Diploma in Wood-Metal Joints and Adhesives
Online postgraduate diploma of 800 hours in wood-metal joints and adhesives: 8 modules covering wooden vehicle structures, material properties, mechanical and adhesive joints, hybrid joint design, fabrication, repair, protection and finishing, with an assigned technical tutor.
Diploma in Wood-Metal Joints and Adhesives — studying from Australia
Restoration of classic vehicles and heritage machinery is a valued pursuit in Australia, supported by active car clubs, museums and a dedicated enthusiast community. Engineers and skilled restorers work on historical preservation, parts sourcing, engine rebuilding and compliance with vehicle registration requirements. The heritage and collectable vehicle market supports specialist workshops, parts suppliers and appraisal services. Employers include restoration workshops, museums, specialist importers and heritage organisations.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this training recognised by any Australian heritage or automotive restoration body?
SEIUM qualifications are private and not accredited by any Australian national body or heritage authority. Recognition is decided by employers and individual clients. Heritage listings and vehicle registration are governed by state authorities, so check their requirements separately if they affect your work.
Which Australian businesses might employ restoration specialists with this training?
Classic car restoration workshops, heritage vehicle dealers, museums, and specialist parts suppliers are examples of Australian employers and clients in this area. Hiring decisions rest with each business. A strong restoration portfolio and practical experience are typically more persuasive than a private qualification.
Can I study from Australia while keeping my current work, and can it be funded?
Yes, the programmes are fully online and taught in English, so you can study from Australia without a student visa and around your existing work. Fees are payable in instalments, and employer sponsorship is possible. Check the total hours and build a schedule you can sustain.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand wooden structures in historic vehicles.
Analyse the compatibility between wood and metal.
Design suitable mechanical joints.
Produce durable wood-metal adhesive joints.
Design hybrid joints using engineering criteria.
Fabricate and repair structural timber components.
Protect and maintain joints in service.
Who it's for
- Wooden coachbuilders
- Classic vehicle restorers
- Structural cabinetmakers
- Adhesive bonding technicians
- Classic boat restorers
- Industrial heritage conservation technicians
- Engineering or science graduates looking to move into classic vehicle restoration
What you'll work with
- EN 204 (classification of thermoplastic wood adhesives for non-structural applications)
- ISO 4587 (lap-shear strength of rigid-to-rigid bonded assemblies)
- EN 205 (determination of tensile shear strength of lap joints in wood adhesives)
- EN 350 (durability of wood and wood-based products)
- ISO 10365 (designation of main failure patterns in adhesive joints)
- FIVA Turin Charter (principles for the preservation of historic vehicles)
- SolidWorks
- Ansys Mechanical
- Fusion 360
- VCarve Pro
8 modules
1.1Ash frames in coachwork1.2Woodie vehicles and wooden coachbuilt bodies1.3Vans and service vehicles with timber1.4Floors and load beds1.5Sheet metal joined to a wooden frame1.6Timber species and their behaviour1.7History of composite construction1.8Common defects1.9Conservation criteria1.10Workshop: analysis of a body frame
2.1Anisotropy and shrinkage of wood2.2Moisture content and equilibrium2.3Density and mechanical strength2.4Natural durability2.5Properties of steels and aluminium2.6Differential thermal expansion2.7Corrosion of metals in contact with wood2.8Tannins and attack on steel2.9Chemical compatibility2.10Practical: measuring moisture in ash components
3.1Wood screws3.2Through bolts and recessed nuts3.3Rivets in composite joints3.4Threaded inserts3.5Metal plates and brackets3.6Reinforced traditional joinery joints3.7Preloading and loosening3.8Protection of holes3.9Load distribution3.10Case study: design of a bolted joint in a door pillar
4.1Epoxy adhesives for wood and metal4.2Structural polyurethanes4.3Adhesives classified D1 to D4 according to EN 2044.4Wood preparation4.5Metal preparation and primers4.6Bondline thickness and gap filling4.7Curing and temperature4.8Durability against moisture4.9ISO 4587 shear test4.10Laboratory: wood-aluminium joint specimens
5.1Loads on bodies and chassis5.2Stress concentrations5.3Hybrid bolted and bonded joints5.4Expansion joints5.5Corrosion barriers5.6Drainage and ventilation5.7Finite element modelling5.8Safety factors5.9Design documentation5.10Practical: finite element analysis of a joint
6.1Timber selection and drying6.2Templates and copying of parts6.3Steam bending and laminating6.4CNC machining6.5Grafts and partial repairs6.6Consolidation of degraded wood6.7Replacement of metal parts6.8Assembly on the chassis6.9Dimensional inspection6.10Workshop: reproduction of an ash pillar
7.1Fungicidal and insecticidal treatments7.2End-grain sealers7.3Metal primers7.4Marine varnishes7.5Period paints7.6Seals and fillers7.7Periodic maintenance7.8Inspection of joints in service7.9Reversibility criteria7.10Case study: maintenance plan for a woodie body
8.1Selection of the part or assembly8.2Diagnosis of the structure8.3Load analysis8.4Joint design8.5Selection of adhesives and fasteners8.6Validation tests8.7Fabrication and assembly8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SolidWorks, Ansys Mechanical, Fusion 360 and VCarve Pro, in free, academic or evaluation versions. Testing is studied through real procedures for shear testing of wood-metal joints, reproduction of ash body frames and corrosion diagnosis in composite joints. Assessment is continuous by module, plus the final integrated project.
Standards covered: EN 204, ISO 4587, EN 205, EN 350, ISO 10365, FIVA Turin Charter.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SolidWorks, Ansys Mechanical, Fusion 360 and VCarve Pro, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Power Optimisation on Low-Grip Surfaces
Online postgraduate diploma of 800 hours in Power Optimisation on Low-Grip Surfaces. 8 modules covering low-grip traction, engine torque delivery, transmission and differentials, traction control, chassis…
Diploma in Fuel Strategy and Range in Desert Rallies
Online postgraduate diploma of 800 hours in fuel strategy and range management in desert rallies, with 8 modules covering rally-raid consumption, fuel systems, range regulations, stage…
Diploma in Tyre Engineering for Sand and Rock
Online postgraduate diploma of 800 hours in tyre engineering for sand and rock: 8 modules covering off-road tyre construction, compounds, tread design, behaviour on sand and…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships