Master'sMotorcycles & 2-Wheelers Applications open

Master’s in Charging Cybersecurity and PKI

Online master's programme of 1,900 hours in EV charging cybersecurity and PKI. 12 modules covering threat modelling, applied cryptography, public key infrastructure, ISO 15118 Plug & Charge, OCPP security, charger hardware and backend security, European regulation, penetration testing and secure operations, with an assigned technical tutor.

Duration12–14 months

ModeOnline

LanguageEnglish

Start datesSet by the faculty

AwardSEIUM Institute diploma

Enrol now View syllabus Ask an advisor

Master’s in Charging Cybersecurity and PKI — studying from Australia

Motorcycles and two-wheeled vehicles are a significant part of Australian transport and recreation, with strong demand for motorcycles, scooters and e-bikes in urban and regional areas. Engineers working in this field contribute to chassis and powertrain design, rider safety systems and emissions compliance. National vehicle standards and rider safety initiatives shape product development and testing. Employers include motorcycle importers and distributors, component suppliers, accessory makers and e-mobility start-ups.

Fees for Australia: A$9,410 (AUD), with instalments and employer sponsorship available.

Relevant bodies in Australia

Federal Chamber of Automotive Industries (FCAI)
Australian Motorcycle Industry Association
Standards Australia
Department of Infrastructure, Transport, Regional Development, Communications and the Arts

Typical roles

Motorcycle Design Engineer
Two-Wheeler Test Engineer
Rider Safety Engineer
E-Mobility Product Engineer

Questions from Australia

Will a SEIUM qualification be recognised for motorcycle engineering roles in Australia?

SEIUM qualifications are private and not accredited by any Australian national body. Recognition for engineering or vehicle compliance roles is decided by individual employers and relevant bodies. Vehicle safety and compliance in Australia are governed by national design rules, which apply regardless of your qualification, so check requirements with the employer.

Which Australian employers work in motorcycle and two-wheeler engineering?

Motorcycle and scooter importers, distributors, component suppliers, dealer service networks and performance workshops are examples of Australian employers in this field. Whether they value a private qualification depends on their policies. Practical experience and a strong final project portfolio are typically persuasive in this industry.

Is the course suitable for someone working full time in Australia?

The programmes are delivered 100% online in English with an assigned technical tutor, so you can study from home at times that suit you. Fees are payable in instalments, and employers may sponsor you. Check the hours required for your chosen programme and make sure your schedule allows steady progress.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●

Learning outcomes

What you will be able to do

Identify the threats to the electric vehicle charging ecosystem.

Apply cryptography and TLS to charging communications.

Design and operate public key infrastructures.

Implement Plug & Charge in accordance with ISO 15118.

Secure chargers, OCPP protocols and backends.

Comply with European cybersecurity regulation.

Carry out penetration tests and manage incidents.

Profile

Who it's for

Charging cybersecurity engineers at operators and charger manufacturers.
PKI specialists moving into the V2G and Plug & Charge ecosystem.
Embedded systems pentesters targeting chargers and their protocols.
Cloud security architects responsible for CPMS backends.
Compliance managers preparing for NIS2, the CRA and IEC 62443.
SOC analysts monitoring charging networks.
Engineering or science graduates seeking to work with charge point operators.

Standards & tools

What you'll work with

ISO 15118-20 (vehicle-to-grid communication, Plug & Charge and PKI)
IEC 62443-4-2 (technical security requirements for industrial automation components)
OCPP 2.0.1 (Open Charge Point Protocol with security profiles)
Directive (EU) 2022/2555 – NIS2 (cybersecurity of essential and important entities)
Regulation (EU) 2024/2847 – CRA (Cyber Resilience Act for products with digital elements)
ISO/IEC 27001 (information security management systems)
UNECE R155 (vehicle cybersecurity management system)
ISO/SAE 21434 (road vehicle cybersecurity engineering)
OpenSSL
EJBCA
Wireshark
Burp Suite
Scapy

Syllabus

12 modules

1.1Attack surface of the charging ecosystem
1.2Actors: vehicle, charger, CPMS and grid
1.3Public incidents involving chargers
1.4Attacks on the power grid through charging
1.5Charging session fraud
1.6User data privacy
1.7STRIDE threat modelling
1.8TARA risk analysis
1.9Attacker motivations
1.10Case study: threat modelling of a charging station

2.1Symmetric cryptography and AES
2.2Asymmetric cryptography: RSA and ECC
2.3Hash functions and digital signatures
2.4Key exchange
2.5TLS 1.2 and 1.3
2.6Random number generation
2.7Secure key storage
2.8Post-quantum cryptography and migration
2.9Performance on embedded systems
2.10Lab: TLS handshake with OpenSSL

3.1X.509 certificate structure
3.2Root and intermediate certificate authorities
3.3Chains of trust
3.4Revocation with CRL and OCSP
3.5Certificate policies
3.6Certificate life cycle
3.7HSMs for root keys
3.8PKI audits
3.9PKI on embedded systems
3.10Practical exercise: deployment of a hierarchical PKI

4.1V2G Root CA roles
4.2Contract certificates
4.3OEM and charger certificates
4.4Plug & Charge and provisioning
4.5Hubject services and other ecosystems
4.6Interoperability between PKIs
4.7Certificate installation and renewal
4.8Revocation management
4.9What is new in ISO 15118-20
4.10Case study: Plug & Charge flow

5.1OCPP security profiles
5.2Basic and certificate-based authentication
5.3TLS between charger and backend
5.4Certificate management in OCPP 2.0.1
5.5Security event logging
5.6Secure firmware updates
5.7Common configuration errors
5.8Protocol security testing
5.9OCPP 2.1 and new capabilities
5.10Lab: secure OCPP connection with certificates

6.1Secure firmware boot
6.2Secure elements and TPM
6.3Protection of debug ports
6.4Physical tamper protection
6.5Supply chain security
6.6Firmware signing
6.7Protection of RFID readers
6.8Hardware testing
6.9Firmware vulnerability management
6.10Practical exercise: secure boot verification

7.1Cloud CPMS architecture
7.2Identity and access management
7.3Network segmentation
7.4API security
7.5Denial-of-service protection
7.6Logging and monitoring
7.7Incident response
7.8Backup and recovery
7.9Compliance with cloud standards
7.10Case study: audit of a backend

8.1NIS2 Directive requirements
8.2Cyber Resilience Act (CRA)
8.3Delegated regulation under the Radio Equipment Directive (RED)
8.4UNECE R155 in the vehicle
8.5IEC 62443 for industrial systems
8.6ISO/IEC 27001 management systems
8.7AFIR Regulation requirements
8.8National cybersecurity frameworks
8.9Product certification
8.10Workshop: regulatory compliance matrix

9.1Testing methodology
9.2Reconnaissance of exposed chargers
9.3Firmware analysis
9.4Protocol fuzzing
9.5Attacks on PLC communication
9.6Testing ISO 15118
9.7Testing OCPP
9.8Reporting and prioritisation
9.9Responsible vulnerability disclosure
9.10Lab: fuzzing OCPP messages

10.1Security operations centre
10.2Intrusion detection
10.3Patch management
10.4Asset inventory
10.5Vulnerability management
10.6Threat intelligence
10.7Incident drills
10.8Cybersecurity indicators
10.9Coordination with CSIRTs
10.10Case study: incident in a charger network

11.1Policies and standards
11.2Corporate risk analysis
11.3Security across the life cycle
11.4Supplier management
11.5Training and awareness
11.6Cyber risk insurance
11.7Incident communication
11.8Internal security audits
11.9Maturity roadmap
11.10Workshop: cybersecurity master plan

12.1Definition of the system under study
12.2Threat analysis
12.3Security requirements
12.4PKI design
12.5Charger and backend measures
12.6Security testing
12.7Operations plan
12.8Compliance assessment
12.9Thesis report
12.10Master's Thesis: defence before a panel

Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme is compatible with full-time work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is OpenSSL, EJBCA, Wireshark, Burp Suite and Scapy, in free, academic or evaluation versions. Practical work is based on real procedures for PKI deployment for Plug & Charge, penetration testing of chargers and backends, and threat analysis of charging stations. Assessment is continuous by module, plus the final Master's Thesis.

Standards covered: ISO 15118-20, IEC 62443-4-2, OCPP 2.0.1, Directive (EU) 2022/2555 (NIS2), Regulation (EU) 2024/2847 (CRA), ISO/IEC 27001, UNECE R155, ISO/SAE 21434.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.

Standards-based learning:guided reading of ISO 15118-20, IEC 62443-4-2, OCPP 2.0.1 and NIS2 applied to real cases, not as a theoretical annex.

Industry software:OpenSSL, EJBCA, Wireshark, Burp Suite and Scapy, in free, academic or evaluation versions.

Master's Thesis with defence:a complete security design for a charging system, from threat analysis and PKI design to testing and compliance assessment, defended before a panel.

Flexible format:100% online, no fixed timetables, compatible with full-time work.

Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Threat modelling

Model the threats to a charging station and its ecosystem using STRIDE and TARA.

PKI design

Deploy a hierarchical PKI and implement the Plug & Charge certificate flow.

Securing charger and backend

Set up secure OCPP connections, secure boot and backend protections.

Penetration testing

Fuzz OCPP messages and test ISO 15118 to find and prioritise vulnerabilities.

Master's Thesis

Integrate threat analysis, PKI, testing and compliance into a complete security project, defended before a panel.

Career opportunities

Where this takes you

Charging Cybersecurity EngineerPKI SpecialistEmbedded Systems PentesterCloud Security ArchitectCompliance ManagerSOC Analyst

Admissions & scholarships

Requirements

University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
Internet connection and a computer capable of running the programme software.
English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships

FAQ

Frequently asked questions

The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with OpenSSL, EJBCA, Wireshark, Burp Suite and Scapy, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.

A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the software and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Keep exploring

Related programmes

See all in Motorcycles & 2-Wheelers

Master'sA$9,410

Master’s in Advanced Injection and Combustion Engineering

Online master's programme of 1,900 hours in advanced injection and combustion engineering. 12 modules covering combustion chemistry, injection systems, mixture formation, SI combustion, diagnostics, engine CFD,…

1900 hOnlineMotorcycles & 2-Wheelers

Master'sA$9,410

Master’s in UX for Motorcycle Wearables Engineering

Online master's programme of 1,900 hours in UX engineering for motorcycle wearables, structured in 12 modules covering user research, interaction while riding, voice, audio, haptic and…

1900 hOnlineMotorcycles & 2-Wheelers

Master'sA$12,600

Master’s in Racing Suspension Preparation Engineering

Online master's programme of 1,900 hours in racing suspension preparation engineering, with 12 modules covering racing suspension, the suspension workshop, fork and shock overhaul, revalving, springs…

1900 hOnlineMotorcycles & 2-Wheelers

Master’s in Charging Cybersecurity and PKIEnrol

Related programmes

More in Motorcycles & 2-Wheelers

Master’s in Field Battery Diagnostics and Data AnalyticsView programme →Master’s in Transmissions and Clutches EngineeringView programme →Master’s in Lightweight Structures and Materials EngineeringView programme →Master’s in Helmet Design and Certification EngineeringView programme →Master’s in Motorcycle Aerodynamics and Stability EngineeringView programme →Master’s in EV/EVSE Certification and TestingView programme →

All Motorcycles & 2-Wheelers programmes → · How to apply · Fees & financing · Scholarships