International Standards in Energy Certification Course
300-hour online course in international standards for energy certification. 6 modules covering Directive (EU) 2024/1275 (energy performance of buildings), ISO 52000-1 (energy assessment framework for buildings) and HULC (Herramienta Unificada LIDER-CALENER). Assigned tutor and open enrolment.
International Standards in Energy Certification Course — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$1,020 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Interpret the European and national framework for building energy certification.
Apply the calculation methodology of the ISO 52000 series.
Calculate the energy needs of a building using recognised tools.
Prepare a complete and consistent energy performance certificate.
Propose improvement measures with their estimated energy savings and costs.
Relate certification to energy management systems and voluntary labels.
Review the quality of input data and the traceability of the procedure.
Who it's for
- Building energy certification technician who wants to specialise in International Standards in Energy Certification.
- Energy auditor who wants to specialise in International Standards in Energy Certification.
- Energy efficiency consultant who wants to specialise in International Standards in Energy Certification.
- Energy manager (ISO 50001) who wants to specialise in International Standards in Energy Certification.
- Energy renovation technician who wants to specialise in International Standards in Energy Certification.
- Adviser on building sustainability labels who wants to specialise in International Standards in Energy Certification.
- Engineering or science graduates seeking to enter building and renovation.
What you'll work with
- Directive (EU) 2024/1275 (energy performance of buildings)
- ISO 52000-1 (energy assessment framework for buildings)
- Royal Decree 390/2021 (energy certification procedure)
- ISO 52016-1 (heating and cooling needs)
- ISO 52003-1 (indicators and certificates)
- ISO 50001 (energy management systems)
- EN 16798-1 (indoor environment input parameters)
6 modules · 300 h
1.1Energy balance of a building1.2Demand versus primary energy consumption1.3Renewable and non-renewable primary energy1.4CO2 emissions indicators1.5Climate zones and degree-days1.6Thermal envelope and U-value1.7Linear and point thermal bridges1.8HVAC and domestic hot water systems1.9Concept of nearly zero-energy building1.10Workshop: calculating the U-value of a wall
2.1Directive 2010/31/EU and its recast 2024/12752.2Certificates and A-G rating scales2.3Building renovation passport2.4Directive 2023/1791 on energy efficiency2.5Transposition in Spain: Royal Decree 390/20212.6Spanish Building Code DB-HE2.7Regional certificate registers2.8Periodic inspection of thermal installations (RITE)2.9Penalties and quality control of certificates2.10Case study: comparing ratings between countries
3.1Structure of the EN ISO 52000 family3.2EN ISO 52000-1: general framework and modules3.3EN ISO 52016-1: hourly load calculation3.4EN ISO 52010-1: external climate data3.5EN ISO 13790 and its transition to 520163.6EN ISO 6946 and 10211 for the building envelope3.7EN 15316 for heating systems3.8Primary energy conversion factors3.9National annexes and calculation options3.10Practice: monthly versus hourly calculation
4.1Recognised procedures: HULC, CE3X, CYPETHERM4.2Data collection during an inspection visit4.3Existing buildings and default values4.4Geometric modelling and orientation4.5Definition of systems and installations4.6Improvement measures and their recommendation4.7Sensitivity analysis of the result4.8Common errors in certificates4.9External control and quality audits4.10Laboratory: certifying a dwelling with CE3X
5.1ISO 50001: energy management systems5.2ISO 50006: baselines and indicators5.3ISO 50015: measurement and verification5.4IPMVP protocol for savings5.5EN 16247: energy audits5.6LEED certification and energy credits5.7BREEAM and VERDE in the European context5.8Passivhaus and EnerPHit standard5.9Defence sector installations and efficiency5.10Case study: EN 16247 audit of a commercial building
6.1Selection of the study building6.2Gathering plans and installation data6.3Modelling the envelope and systems6.4Calculating the initial rating6.5Proposing improvement measures6.6Economic evaluation and payback period6.7Rating after renovation6.8Preparing the certificate and report6.9Written report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and a assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is HULC (Herramienta Unificada LIDER-CALENER), CE3X, CYPETHERM HE Plus, DesignBuilder, EnergyPlus, in free, academic or evaluation versions. Tests are studied using real procedures for data collection visits in existing buildings, energy audits of buildings, and review of certificates in regional registers. Assessment is continuous by module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Interpret the European and national framework for building energy certification.
Apply the calculation methodology of the ISO 52000 series.
Calculate the energy needs of a building using recognised tools.
Prepare a complete and consistent energy performance certificate.
Propose improvement measures with their estimated energy savings and costs.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme is 300 total hours spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
You will work with HULC (Herramienta Unificada LIDER-CALENER), CE3X, CYPETHERM HE Plus, DesignBuilder, EnergyPlus. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Check the credit transfer policy when you enrol.
Related programmes
DO-178C Aeronautical Software Certification Course Applied to UAS
Online 300-hour course in DO-178C aeronautical software certification applied to UAS. 6 modules covering DO-178C / ED-12C (software in airborne systems), Delegated Regulation (EU) 2019/945 (unmanned…
Course in Ethics in Artificial Intelligence in Flight Systems
Online 300 h course in ethics in artificial intelligence in flight systems. 6 modules covering DO-178C (software in airborne systems), ARP4754B (development of aircraft and systems)…
Course in Fundamentals of Ballistic Armour and STANAG Standards
Online 300-hour course in fundamentals of ballistic armour and STANAG standards. 6 modules covering STANAG 4569 / AEP-55 (vehicle protection levels), STANAG 2920 (V50 test method)…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships