Master’s in Class-A Surfacing and Advanced Parametric Modelling
Online master's programme of 1,900 hours in Class-A surfacing and advanced parametric modelling: Alias/CATIA, G3/G4 continuity, design freeze and optical quality. 12 modules covering NURBS geometry, surface quality, Alias, ICEM Surf and CATIA, parametric design, feasibility, reverse engineering and design visualisation, with an assigned technical tutor.
Master’s in Class-A Surfacing and Advanced Parametric Modelling — studying from Australia
Product design and human-machine interface work is important across Australian industries, from consumer goods and medical devices to mining equipment and transport systems. Designers and engineers collaborate on usability, ergonomics and visual interfaces, with growing attention to accessibility standards and user research. Australia has active design communities in Sydney, Melbourne and Brisbane, supported by universities and design agencies. Employers include manufacturers, software companies, consultancies and in-house product teams in large organisations.
Fees for Australia: A$12,600 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification count for professional design recognition in Australia?
Australian design practice is recognised through bodies such as the Design Institute of Australia, which runs professional membership, and Engineers Australia covers engineering-related design. SEIUM's private qualifications are not accredited by these bodies. Employers and the relevant body decide whether it counts toward recognition.
Which Australian employers need HMI and product design skills?
Australia has product design studios, software companies, automotive and medical device firms, and consultancies needing interface and product designers. Employers usually look closely at your portfolio and user research work. A SEIUM qualification may complement this, but its weight is determined by each employer.
Can I study this part-time from Australia and what language level is needed?
Yes, the courses are 100% online, so you can study from home across Australia without a student visa. Teaching is in English, so you need solid English proficiency. Durations range from 300 to 1,900 hours, with an assigned technical tutor, instalment payments, and possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand NURBS geometry and surface quality.
Model Class-A surfaces with curvature continuity.
Master modelling tools such as Alias, ICEM Surf and CATIA.
Apply parametric and algorithmic modelling to design components.
Integrate manufacturing requirements into design surfaces.
Reconstruct surfaces from scans of physical models.
Manage surface data deliveries in industrial environments.
Who it's for
- Class-A digital modellers aiming to reach OEM-level quality.
- Surface designers.
- Design feasibility engineers.
- Parametric modelling specialists.
- Vehicle interior designers.
- 3D visualisation technicians.
- Engineering or science graduates aiming to enter the automotive industry.
What you'll work with
- VDA 4955 (CAD/CAM data quality)
- ISO 10303 (STEP product data exchange)
- ISO 14306 (JT visualisation format)
- ISO 1101 (geometrical tolerancing)
- UN Regulation No. 26 (external projections)
- UN Regulation No. 21 (interior fittings)
- Autodesk Alias
- ICEM Surf
- CATIA V5
- Autodesk VRED
- Rhinoceros with Grasshopper
12 modules
1.1The vehicle design process1.2From sketch to digital model1.3What a Class-A surface is1.4Class A, B and C surfaces1.5Visual perception of reflections1.6Brand form language1.7The relationship between design and engineering1.8Industry tools1.9Roles of the digital modeller1.10Case study: surface analysis of a current vehicle
2.1Bézier and B-spline curves2.2NURBS: weights and knots2.3Degree and number of control points2.4Curvature and the curvature comb2.5Single-patch and multi-patch surfaces2.6Surfaces of revolution and sweeps2.7Parameterisation and isoparametric flow2.8Trimmed surfaces2.9Modelling tolerances2.10Lab: building clean curves in Alias
3.1G0, G1, G2 and G3 continuity3.2Zebra and reflection analysis3.3Gaussian curvature maps3.4Highlight lines3.5Defect diagnosis3.6Transitions and variable radii3.7Curvature-continuous blends3.8OEM acceptance criteria3.9Review in virtual reality3.10Practical exercise: correcting a faulty transition
4.1Interface and workflow4.2Modelling character lines4.3Primary surfaces4.4Secondary and transition surfaces4.5Shut lines and openings4.6Symmetry and layers4.7Evaluation tools4.8Scan data from clay models4.9Export to engineering4.10Lab: bonnet and wing in Alias
5.1ICEM Surf for Class-A5.2Direct control point modelling5.3CATIA ICEM Shape Design5.4Imagine and Shape in CATIA5.5Generative Shape Design5.6Data exchange between platforms5.7Tool comparison5.8Quality for tooling manufacture5.9Version management5.10Practical exercise: refining a bumper in ICEM Surf
6.1Parametric versus explicit design6.2Feature tree and robustness6.3Parametric surfaces in CATIA V56.4Engineering templates and UDFs6.5Knowledgeware and rules6.6Variants and families6.7Grasshopper and algorithmic design6.8Generative design6.9Updating after design changes6.10Lab: parametric grille template
7.1Instrument panel and console7.2Door panels7.3Textured and grained surfaces7.4Draft angles7.5Gaps and flush7.6Haptic contact surfaces7.7Integration of displays and bezels7.8Integrated ambient lighting7.9Windscreen reflection requirements7.10Practical exercise: door panel with injection moulding requirements
8.1Sheet metal stamping and deep drawing8.2Radius and depth constraints8.3Injection-moulded plastics and sink marks8.4Joints, gaps and flush8.5Paint requirements8.6Aerodynamics and surfaces8.7Headlamps and tail lamps in the surface8.8Feasibility reviews with engineering8.9Managing the aesthetic–technical compromise8.10Case study: feasibility review of a body side
9.13D scanning of clay models9.2Point cloud processing9.3Surface reconstruction9.4Nominal–actual comparison9.5CNC milling of models9.6Physical–digital iteration9.7Presentation models9.8Photogrammetry9.9Dimensional control9.10Lab: reconstruction from a scan
10.1Real-time rendering with VRED10.2Materials and HDRI environments10.3Virtual reality in reviews10.4Powerwalls and collaborative reviews10.5Presentation animations10.6Comparison of variants10.7Design feedback and logging10.8Visualisation for management10.9Data preparation10.10Practical exercise: VR review of a Class-A model
11.1PLM and surface model management11.2Naming conventions11.3Deliverables by phase11.4Data quality according to VDA 495511.5STEP and JT exchange11.6Working with suppliers11.7Planning freeze milestones11.8Productivity metrics11.9The modeller's professional portfolio11.10Workshop: data delivery to a tooling supplier
12.1Briefing and design concept12.2Character lines12.3Primary surfaces12.4Transitions and details12.5Quality evaluation12.6Feasibility review12.7Visualisation of the result12.8Data delivery package12.9Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine the programme with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Autodesk Alias, ICEM Surf, CATIA V5, Autodesk VRED and Rhinoceros with Grasshopper, in free, academic or evaluation versions. Testing is studied on real procedures for reflection and continuity evaluation, feasibility reviews with engineering and comparison of scans with the nominal model. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: VDA 4955, ISO 10303 (STEP), ISO 14306 (JT), ISO 1101, UN Regulation No. 26, UN Regulation No. 21.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Autodesk Alias, ICEM Surf, CATIA V5, Autodesk VRED and Rhinoceros with Grasshopper, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent demonstrable professional experience), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Motorcycle Design Engineering: Identity and Ergonomics
Online master's programme of 1,900 hours in motorcycle design engineering, identity and ergonomics. 12 modules covering brand identity, rider ergonomics, geometry and dynamics, chassis, fairings and…
Master’s in DesignOps Engineering for Product Teams
Online master's programme of 1,900 hours in DesignOps engineering for product teams: 12 modules covering design team structure, design systems, design processes, tooling, ResearchOps, design metrics…
Master’s in Interior Lighting and Wellbeing Engineering
Online master's programme of 1,900 hours in interior lighting and wellbeing engineering, structured in 12 modules covering light and human health, daylight, interior lighting strategies, workplaces,…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships