Master’s in Advanced Materials for Ballistic Protection
Online master's programme of 1,900 hours in advanced materials for ballistic protection, with 12 modules covering impact mechanics, dynamic material behaviour, metals, ceramics, fibres and composites, personal and vehicle protection, impact simulation and ballistic testing, applying NIJ Standard 0101.06, STANAG 4569 and STANAG 2920, with an assigned technical tutor.
Master’s in Advanced Materials for Ballistic Protection — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$9,410 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the physics of impact and penetration in materials.
Characterise the dynamic behaviour of metals, ceramics and composites.
Select material combinations for personal and platform protection.
Apply NIJ, STANAG and EN testing and classification standards.
Simulate protection configurations with hydrocodes and validate them.
Design and analyse test campaigns using statistical criteria.
Integrate legal, ethical and sustainability requirements into protection projects.
Who it's for
- Protection materials engineers.
- Impact simulation specialists.
- Ballistic test laboratory managers.
- Personal protection design engineers.
- Vehicle armour integration engineers.
- Composite materials researchers moving into protection applications.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- NIJ Standard 0101.06 (ballistic resistance of body armour)
- STANAG 4569 (protection levels for logistic and light armoured vehicles)
- STANAG 2920 (ballistic test method for personal armour)
- NIJ Standard 0101.07 (updated body armour standard)
- MIL-STD-662F (V50 ballistic test for armour)
- MIL-DTL-46100 (high-hardness armour steel plate)
- MIL-DTL-12560 (wrought rolled homogeneous armour steel)
- EN 1063 (security glazing, resistance to bullet attack)
- LS-DYNA
- ANSYS AUTODYN
- Abaqus/Explicit
- MATLAB
- Granta Selector
12 modules
1.1Elastic and plastic waves1.2Acoustic impedance of materials1.3Equations of state and Hugoniot curves1.4Impact velocity regimes1.5Target penetration mechanisms1.6Failure modes: plugging, petalling and fragmentation1.7Energy and momentum transfer1.8Ballistic limit velocity1.9The Lambert-Jonas model1.10Practical exercise: fitting the ballistic limit to test data
2.1Split Hopkinson pressure bar2.2Plate impact tests2.3The Taylor test2.4Johnson-Cook constitutive model2.5Damage and dynamic fracture models2.6Strain-rate sensitivity2.7Adiabatic shear bands2.8Spall failure2.9Parameter calibration2.10Lab: Hopkinson bar test and Johnson-Cook fitting
3.1High-hardness steels to MIL-DTL-461003.2RHA steels to MIL-DTL-125603.35083 and 7039 aluminium alloys3.4Ti-6Al-4V titanium3.5Magnesium alloys3.6Quench and temper heat treatments3.7Welding of armour steels3.8Cracking and brittleness3.9Hardness and toughness3.10Case study: comparison by areal density
4.1Alumina, silicon carbide and boron carbide4.2Ceramic failure mechanisms4.3The interface defeat phenomenon4.4Sintering and hot pressing4.5Confinement and covers4.6JH-2 constitutive model4.7Amorphisation of boron carbide4.8Tiles and joints4.9Relationship between hardness and toughness4.10Workshop: ceramic selection for a plate
5.1Kevlar and Twaron aramids5.2Dyneema and Spectra UHMWPE5.3PBO and S2 glass fibres5.4Woven fabrics and unidirectional sheets5.5Energy absorption mechanisms5.6Thermoplastic and thermoset matrices5.7The Cunniff parameter5.8Delamination and backface deformation5.9Effect of moisture and UV radiation5.10Lab: characterisation of UHMWPE laminates
6.1Soft vests and hard plates6.2NIJ 0101.06 and 0101.07 standards6.3Behind-armour blunt trauma6.4Ergonomics and user load6.5Helmets and their test methods6.6Protection against fragments6.7Stab protection to NIJ 0115.006.8European VPAM standards6.9Certification and lot conformity6.10Case study: assessing a vest to NIJ
7.1Modular add-on armour kits7.2STANAG 4569 protection levels7.3AEP-55 procedures7.4Spaced armour7.5Blast-resistant floors and seats7.6Structural integration7.7Weight and mobility penalty7.8Security glazing7.9EN 1063 and EN 1522 standards7.10Case study: weight optimisation of an armour kit
8.1Laminated glass and polycarbonate8.2Aluminium oxynitride and spinel8.3Synthetic sapphire8.4Shear-thickening fluids8.5Mechanical metamaterials8.6Graphene and nanomaterials8.7High-entropy alloys8.8Nacre-inspired structures8.9Additive manufacturing of armour8.10Lab: comparison of transparent solutions
9.1Hydrocodes and Lagrangian and Eulerian formulations9.2The SPH method9.3LS-DYNA and ANSYS AUTODYN9.4Erosion and contact algorithms9.5Meshing and convergence9.6Validation against tests9.7Optimisation of multilayer configurations9.8Uncertainty analysis9.9Digital twins of armour9.10Practical exercise: simulation of a ceramic-composite plate
10.1Test facilities and safety10.2Velocity measurement with chronographs10.3High-speed cameras10.4V50 methods according to MIL-STD-662F10.5STANAG 2920 procedures10.6Backing material and trauma measurement10.7Probit and logit statistics10.8Flash radiography10.9ISO/IEC 17025 accreditation10.10Case study: statistical analysis of a V50 series
11.1Export controls on defence material11.2Dual-use Regulation (EU) 2021/82111.3Common Position 2008/944/CFSP11.4Protection of security forces and civilians11.5Occupational safety with materials and powders11.6Life cycle and recycling of composites11.7Health risks of fibres and ceramics11.8Professional responsibility of the engineer11.9Ethics of defence research11.10Workshop: regulatory analysis of a project
12.1Choice and scope of the topic12.2State of the art12.3Threat requirements and protection level12.4Selection and combination of materials12.5Modelling and simulation12.6Experimental plan12.7Analysis of results12.8Conclusions and future work12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
Delivered 100% online on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is LS-DYNA, ANSYS AUTODYN, Abaqus/Explicit, MATLAB and Granta Selector, in free, academic or evaluation versions. Case studies are based on real procedures: V50 ballistic limit tests, dynamic characterisation with the Hopkinson bar and certification of personal protection. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: NIJ Standard 0101.06, STANAG 4569, STANAG 2920, NIJ Standard 0101.07, MIL-STD-662F, MIL-DTL-46100, MIL-DTL-12560, EN 1063.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with LS-DYNA, ANSYS AUTODYN, Abaqus/Explicit, MATLAB and Granta Selector, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Land Systems Engineering (Tanks, Armoured Vehicles)
Online master's programme of 1,900 hours in land systems engineering (main battle tanks and armoured vehicles): 12 modules covering the land systems context, applied systems engineering,…
Master’s in Naval & Submarine Engineering
Online master's programme of 1,900 hours in naval and submarine engineering, structured in 12 modules covering naval architecture, hydrodynamics, naval structures, submarine principles, propulsion and energy,…
Master’s in Responsible AI and Trustworthy Autonomy in Defence Engineering
Online master's programme of 1,900 hours in responsible AI and trustworthy autonomy engineering in defence, structured in 12 modules covering autonomy in defence systems, ethics, international…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships