Diploma in Tactical UAV and Mini-UAV Engineering
Online postgraduate diploma of 800 hours in tactical UAV and mini-UAV engineering. 8 modules covering UAS classes and configurations, aerodynamics and conceptual design, structures and materials, propulsion and energy, avionics and flight control with PX4 and ArduPilot, payloads and communications, and airworthiness to STANAG 4703 and Regulation (EU) 2019/947, with an assigned technical tutor.
Diploma in Tactical UAV and Mini-UAV Engineering — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$1,740 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Know the classes and configurations of tactical UAVs.
Carry out aerodynamic conceptual design.
Design lightweight structures with composite materials.
Select propulsion and energy systems.
Configure and tune flight control systems.
Integrate payloads and communication links.
Apply the regulations and plan flight tests.
Who it's for
- UAV design engineers working on fixed-wing, multirotor or VTOL platforms.
- Flight control engineers configuring and tuning autopilots.
- Avionics engineers integrating sensors, links and ground stations.
- Flight test technicians planning and running UAV test campaigns.
- Payload integration engineers working with EO/IR and multispectral sensors.
- UAS regulatory specialists handling SORA and airworthiness.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- STANAG 4703 (airworthiness of light UAVs)
- STANAG 4671 (UAV airworthiness)
- Implementing Regulation (EU) 2019/947 (rules and procedures for operating UAS)
- Delegated Regulation (EU) 2019/945 (UAS product requirements)
- STANAG 4586 (UAV control system interoperability)
- ASTM F3478 (battery design for UAS)
- XFLR5
- PX4 Autopilot
- ArduPilot
- OpenVSP
- SolidWorks
8 modules
1.1NATO UAS classification1.2Class I and Class II1.3Fixed-wing and multirotor configurations1.4Hybrid VTOL1.5Surveillance and reconnaissance missions1.6Civil applications: agriculture and emergencies1.7System components1.8Examples of platforms in service1.9Technology trends1.10Case study: comparison of configurations
2.1Mission requirements2.2Initial sizing2.3Low Reynolds number aerofoils2.4Drag polar2.5Stability and control2.6Multirotor design2.7VTOL design2.8Design tools2.9Weight estimation2.10Workshop: sizing a fixed wing with XFLR5
3.1Composite materials3.2Additive manufacturing3.3Lightweight structural design3.4Flight and landing loads3.5Finite element analysis3.6Joints and adhesives3.7Prototype manufacturing3.8Structural testing3.9Field repairability3.10Laboratory: bending test of a spar
4.1Brushless electric motors4.2Propellers and their selection4.3Lithium batteries4.4Battery management4.5Small combustion engines4.6Hybrid propulsion4.7Fuel cells4.8Endurance and range4.9Thermal management4.10Practical exercise: motor and propeller thrust stand
5.1PX4 and ArduPilot autopilots5.2Sensors: IMU, GNSS and barometer5.3State estimation5.4PID control laws5.5Flight modes5.6Waypoint navigation5.7Autonomous flight and missions5.8SITL simulation5.9Controller tuning5.10Laboratory: PID tuning in simulation
6.1EO/IR cameras6.2Gimbal stabilisers6.3Multispectral sensors6.4Command and control links6.5Video links6.6Link cybersecurity6.7Resilience to interference6.8Ground control station6.9On-board processing6.10Practical exercise: camera and gimbal integration
7.1Regulation (EU) 2019/9477.2STANAG 4703 for light UAVs7.3Military airworthiness7.4SORA assessment7.5Flight test plan7.6Safety in testing7.7Privacy and data protection7.8International law and responsible use7.9Export controls7.10Case study: test plan for a prototype
8.1Mission requirements8.2Conceptual design8.3Structural design8.4Propulsion system8.5Avionics and control8.6Payload and links8.7Test and certification plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is XFLR5, PX4 Autopilot, ArduPilot, OpenVSP and SolidWorks, in free, academic or evaluation versions. Testing is studied through real procedures for bench thrust tests, SITL flight simulations and structural tests of components. Assessment is continuous by module, plus the final project.
Standards covered: STANAG 4703, STANAG 4671, Implementing Regulation (EU) 2019/947, Delegated Regulation (EU) 2019/945, STANAG 4586 and ASTM F3478.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with XFLR5, PX4 Autopilot, ArduPilot, OpenVSP and SolidWorks, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Advanced Composites in Defence
Online postgraduate diploma of 800 hours in advanced composites in defence, structured in 8 modules covering micromechanics and laminate theory, advanced materials, structural design, damage tolerance,…
Diploma in Ethics in the Use of Military Helicopters
600-hour online postgraduate diploma in the ethics of military helicopter use: IHL, moral deliberation, humanitarian missions, civilian protection, moral injury and accountability, with an assigned tutor.
Postgraduate Diploma in Stabilisation of Gun Turrets and Weapon Platforms
Online 800-hour Postgraduate Diploma in Stabilisation of Gun Turrets and Weapon Platforms. 8 modules with MIL-STD-810H (environmental testing), MIL-STD-461G (electromagnetic compatibility) and MATLAB/Simulink. Assigned tutor and…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships