Diploma in Type Testing and Audits (NCAP/UNECE/NHTSA)
Online postgraduate diploma of 800 hours in type testing and audits (NCAP/UNECE/NHTSA). 8 modules covering the testing and assessment ecosystem, Euro NCAP assistance protocols, UNECE ADAS regulations, NHTSA and FMVSS testing, test instrumentation, virtual testing and audits, and test campaign management, with UN Regulation R152 (AEBS), UN Regulation R157 (ALKS) and FMVSS 127, with an assigned technical tutor.
Diploma in Type Testing and Audits (NCAP/UNECE/NHTSA) — studying from Australia
Australia has active research in autonomous systems, particularly in mining, agriculture and freight, where autonomous haulage and automated equipment are well established. Universities and research bodies collaborate closely with industry on perception, sensor fusion and vehicle software. Advanced driver assistance systems are increasingly standard in imported vehicles, creating demand for engineers who understand safety validation and software integration. Employers range from mining technology firms and research institutions to global automotive software suppliers operating local engineering teams.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this qualification recognised by Australian engineering bodies?
SEIUM's qualifications are private and not official state degrees, and they are not accredited by Engineers Australia or any other national body. Professional recognition for engineers in Australia usually runs through accredited university degrees and Engineers Australia membership. Whether a private qualification is valued is decided by employers or the relevant body.
Which Australian employers work in autonomous and ADAS software?
Australia has automotive suppliers, mining and logistics companies using autonomous systems, and technology firms working on driver assistance and vehicle software. Employers usually assess your coding ability, project portfolio and experience more than the name of a private course. Ask prospective employers how they regard the qualification.
How demanding is the course and is it workable with a job in Australia?
The programmes are online and taught in English, so you can study from home without needing a student visa. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's 1,900 hours, so consider your available time carefully. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Distinguish between type approval and consumer assessment programmes.
Interpret the Euro NCAP protocols for assistance systems.
Apply the UNECE and FMVSS regulations governing ADAS functions.
Specify the instrumentation and targets for a track test.
Assess the uncertainty and repeatability of test results.
Plan audits combining physical and virtual testing.
Manage a test campaign with realistic timescales and costs.
Who it's for
- ADAS test engineers running track campaigns.
- Type-approval technicians preparing UNECE and FMVSS submissions.
- Technical service auditors assessing manufacturers' evidence.
- NCAP assessment managers targeting star ratings.
- Vehicle validation engineers working on assistance systems.
- Track test campaign coordinators managing resources and schedules.
- Engineering or science graduates looking to enter vehicle manufacturing.
What you'll work with
- UN Regulation R152 (advanced emergency braking systems)
- UN Regulation R157 (Automated Lane Keeping Systems)
- FMVSS 127 (US automatic emergency braking standard)
- UN Regulation R79 (steering equipment and ACSF)
- UN Regulation R131 (AEBS for heavy vehicles)
- Regulation (EU) 2019/2144 (General Safety Regulation)
- ISO 19206 (test targets for ADAS evaluation)
- ISO/IEC 17025 (competence of testing laboratories)
- IPG CarMaker
- dSPACE ASM
- esmini (OpenSCENARIO)
- Vector CANape
- MATLAB
8 modules
1.1Type approval versus consumer assessment1.2Euro NCAP, NHTSA NCAP, IIHS and other programmes1.3UNECE regulations of the WP.29 Forum1.4FMVSS and self-certification in the United States1.5Technical services and type-approval authorities1.6Conformity of production1.7Protocol timetables and their evolution1.8Commercial impact of NCAP stars1.9China NCAP, JNCAP and ANCAP programmes1.10Case study: test map for a global launch
2.1Car-to-car AEB systems2.2AEB for pedestrians and cyclists2.3Lane Support Systems: LKA, ELK and LDW2.4Speed Assistance Systems2.5Driver Monitoring and Assisted Driving Grading2.6Motorcycle AEB and junction scenarios2.7Calculating scores and weightings2.8The 2026 protocol and new assessment areas2.9Blind spot and door-opening tests2.10Workshop: scoring a vehicle from test results
3.1UN R152 advanced emergency braking3.2UN R79 steering and ACSF functions3.3UN R130 lane departure warning3.4UN R131 braking for heavy vehicles3.5UN R157 ALKS systems3.6UN R171 DCAS systems3.7General Safety Regulation (EU) 2019/21443.8Test procedures and tolerances3.9Driver monitoring in UN R1573.10Practical exercise: UN R152 test matrix for a passenger car
4.1FMVSS 127 automatic emergency braking4.2The NHTSA NCAP programme and its updates4.3NHTSA ADAS confirmation test protocols4.4IIHS: braking and safeguard assessments4.5The Standing General Order and incident reporting4.6Recalls and ADAS-related defects4.7Differences between the UNECE and US approaches4.8Documentation for self-certification4.9Night-time pedestrian detection4.10Case study: comparing R152 with FMVSS 127
5.1Soft targets: GVT, EPTa, EBTa5.2Low-profile platforms and driving robots5.3RTK GNSS and reference inertial units5.4Synchronisation and data acquisition5.5Test tracks and environmental conditions5.6Measurement uncertainty and repeatability5.7Equipment calibration and traceability5.8Personnel safety on the track5.9Target guidance and propulsion systems5.10Laboratory: uncertainty analysis of an AEB test
6.1OpenSCENARIO scenarios and databases6.2Validated simulation as type-approval evidence6.3The WP.29 NATM method6.4Auditing the manufacturer's processes6.5Auditing cybersecurity management systems6.6Auditing software updates6.7Correlation between physical and virtual testing6.8Managing non-conformities6.9Credibility of simulation tools6.10Workshop: audit plan for an ALKS system
7.1Planning prototypes and track resources7.2Vehicle preparation and software configuration7.3Running internal pre-tests7.4Technical service witnesses7.5Data management and traceability of results7.6Failure analysis and retests7.7Test reports and technical files7.8Cost and timescale of a global campaign7.9Prototype confidentiality on the track7.10Practical exercise: schedule for an NCAP and type-approval campaign
8.1Selecting the vehicle and functions to assess8.2NCAP, UNECE and NHTSA requirements matrix8.3Physical and virtual test plan8.4Instrumentation specification8.5Uncertainty estimation8.6Audit and evidence plan8.7Campaign risk analysis8.8Test data management plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. You work with IPG CarMaker, dSPACE ASM, esmini (OpenSCENARIO), Vector CANape and MATLAB, in free, academic or evaluation versions. Testing is studied through real procedures: planning an AEB track test campaign, assessing results against Euro NCAP protocols, and preparing a type-approval audit. Assessment is continuous by module, plus the final project.
Standards covered: UN Regulation R152 (AEBS), UN Regulation R157 (ALKS), FMVSS 127, UN Regulation R79, UN Regulation R131, Regulation (EU) 2019/2144 (General Safety Regulation), ISO 19206 (test targets), ISO/IEC 17025.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with IPG CarMaker, dSPACE ASM, esmini (OpenSCENARIO), Vector CANape and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Dense LiDAR and 3D SLAM for Automotive
Online 800-hour Postgraduate Diploma in Dense LiDAR and 3D SLAM for Automotive. 8 modules covering IEC 60825-1:2014, ISO 26262:2018 and Open3D. Assigned tutor and open enrolment.
Postgraduate Diploma in Safe Teleoperation and Control Centres
Online Postgraduate Diploma of 800 h in safe teleoperation and control centres. 8 modules covering ISO 11064, 3GPP TS 22.186 and ROS 2. Dedicated tutor and…
Postgraduate Diploma in Benches, Rigs and Tooling for Mass Calibration
Online 800-hour Postgraduate Diploma in Benches, Rigs and Tooling for Mass Calibration. 8 modules covering IATF 16949:2016, ISO 14229-1:2020 (UDS) and Minitab. Assigned tutor and enrolment…
More in Autonomous, ADAS & Software-Defined Vehicle
All Autonomous, ADAS & Software-Defined Vehicle programmes → · How to apply · Fees & financing · Scholarships