch strategy. 8 modules covering assessment protocols, country-by-country regulatory requirements, product engineering for the region,…
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships