Postgraduate DiplomaDefense, Military Engineering & Land Systems Applications open

Diploma in SDR for Secure Military Communications

Online postgraduate diploma of 800 hours in software-defined radio (SDR) for secure military communications, structured in 8 modules covering SDR fundamentals, standardised architectures (SCA 4.1), waveform design, security in programmable radios (FIPS 140-3), FPGA implementation, cognitive radio, and testing and certification (MIL-STD-188-110D), with an assigned technical tutor.

Duration6–8 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma

Diploma in SDR for Secure Military Communications — studying from Australia

Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.

Fees for Australia: A$2,050 (AUD), with instalments and employer sponsorship available.

Relevant bodies in Australia

  • Department of Defence
  • Defence Science and Technology Group (DSTG)
  • Australian Defence Force (ADF)
  • Standards Australia

Typical roles

  • Defence Systems Engineer
  • Land Systems Engineer
  • Military Engineering Officer
  • Capability Sustainment Engineer

Questions from Australia

How does defence engineering recognition work in Australia?

Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.

Which Australian employers hire in defence and land systems?

Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.

Is the course manageable with a job, and does it need a visa?

The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Understand the architecture of a software-defined radio.

02

Apply the SCA architecture to portable waveforms.

03

Design and simulate digital waveforms.

04

Integrate security measures into programmable radios.

05

Implement processing blocks on FPGAs.

06

Know cognitive radio techniques.

07

Plan testing and certification of tactical radios.

Profile

Who it's for

  • Software-defined radio engineers.
  • FPGA developers.
  • Signal processing engineers.
  • Secure communications specialists.
  • RF test engineers.
  • Cognitive radio researchers.
  • Engineering or science graduates looking to enter the defence sector.
Standards & tools

What you'll work with

  • SCA 4.1 (Software Communications Architecture)
  • FIPS 140-3 (security requirements for cryptographic modules)
  • MIL-STD-188-110D (HF data modem interoperability)
  • MIL-STD-461G (electromagnetic interference requirements for equipment)
  • NIST SP 800-90A Rev. 1 (random number generation using deterministic generators)
  • GNU Radio
  • REDHAWK
  • MATLAB
  • AMD Vivado
  • USRP UHD
Syllabus

8 modules

  1. 1.1Architecture of an SDR
  2. 1.2Sampling and AD/DA conversion
  3. 1.3Radio-frequency front ends
  4. 1.4FPGA versus general-purpose processor
  5. 1.5Digital signal processing
  6. 1.6Digital modulations
  7. 1.7Digital filters
  8. 1.8Carrier and symbol synchronisation
  9. 1.9Advantages and limitations
  10. 1.10Practical exercise: FM receiver with GNU Radio
  1. 2.1Software Communications Architecture 4.1
  2. 2.2The ESSOR architecture
  3. 2.3Waveform portability
  4. 2.4Components and containers
  5. 2.5Middleware and APIs
  6. 2.6Device interfaces
  7. 2.7SCA compliance certification
  8. 2.8Waveform library
  9. 2.9Configuration management
  10. 2.10Laboratory: components in REDHAWK
  1. 3.1OFDM modulation
  2. 3.2Spread-spectrum principles
  3. 3.3MIMO systems
  4. 3.4Channel coding
  5. 3.5Narrowband waveforms
  6. 3.6Wideband waveforms
  7. 3.7Coalition waveforms
  8. 3.8Design trade-offs
  9. 3.9Performance simulation
  10. 3.10Case study: analysis of an OFDM waveform
  1. 4.1Red-black separation
  2. 4.2Cryptographic modules
  3. 4.3Secure programming
  4. 4.4Signed waveform loading
  5. 4.5FPGA secure boot
  6. 4.6TEMPEST emanations
  7. 4.7User authentication
  8. 4.8Key management
  9. 4.9Attack surface of an SDR
  10. 4.10Workshop: red-black architecture
  1. 5.1VHDL and Verilog languages
  2. 5.2High-level synthesis
  3. 5.3IP cores
  4. 5.4Resources and timing
  5. 5.5DSP blocks
  6. 5.6The Vivado tool
  7. 5.7Simulation and testing
  8. 5.8Formal verification
  9. 5.9Integration with the processor
  10. 5.10Laboratory: FIR filter on an FPGA
  1. 6.1Spectrum sensing
  2. 6.2Dynamic access
  3. 6.3Machine learning in radio
  4. 6.4Spectrum management
  5. 6.5System coexistence
  6. 6.6Interference mitigation
  7. 6.7Regulatory framework
  8. 6.8Coexistence testing
  9. 6.9Use cases
  10. 6.10Case study: spectrum occupancy measurement
  1. 7.1Radio-frequency measurements
  2. 7.2Bit error rate
  3. 7.3Interoperability testing
  4. 7.4Cryptographic certification
  5. 7.5Electromagnetic compatibility
  6. 7.6Environmental testing
  7. 7.7The European ESSOR programme
  8. 7.8Lessons from the JTRS programme
  9. 7.9Product life cycle
  10. 7.10Case study: interoperability test plan
  1. 8.1System requirements
  2. 8.2Platform selection
  3. 8.3Waveform design
  4. 8.4Security architecture
  5. 8.5Implementation
  6. 8.6Test plan
  7. 8.7Performance analysis
  8. 8.8Certification roadmap
  9. 8.9Report and presentation
  10. 8.10Final project: final review with the tutor
Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme can be combined with your job.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is GNU Radio, REDHAWK, MATLAB, AMD Vivado and USRP UHD, in free, academic or evaluation versions. Testing is studied through real procedures for bit error rate measurements, waveform interoperability testing and red-black architecture verification. Assessment is continuous by module, plus the final project.

Standards covered: SCA 4.1, FIPS 140-3, MIL-STD-188-110D, MIL-STD-461G, NIST SP 800-90A Rev. 1.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.
Standards-based learning:guided reading of SCA 4.1, FIPS 140-3 and MIL-STD-188-110D applied to real cases, not as a theoretical annex.
Industry software:GNU Radio, REDHAWK, MATLAB, AMD Vivado and USRP UHD, in free, academic or evaluation versions.
Final project:a secure SDR design covering platform selection, waveform, security architecture, implementation, testing and certification roadmap, reviewed by your tutor.
Flexible format:100% online, no fixed timetables, compatible with full-time work.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

GNU Radio receiver
Build an FM receiver in GNU Radio to master the SDR processing chain.
OFDM waveform analysis
Design and simulate an OFDM waveform and evaluate its performance.
Red-black architecture
Define a red-black security architecture with signed waveform loading and key management.
FPGA FIR filter
Implement and verify a FIR filter on an FPGA with Vivado.
Final project
A complete secure SDR design with waveform, security architecture, test plan and certification roadmap, reviewed by your tutor.
Career opportunities

Where this takes you

Software-defined radio engineerFPGA developerSignal processing engineerSecure communications specialistRF test engineerCognitive radio researcher
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. No university degree is required.
  • Internet connection and a computer capable of running the programme software.
  • English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

FAQ

Frequently asked questions

The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with GNU Radio, REDHAWK, MATLAB, AMD Vivado and USRP UHD, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.

Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Diploma in SDR for Secure Military CommunicationsEnrol
Scroll to Top
SEIUM – Institute of Advanced Engineering
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.