Fusion Plasma Diagnostics Course
Online 300-hour course in fusion plasma diagnostics. 6 modules covering the ITER Plant Control Design Handbook (PCDH), IEC 60825-1 (laser product safety) and IMAS (ITER). Assigned tutor and open enrolment.
Fusion Plasma Diagnostics Course — studying from Australia
Australia does not operate nuclear power plants, but nuclear science and technology play important roles in research, medicine, mining and regulation. The Australian Nuclear Science and Technology Organisation operates research reactors and produces radiopharmaceuticals, while uranium mining is conducted in South Australia, the Northern Territory and Queensland. Nuclear engineering skills support regulatory oversight, radiation safety and decommissioning activities. Employers include ANSTO, the Australian Radiation Protection and Nuclear Safety Agency, mining companies and specialist consultancies.
Fees for Australia: A$1,020 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does this programme meet Australian nuclear licensing or regulatory requirements?
No. SEIUM qualifications are private and are not accredited by any national body. Nuclear activities in Australia are regulated by the Australian Radiation Protection and Nuclear Safety Agency and related authorities, which set their own competency requirements. Check directly with the regulator and your employer about any qualifications needed for a specific role.
Which Australian organisations might consider this training for nuclear-related roles?
Australian employers in this area include research organisations, radiation protection services, mining and resources companies, and consultancies working on nuclear-related projects. Hiring depends on each organisation's requirements and on security and licensing needs. A private qualification is unlikely to be sufficient alone, so combine it with relevant experience.
Is the programme workable alongside a job, and how is it funded?
The programmes are delivered entirely online in English with an assigned technical tutor, allowing study from Australia around work commitments. Fees can be paid in instalments, and employer sponsorship is possible. Review the programme length, from 300 to 1,900 hours, and plan carefully.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the plasma parameters that need to be measured.
Explain magnetic and microwave diagnostics.
Describe optical and spectroscopic diagnostics.
Analyse nuclear and particle diagnostics.
Evaluate the integration challenges of diagnostics in ITER.
Interpret experimental data to reconstruct the state of the plasma.
Design a diagnostic system for a measurement objective.
Who it's for
- Plasma diagnostics engineer who wants to specialise in Diagnostics in Fusion Plasmas.
- Experimental fusion physicist who wants to specialise in Diagnostics in Fusion Plasmas.
- Spectroscopy specialist who wants to specialise in Diagnostics in Fusion Plasmas.
- Fusion instrumentation engineer who wants to specialise in Diagnostics in Fusion Plasmas.
- Plasma data analyst who wants to specialise in Diagnostics in Fusion Plasmas.
- ITER integration engineer who wants to specialise in Diagnostics in Fusion Plasmas.
- Graduates in engineering or science seeking to join fusion research centres.
What you'll work with
- ITER Plant Control Design Handbook (PCDH)
- IEC 60825-1 (Laser Product Safety)
- Directive 2013/59/Euratom (Basic Safety Standards)
- IEC 61508 (Functional Safety)
- Décret No. 2012-1248 (INB 174)
6 modules · 300 h
1.1Electron and ion temperature1.2Electron density and profiles1.3Magnetic field and current1.4Toroidal and poloidal rotation1.5Impurity content and Zeff1.6Radiative losses1.7Neutrons as a reaction indicator1.8Fluctuations and turbulence1.9Spatial and temporal resolution requirements1.10Workshop: measurement matrix for a tokamak
2.1Mirnov coils and mode analysis2.2Diamagnetic loops and stored energy2.3Microwave reflectometry2.4Electron cyclotron emission (ECE)2.5Infrared interferometry2.6Faraday polarimetry2.7Collective Thomson scattering2.8ECE radiometer calibration2.9Profile inversion2.10Laboratory: spectral analysis of MHD modes
3.1Incoherent Thomson scattering3.2Charge exchange recombination spectroscopy (CXRS)3.3Visible and ultraviolet spectroscopy3.4Soft X-ray spectroscopy3.5Beam emission spectroscopy (BES)3.6Stark effect polarimetry (MSE)3.7Fast cameras and tomography3.8Infrared thermography of surfaces3.9Abel inversion3.10Practice: temperature calculation with Thomson scattering
4.1Neutron spectrometry4.2Neutron cameras and emission profiles4.3Foil activation4.4Gamma-ray detectors4.5Fast alpha particles and their confinement4.6Neutral particle analysers4.7Langmuir probes at the edge4.8Bolometry and power balance4.9Diagnostics for tritium in DT4.10Case study: neutron diagnostics at JET DTE2
5.1ITER diagnostics plan5.2Neutron damage to windows and mirrors5.3Deposition on first-wall mirrors5.4Diagnostic ports and shielding5.5Diagnostics for real-time control5.6Integrated Bayesian analysis (IDA)5.7Data management with IMAS5.8Cross-validation between diagnostics5.9Diagnostics for DEMO5.10Case study: design of an ITER diagnostic port
6.1Definition of the target parameter6.2Selection of technique6.3Optical or electronic sizing6.4Signal and noise analysis6.5Integration into the machine6.6Calibration plan6.7Data processing and inversion6.8Uncertainty estimation6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: learners progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is IMAS (ITER), OMFIT, Raysect/Cherab, MATLAB, Python (SciPy), in free, academic or evaluation versions. Tests are studied using real procedures for Thomson scattering, interferometry and microwave reflectometry, and plasma emission spectroscopy. Assessment is continuous per module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the plasma parameters that must be measured.
Explain magnetic and microwave diagnostics.
Describe optical and spectroscopic diagnostics.
Analyse nuclear and particle diagnostics.
Evaluate the integration challenges of diagnostics in ITER.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow the reading of technical regulations.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 total hours spread over 3 to 5 months. That is between 10 and 15 hours a week on average, compatible with full-time work.
You work with IMAS (ITER), OMFIT, Raysect/Cherab, MATLAB, Python (SciPy). Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM Institute upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a Course or Postgraduate Diploma in the same area are credited towards the higher programme. Check the credit transfer policy when you enrol.
Related programmes
Breeding Blankets and Tritium Production Course
Online 300-hour course in breeding blankets and tritium production. 6 modules covering Décret n° 2012-1248 (authorisation for the creation of ITER, INB 174), Arrêté INB du…
Course in Ethics in Nuclear Cycle Management
Online course of 300 h in ethics in nuclear cycle management. 6 modules covering IAEA SF-1 (Fundamental Safety Principles), the Euratom Treaty (1957) and NVivo. Personal…
Course on Remote Manipulators in Hot Cells
Online course of 300 h in Remote Manipulators in Hot Cells. 6 modules covering ISO 17874 (remote handling devices for radioactive materials), ISO 10648 (containment enclosures)…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships