Master’s in Specific Verticals Engineering
Online master's programme of 1,900 hours in vertical-market electronics engineering, structured in 12 modules covering electronics for energy and smart grids, space, agriculture, buildings, defence (academic framework), harsh industrial environments, transport and healthcare, plus sector reliability and qualification and multi-sector product strategy, with an assigned technical tutor.
Master’s in Specific Verticals Engineering — studying from Australia
Electronics and embedded systems underpin a wide range of Australian industries, including defence, mining automation, medical devices and consumer technology. The telecommunications sector is significant, with ongoing investment in fibre, mobile networks and satellite communications for remote regions. Research organisations such as CSIRO and university groups contribute to advances in sensing, communications and signal processing. Engineers typically work on hardware design, firmware development, testing and certification. Employers include telecommunications carriers, defence contractors, instrumentation companies and product manufacturers.
Fees for Australia: A$14,200 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this qualification recognised for electronics engineering in Australia?
SEIUM's qualifications are private and not official state degrees, and they are not accredited by Engineers Australia or the Australian Communications and Media Authority. Recognition for electronics and telecom roles generally depends on accredited degrees, licences and experience. Employers or the relevant body make the final decision.
Which Australian employers hire embedded and telecom engineers?
Australia has telecommunications carriers, defence electronics firms, medical device makers, mining technology companies and IoT developers. Employers mostly assess your hands-on skills, project record and certifications. Ask prospective employers whether they would consider a private online qualification.
Can I study this part-time while working, and how is it supported?
The courses are 100% online and taught in English, so you can study from anywhere in Australia without needing a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. Each student has an assigned technical tutor, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the technical and regulatory requirements of the main vertical markets.
Adapt electronic design to harsh environments and regulated sectors.
Apply the qualification and reliability standards specific to each sector.
Analyse the requirements of electronics for energy, space and buildings.
Understand the ethical and regulatory framework of dual-use electronics.
Design reusable platform strategies across sectors.
Develop the technical and certification plan for a vertical product.
Who it's for
- Electronic product engineers
- Qualification and reliability engineers
- Technical business development managers
- Hardware design engineers
- Certification engineers
- Multi-sector product managers
- Engineering or science graduates looking to move into the energy sector
What you'll work with
- IEC 61850-3 (environmental requirements for substation equipment)
- ECSS-Q-ST-60C (EEE components for space)
- MIL-STD-810H (environmental engineering and laboratory tests)
- IEC 60079-11 (intrinsic safety for explosive atmospheres)
- AEC-Q100 (automotive integrated circuit qualification)
- IPC-A-610 (acceptability of electronic assemblies)
- ISO 11783 (ISOBUS for agricultural machinery)
- IEC 60601-1 (safety of medical electrical equipment)
- Altium Designer
- Ansys Sherlock
- MATLAB/Simulink
- SiliconExpert
- LTspice
12 modules · 1900 h
1.1What sets a vertical market apart1.2Environmental, service-life and reliability requirements1.3Classification of operating environments1.4Long product cycles and obsolescence1.5Certifications as a barrier to entry1.6Sector-specific supply chains1.7Qualification costs by sector1.8Multi-sector platform strategies1.9Market analysis and opportunities1.10Case study: requirements matrix for five sectors
2.1Smart metering and meters2.2Substation protection and control2.3IEC 61850 and GOOSE communications2.4Electronics for grid-connected inverters2.5Grid connection requirements2.6Stationary battery management2.7Compatibility with grid disturbances2.8Testing of substation equipment2.9Cybersecurity in power systems2.10Practical exercise: specification of a protection IED
3.1The space environment: radiation and vacuum3.2Total ionising dose and single-event effects3.3Qualified and COTS components in space3.4ECSS standards for electronic products3.5Radiation-tolerant design3.6CubeSat electronics3.7Thermal management in vacuum3.8Thermal-vacuum and vibration testing3.9Space product quality and control3.10Case study: radiation budget for a LEO mission
4.1Soil and climate sensors4.2ISOBUS electronics for agricultural machinery4.3Autonomous remote stations4.4Water quality monitoring4.5Sensor networks in open fields4.6Protection against moisture and dust4.7Autonomous solar power supply4.8Agricultural drones and their electronics4.9Electronics for food traceability4.10Workshop: design of an agro-climatic station
5.1Building management systems5.2KNX, BACnet and Modbus protocols5.3The connected home with Matter5.4DALI lighting control5.5HVAC and efficiency5.6Security and access control5.7Regulations for electrical installations in buildings5.8Energy Performance of Buildings Directive5.9Integration of self-consumption and EV charging5.10Practical exercise: DALI and KNX integration in an office
6.1General requirements of defence systems6.2MIL-STD standards as a design reference6.3MIL-STD-810 environmental testing6.4MIL-STD-461 electromagnetic compatibility6.5Export controls and dual use6.6Ethics in defence engineering6.7Long-term obsolescence management6.8Quality according to AQAP6.9Security of classified information: principles6.10Case study: requirements for a dual-use item of equipment
7.1Extended temperature ranges7.2Explosive atmospheres and ATEX certification7.3Intrinsic safety in electronics7.4Protection against vibration and shock7.5Applying conformal coatings7.6Industrial electromagnetic immunity7.7Industrial power supplies7.8Electronics for mining and oil7.9Maintenance in hazardous environments7.10Lab: intrinsic safety assessment of a sensor
8.1Automotive requirements in summary8.2On-board railway electronics8.3Marine and offshore electronics8.4Electronics for general aviation8.5Light electric mobility8.6Intelligent transport systems8.7Vibration and mobile environments8.8Vehicle power supply8.9Certifications by mode of transport8.10Workshop: comparison of requirements across transport modes
9.1Classification of medical devices9.2Non-medical wellness devices9.3Medical electrical safety9.4Biocompatibility of enclosures9.5Home-use devices9.6Electronics for remote patient monitoring9.7Health data privacy9.8The boundary between wellness products and medical devices9.9Regulated development cycle9.10Practical exercise: regulatory classification of three devices
10.1AEC-Q component qualification standards10.2IPC reliability classes10.3Reliability prediction by sector10.4Board qualification testing10.5Component obsolescence management10.6Counterfeit component detection10.7Lot traceability10.8Warranty and service life10.9Field failure analysis10.10Case study: qualification plan for two sectors
11.1Adaptable modular architectures11.2Shared hardware platforms11.3Variant and configuration management11.4Reusing certifications across sectors11.5Sector partners and channels11.6Business models by vertical11.7Entry costs and return11.8Product roadmap11.9Intellectual property protection11.10Workshop: adapting a platform to another sector
12.1Selection of the sector and the product12.2Analysis of sector requirements12.3Proposed electronic architecture12.4Design and component selection12.5Qualification and test plan12.6Certification strategy12.7Market and cost analysis12.8Conclusions on the vertical product12.9Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within the intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Altium Designer, Ansys Sherlock, MATLAB/Simulink, SiliconExpert and LTspice, in free, academic or evaluation versions. Practical work is based on real procedures: comparative analysis of environmental and regulatory requirements across sectors, qualification test planning for electronic boards and intrinsic safety assessment of equipment for explosive atmospheres. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: IEC 61850-3, ECSS-Q-ST-60C, MIL-STD-810H, IEC 60079-11, AEC-Q100, IPC-A-610, ISO 11783, IEC 60601-1.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- Internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Altium Designer, Ansys Sherlock, MATLAB/Simulink, SiliconExpert and LTspice, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Predictive Maintenance
Online master's programme of 1,900 hours in predictive maintenance — vibration and acoustic analysis, models and deployment in the plant. 12 modules covering maintenance strategies, vibration…
Master’s in Industrial Edge and Data Engineering
Online master's programme of 1,900 hours in industrial edge and data engineering (time series, historians, pipelines and BI). 12 modules covering plant data, connectivity and acquisition,…
Master’s in Time-Sensitive Networking (TSN)
Online master's programme of 1,900 hours in Time-Sensitive Networking (TSN): determinism over Ethernet, profiles and testing. 12 modules covering deterministic Ethernet, time synchronisation, traffic scheduling and…
More in Electronics, Embedded Systems & Telecom
All Electronics, Embedded Systems & Telecom programmes → · How to apply · Fees & financing · Scholarships