Diploma in US NCAP and North American Validation Plans
Online postgraduate diploma of 800 hours in US NCAP and North American validation plans. 8 modules covering fundamentals, regulatory framework, analysis methods, design, systems integration, risk, validation and an integrated case study, with an assigned technical tutor.
Diploma in US NCAP and North American Validation Plans — studying from Australia
Australia no longer manufactures passenger vehicles at scale, but automotive engineering remains significant through component suppliers, design and engineering services, fleet operations and a strong motorsport culture. Engineers contribute to vehicle testing, powertrain development, vehicle dynamics and aftermarket product development. Motorsport activity centres on categories such as Supercars, which draws engineering talent from across the country. Employers include major global suppliers, dealership groups, fleet operators and specialist engineering consultancies working with manufacturers.
Fees for Australia: A$1,740 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Which Australian bodies matter for automotive engineering recognition?
Engineers Australia is the main professional body for engineers and sets the standards for Chartered Professional Engineer status, which generally requires an accredited qualification. Automotive standards in Australia are overseen by bodies such as the Department of Infrastructure and vehicle compliance agencies. SEIUM's private qualifications are not accredited by these bodies, so their value depends on employer assessment.
What automotive careers and employers in Australia could this support?
Australia has automotive suppliers, vehicle engineering firms, motorsport teams and fleet operators, along with a growing mobility sector. Employers typically look at demonstrated technical skills, project work and experience. A SEIUM qualification may support your application, but whether it is recognised is for each employer to decide.
Can I manage this online course alongside a full-time job in Australia?
Yes, the courses are 100% online and taught in English, so you can study around work and from home without a student visa. Specialist courses take 300 hours, postgraduate diplomas 800 hours and master's 1,900 hours. Each student has an assigned technical tutor, and employer-funded training may be possible in some cases.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Master the technical fundamentals of US NCAP and North American Validation Plans and its regulatory vocabulary.
Apply ISO 21500, ISO 56002 (innovation management) and ISO 37001 to real design and validation decisions.
Build and correlate calculation models with Power BI and Tableau.
Plan and run test campaigns in a project office and a business prototyping lab.
Analyse operating data and turn it into engineering decisions.
Prepare the technical and compliance dossier required by the client or regulator.
Lead a US NCAP and North American validation plans project technically from start to finish.
Who it's for
- Technical product managers.
- Programme managers.
- Technology policy analysts.
- R&D managers.
- Technology transfer managers.
- Industrial business developers.
- Engineering or science graduates seeking to move into industry.
What you'll work with
- ISO 21500 (project management guidance)
- ISO 56002 (innovation management)
- ISO 37001 (anti-bribery management systems)
- ISO 14001 (environmental management)
- GRI Standards (sustainability reporting)
- CSRD – Directive (EU) 2022/2464 (corporate sustainability reporting)
- EU Taxonomy (sustainable activities classification)
- Horizon Europe (EU research and innovation programme)
- Spanish Law 14/2011 on Science, Technology and Innovation
- Power BI
- Tableau
- MS Project
- Jira
- Miro
8 modules
1.1Fundamental concepts and quantities of US NCAP and North American Validation Plans1.2Technology landscape and state of the art1.3Technical terminology and reference documentation1.4Physical and engineering principles applied to the case1.5Functional architecture: from requirements to components1.6Interfaces and dependencies with adjacent systems1.7Typical use cases in the sector1.8Common errors and how to detect them early1.9Data sources and quality criteria1.10Guided initial diagnosis exercise
2.1Applicable regulatory framework: overview2.2Regulatory hierarchy and conflicts between standards2.3Mandatory requirements versus good practice2.4Acceptance criteria and required evidence2.5Technical documentation and traceability2.6Change management and configuration control2.7Audits, inspections and non-conformities2.8Responsibilities and division of scope2.9Interpreting critical clauses2.10Exercise: regulatory checklist
3.1Setting up the model: assumptions and simplifications3.2Selecting tools and the working environment3.3Preparing the input data3.4Workflow and modelling good practice3.5Discretisation and case preparation3.6Boundary conditions and load cases3.7Convergence control and numerical verification3.8Sensitivity analysis and parametric study3.9Automating and reusing models3.10Exercise: building a base model
4.1Design requirements and starting criteria4.2Solution alternatives and comparative analysis4.3Sizing and safety margins4.4Selecting materials, equipment or components4.5Integration with the rest of the system4.6Cost, schedule and manufacturing constraints4.7Reliability, maintainability and service life4.8Sustainability and efficiency in design4.9Design review and risk management4.10Exercise: documented design proposal
5.1System architecture and functional breakdown5.2Interface definition and control5.3Protocols and data exchange5.4Progressive integration and interface testing5.5Electromagnetic and environmental compatibility5.6Configuration management of the whole system5.7Resolving conflicts between subsystems5.8Commissioning the integrated system5.9Traceability from requirements to verification5.10Exercise: interface matrix
6.1Hazard identification and preliminary analysis6.2Failure modes and effects analysis6.3Fault trees and quantitative analysis6.4Allocating reliability targets6.5Barriers, redundancies and fault tolerance6.6Human factors and operating errors6.7Safety evidence and argumentation6.8Risk management throughout the life cycle6.9Indicators and in-service monitoring6.10Exercise: risk analysis of a case
7.1Verification and validation strategy7.2Test plan: scope and coverage7.3Instrumentation and data acquisition7.4Laboratory testing versus field testing7.5Correlation between model and measurement7.6Handling uncertainty and tolerances7.7Failure analysis and corrective actions7.8Commissioning and acceptance criteria7.9Documenting the validation file7.10Exercise: validation report
8.1Defining the case and success criteria8.2Gathering input data and requirements8.3Planning the work and deliverables8.4Technical development guided by the tutor8.5Applying the regulatory framework to the case8.6Verifying results and critical analysis8.7Documenting the deliverable8.8Technical defence and peer review8.9Lessons learned and continuous improvement8.10Final project: final assessment and programme close
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Power BI, Tableau, MS Project, Jira and Miro, in free, academic or evaluation versions. Exercises are based on real procedures from a project office, a business prototyping lab and a portfolio analytics environment. Assessment is continuous by module, plus the final integrated project.
Standards covered: ISO 21500, ISO 56002, ISO 37001, ISO 14001, GRI Standards, CSRD (Directive (EU) 2022/2464), EU Taxonomy, Horizon Europe, Spanish Law 14/2011 on Science.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Power BI, Tableau, MS Project, Jira and Miro, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Internal Audits and Season Compliance
Online Postgraduate Diploma of 800 h in Internal Audits and Season Compliance. 8 modules covering ISO 19011:2018 guidelines for auditing management systems, ISO 37301:2021 compliance management…
Postgraduate Diploma in Rule Interpretation and Relations with Stewards
Online 800-hour Postgraduate Diploma in Rule Interpretation and Relations with Stewards. 8 modules covering the FIA International Sporting Code, FIA Statutes and Microsoft SharePoint. Assigned tutor…
Postgraduate Diploma in Technical Dossier and Parc Fermé Verification
Online 800-hour Postgraduate Diploma in Technical Dossier and Parc Fermé Verification. 8 modules covering the FIA Formula 1 Technical Regulations, FIA Formula 1 Sporting Regulations and…
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships