Diploma in Validation of Lighting Comfort and Visual Ergonomics
Online postgraduate diploma of 800 hours in lighting comfort validation and visual ergonomics: 8 modules covering visual ergonomics, lighting comfort, displays and legibility, measurement methods, subjective evaluation, validation in vehicle development and safety and regulations, with an assigned technical tutor.
Diploma in Validation of Lighting Comfort and Visual Ergonomics — studying from Australia
Product design and human-machine interface work is important across Australian industries, from consumer goods and medical devices to mining equipment and transport systems. Designers and engineers collaborate on usability, ergonomics and visual interfaces, with growing attention to accessibility standards and user research. Australia has active design communities in Sydney, Melbourne and Brisbane, supported by universities and design agencies. Employers include manufacturers, software companies, consultancies and in-house product teams in large organisations.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification count for professional design recognition in Australia?
Australian design practice is recognised through bodies such as the Design Institute of Australia, which runs professional membership, and Engineers Australia covers engineering-related design. SEIUM's private qualifications are not accredited by these bodies. Employers and the relevant body decide whether it counts toward recognition.
Which Australian employers need HMI and product design skills?
Australia has product design studios, software companies, automotive and medical device firms, and consultancies needing interface and product designers. Employers usually look closely at your portfolio and user research work. A SEIUM qualification may complement this, but its weight is determined by each employer.
Can I study this part-time from Australia and what language level is needed?
Yes, the courses are 100% online, so you can study from home across Australia without a student visa. Teaching is in English, so you need solid English proficiency. Durations range from 300 to 1,900 hours, with an assigned technical tutor, instalment payments, and possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the factors of human vision that determine lighting comfort.
Quantify glare, contrast and uniformity in a cabin.
Assess the legibility of displays and head-up displays.
Apply photometric instrumentation for objective measurements.
Design subjective evaluations with observers.
Integrate lighting validation into the project quality gates.
Produce validation reports with well-founded improvement proposals.
Who it's for
- Visual ergonomics specialists assessing glare, legibility and fatigue.
- Interior validation engineers responsible for cabin sign-off.
- Photometric laboratory technicians measuring luminance and contrast.
- Display engineers optimising screens and head-up displays.
- Perceived quality engineers evaluating the lit appearance of the cabin.
- Human factors specialists running observer and eye-tracking studies.
- Engineering or science graduates seeking to enter the automotive industry.
What you'll work with
- EN 12464-1 (lighting of indoor workplaces)
- ISO 15008 (in-vehicle visual presentation requirements)
- CIE 117 (discomfort glare in interior lighting)
- SAE J1757-1 (standard metrology for vehicular displays)
- ISO 9241-303 (requirements for electronic visual displays)
- IEC 62471 (photobiological safety of lamps)
- CIE S 026 (metrology for ipRGC-influenced responses to light)
- UNECE R43 (safety glazing materials)
- Ansys Speos
- TechnoTeam LMK LabSoft
- MATLAB
- Tobii Pro Lab
- Minitab
8 modules
1.1The visual system and adaptation1.2Acuity, accommodation and presbyopia1.3Visual field and peripheral vision1.4Visual fatigue and its symptoms1.5Re-accommodation times between distances1.6Night vision and older drivers1.7Individual differences and visual defects1.8Driver posture and line of sight1.9Visual tasks in driving1.10Practical exercise: measuring reading times at different distances
2.1Illuminance, uniformity and luminance balance2.2Discomfort glare and the UGR index according to CIE 1172.3Disability glare2.4Luminance contrast on displays2.5Veiling reflections2.6Colour temperature and preference2.7Flicker and the stroboscopic effect2.8Daylight, panoramic roofs and tinted glazing2.9Lighting comfort according to EN 12464-12.10Lab: measuring luminances in a cabin
3.1Luminance, contrast and ambient contrast ratio3.2Display metrology SAE J1757-13.3Reflectance and anti-reflective treatments3.4Viewing angles and polarisation3.5Adaptive brightness and dimming curves3.6Typography and character size3.7Visual presentation ISO 150083.8Head-up display: virtual image and distance3.9Ergonomic requirements ISO 9241-3033.10Practical exercise: measuring display contrast in sunlight
4.1Luminance meters and luminance cameras4.2Spectroradiometers4.3Measurement of reflections and stray light4.4Solar simulation and test sources4.5Measurement in a real cabin and in a mock-up4.6Luminance simulation with Speos4.7Uncertainty and repeatability4.8Measurement reports4.9Comparison between design variants4.10Lab: luminance map with a camera
5.1Comfort and glare scales5.2Panels of trained observers5.3Paired comparisons5.4Design of perceptual experiments5.5Visual fatigue questionnaires5.6Eye tracking5.7Correlation between objective and subjective measures5.8Statistical analysis5.9Bias and experimental control5.10Practical exercise: glare test with observers
6.1Visual requirements in the specification6.2Virtual reality reviews6.3Static and dynamic clinics6.4Night-time road tests6.5Windscreen reflection tests6.6HUD and cluster validation6.7Perceived quality of lighting6.8Project quality gates6.9Defect management and corrective actions6.10Case study: resolving a windscreen reflection
7.1Photobiological safety IEC 624717.2Non-visual effects according to CIE S 0267.3Visibility and field-of-view requirements7.4Safety glazing UNECE R437.5Controls and tell-tale requirements FMVSS 1017.6Visual distraction and NHTSA guidelines7.7Photosensitivity and flicker7.8Compliance documentation7.9Manufacturer liability7.10Case study: compliance report for an instrument cluster
8.1Definition of scope8.2Visual and lighting requirements8.3Objective measurement plan8.4Subjective evaluation plan8.5Execution of measurements8.6Analysis and correlation8.7Improvement proposals8.8Validation report8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme is compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys Speos, TechnoTeam LMK LabSoft, MATLAB, Tobii Pro Lab and Minitab, in free, academic or evaluation versions. Cases are studied on real procedures for camera-based luminance maps in a real cabin, glare tests with observer panels and night-time road legibility tests. Assessment is continuous by module, plus the final capstone project.
Standards covered: EN 12464-1, ISO 15008, CIE 117, SAE J1757-1, ISO 9241-303, IEC 62471, CIE S 026, UNECE R43.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Ansys Speos, TechnoTeam LMK LabSoft, MATLAB, Tobii Pro Lab and Minitab, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in AR/MR for Driving: Content, Luminance and Regulations
Online postgraduate diploma of 800 hours in AR/MR for Driving: Content, Luminance and Regulations. 8 modules covering AR-HUD technology, AR content design, luminance and visual perception,…
Diploma in Design for Repair/Disassembly and Materials Passport
Online postgraduate diploma of 800 hours in design for repair/disassembly and material passports: 8 modules covering repairability, design for disassembly, vehicle recyclability, batteries under Regulation (EU)…
Diploma in Trim Processes, Joining and Perceived Quality
Online postgraduate diploma of 800 hours in trim processes, joining and perceived quality: 8 modules covering interior trim components, trim manufacturing processes, joining technologies, perceived quality,…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships