Hydrodynamic Simulation in Racing Yachts Course
Online 300 h course in hydrodynamic simulation for racing yachts. 6 modules covering World Sailing Equipment Rules of Sailing, ORC International Rule (Offshore Racing Congress) and Simcenter STAR-CCM+. Assigned tutor and open enrolment.
Hydrodynamic Simulation in Racing Yachts Course — studying from Australia
Australia's maritime sector is substantial, encompassing naval shipbuilding, offshore oil and gas, port operations and recreational boating. The Royal Australian Navy's shipbuilding programmes, including the Hunter class frigates and Henderson Defence Precinct in Western Australia, generate significant engineering demand. Offshore energy developments on the North West Shelf and in Bass Strait require marine and structural expertise. Recreational boating is widespread, supported by a strong sports nautical industry. Employers include naval shipbuilders, offshore operators, port authorities and marine equipment manufacturers.
Fees for Australia: A$1,180 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this training recognised by Australian maritime regulators such as AMSA?
SEIUM qualifications are private and are not official state degrees or accredited by national bodies. The Australian Maritime Safety Authority regulates maritime certificates and qualifications separately, and SEIUM training does not replace those requirements. Confirm with AMSA or your employer which credentials your intended role requires.
Which Australian employers might consider this qualification for naval or offshore work?
Offshore energy operators, shipbuilders, naval contractors, marine consultancies and sports nautical manufacturers are examples of Australian employers in this area. Their hiring decisions depend on their own criteria and on any required certifications. A private qualification is one factor among experience and licensing.
Can I study this part time from Australia, and can employers help pay?
Yes, the programmes are fully online and taught in English, so you can study from Australia without a student visa and fit learning around your schedule. Fees are payable in instalments, and employer sponsorship is possible. Confirm the total hours and expected pace before committing.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the hydrodynamics and aerodynamics of racing yachts.
Build speed predictions using VPP.
Simulate heeled hulls and appendages using CFD.
Analyse the aerodynamic behaviour of sails and rigs.
Evaluate the dynamics of foiling yachts.
Interpret telemetry data to improve performance.
Develop a hydrodynamic study of a racing yacht.
Who it's for
- Racing yacht designer wishing to specialise in hydrodynamic simulation in racing yachts.
- Sailing hydrodynamics engineer wishing to specialise in hydrodynamic simulation in racing yachts.
- CFD engineer wishing to specialise in hydrodynamic simulation in racing yachts.
- Performance analyst for racing teams wishing to specialise in hydrodynamic simulation in racing yachts.
- Rating measurer wishing to specialise in hydrodynamic simulation in racing yachts.
- Appendage and foil engineer wishing to specialise in hydrodynamic simulation in racing yachts.
- Graduates in engineering or science seeking to join racing teams.
What you'll work with
- World Sailing Equipment Rules of Sailing
- ORC International Rule (Offshore Racing Congress)
- ISO 12217-2 Stability and buoyancy of sailing boats
- ISO 12215-9 Appendages of sailing boats
- World Sailing Offshore Special Regulations
- Directive 2013/53/EU on recreational craft
- ITTC 7.5-03-02-03 Practical Guidelines for Ship CFD Applications
6 modules · 300 h
1.1Balance of aerodynamic and hydrodynamic forces1.2Hull resistance when heeled and leeway1.3Keel and rudder lift1.4Induced resistance and aspect ratio1.5Keel bulbs and winglets1.6Racing classes: IMCA, TP52, IMOCA and AC1.7Canting keels and asymmetric daggerboards1.8Effect of trim and crew1.9Wetted surface and roughness1.10Practical case: forces on an IMOCA close-hauled
2.1Structure of a speed prediction programme2.2Delft series resistance models (DSYHS)2.3Rig aerodynamic models2.4Balance of forces and moments2.5Speed polars and optimal angles2.6Rating systems: ORC and IRC2.7Sensitivity to design parameters2.8Dynamic VPPs and manoeuvres2.9Validation with sailing data2.10Practice: speed polar of a racing cruiser
3.1Heeled hull with free surface3.2Simulation of keel and rudder in leeway3.3Interaction between appendages3.4Optimisation of keel bulbs3.5Resistance calculation in waves3.6Wake analysis and rudder ventilation3.7Overset meshes for drift angle3.8Validation with sailing yacht tank tests3.9Computational cost in design campaigns3.10Laboratory: resistance of a heeled hull
4.1Aerofoil theory applied to sails4.2Genoa–mainsail interaction and slot effect4.3Rigid sails and wings on catamarans4.4Fluid–structure interaction in sails4.5CFD modelling of sails in apparent wind4.6Wind gradient and twist4.7Sail wind tunnel tests4.8Spinnaker forces on downwind legs4.9Sail trim optimisation4.10Practical case: rig coefficients close-hauled
5.1Foiling yachts: AC75 and IMOCA5.2Stability in flight and height control5.3Cavitation and foil ventilation5.4Sailing simulators with crew5.5Tacking and gybing dynamics5.6Yacht behaviour in waves5.7Telemetry and racing data analysis5.8Course optimisation with weather forecasting5.9Class rules and design constraints5.10Workshop: telemetry analysis of a race
6.1Class selection and design rules6.2Definition of shapes and appendages6.3CFD simulation of hull and appendages6.4Rig aerodynamic model6.5Building the VPP and polars6.6Design sensitivity analysis6.7Comparison with a reference design6.8Recommendations for the racing campaign6.9Report and presentation6.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Simcenter STAR-CCM+, WinDesign VPP, Rhinoceros 3D, OpenFOAM, Expedition, in free, academic or evaluation versions. Practical work is based on real procedures for CFD simulation of heeled hulls with appendages, calculation of speed polars with VPP, and racing telemetry analysis. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the hydrodynamics and aerodynamics of racing yachts.
Build speed predictions using VPP.
Simulate heeled hulls and appendages using CFD.
Analyse the aerodynamic behaviour of sails and rigs.
Evaluate the dynamics of foiling yachts.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with full-time work.
You work with Simcenter STAR-CCM+, WinDesign VPP, Rhinoceros 3D, OpenFOAM, Expedition. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are recognised in the advanced programme. Check the recognition policy when you enrol.
Related programmes
Static and Dynamic Ship Stability Course
Online 300-hour course in static and dynamic ship stability. 6 modules covering the International Code on Intact Stability 2008 (IS Code 2008), SOLAS Convention, Chapter II-1…
Offshore Racing Course: Logistics and Crew
300-hour online course in offshore racing: logistics and crew. 6 modules covering World Sailing Offshore Special Regulations, World Sailing Racing Rules of Sailing and Expedition. Assigned…
Offshore Dynamics Simulation in Extreme Waves Course
Online 300-hour course in offshore dynamics simulation in extreme waves. 6 modules covering DNV-RP-C205 Environmental conditions and loads, ISO 19901-1 Metocean design and operating conditions and…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships