Diploma in Real-Time Plant Monitoring
Online postgraduate diploma of 800 hours in real-time monitoring of nuclear plants, structured in 8 modules covering instrumentation and control, neutron and core monitoring, plant radiation monitoring, data acquisition and supervision, equipment condition monitoring, advanced analytics and qualification requirements, with an assigned technical tutor.
Diploma in Real-Time Plant Monitoring — studying from Australia
Australia does not operate nuclear power plants, but nuclear science and technology play important roles in research, medicine, mining and regulation. The Australian Nuclear Science and Technology Organisation operates research reactors and produces radiopharmaceuticals, while uranium mining is conducted in South Australia, the Northern Territory and Queensland. Nuclear engineering skills support regulatory oversight, radiation safety and decommissioning activities. Employers include ANSTO, the Australian Radiation Protection and Nuclear Safety Agency, mining companies and specialist consultancies.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does this programme meet Australian nuclear licensing or regulatory requirements?
No. SEIUM qualifications are private and are not accredited by any national body. Nuclear activities in Australia are regulated by the Australian Radiation Protection and Nuclear Safety Agency and related authorities, which set their own competency requirements. Check directly with the regulator and your employer about any qualifications needed for a specific role.
Which Australian organisations might consider this training for nuclear-related roles?
Australian employers in this area include research organisations, radiation protection services, mining and resources companies, and consultancies working on nuclear-related projects. Hiring depends on each organisation's requirements and on security and licensing needs. A private qualification is unlikely to be sufficient alone, so combine it with relevant experience.
Is the programme workable alongside a job, and how is it funded?
The programmes are delivered entirely online in English with an assigned technical tutor, allowing study from Australia around work commitments. Fees can be paid in instalments, and employer sponsorship is possible. Review the programme length, from 300 to 1,900 hours, and plan carefully.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the instrumentation and control architecture of nuclear power plants.
Analyse neutron monitoring of the reactor core.
Understand plant radiation monitoring systems.
Design data acquisition and supervisory systems.
Apply condition monitoring techniques.
Use advanced analytics for diagnostics.
Apply regulatory qualification requirements.
Who it's for
- Nuclear instrumentation and control engineers
- Radiation monitoring technicians
- Supervisory systems engineers
- Plant data analysts
- Predictive maintenance engineers
- Equipment qualification engineers
- Engineering or science graduates looking to move into nuclear power plants
What you'll work with
- IEC 61513 (general requirements for I&C systems important to safety)
- IEC 60880 (software for computer-based systems performing category A functions)
- IEC 61226 (categorisation of I&C functions important to safety)
- IEC 62645 (cybersecurity requirements for nuclear I&C systems)
- IAEA SSG-39 (design of instrumentation and control systems for nuclear power plants)
- IEEE 603 (criteria for safety systems for nuclear power generating stations)
- IEC 60951 (radiation monitoring equipment for accident and post-accident conditions)
- 10 CFR 50.55a (US NRC codes and standards requirements)
- OSIsoft PI System
- MATLAB
- Python with scikit-learn
- LabVIEW
- Plant simulators
8 modules
1.1Instrumentation and control architecture1.2Safety and non-safety systems1.3Reactor protection systems1.4Classification of I&C systems1.5Process instrumentation1.6Nuclear in-core instrumentation1.7Main control room1.8Evolution towards digital systems1.9Independence and redundancy requirements1.10Case study: I&C architecture of a PWR
2.1Ex-core neutron detectors2.2Movable and fixed in-core instrumentation2.3Reactor power measurement2.4Axial power distribution2.5Self-powered neutron detectors2.6Core exit thermocouples2.7Neutron noise monitoring2.8Calibration of nuclear instrumentation2.9Technical specification limits2.10Laboratory: analysis of neutron noise signals
3.1Process radiation monitors3.2Area monitors3.3Effluent monitors3.4Primary coolant leak monitoring3.5Post-accident radiation monitors3.6Personnel dosimetry3.7Environmental radiological monitoring network3.8Integration in the control room3.9Regulatory monitoring requirements3.10Practical exercise: configuring alarms on an effluent monitor
4.1Plant process computer4.2SCADA systems in nuclear power plants4.3Data historians4.4Safety parameter display4.5Emergency response data system4.6Data transmission to the regulator4.7Human-machine interface design4.8Alarm management4.9Cybersecurity of digital systems4.10Laboratory: parameter trends in a data historian
5.1Vibration monitoring of pumps5.2Loose parts monitoring5.3Leak detection by acoustic emission5.4Monitoring of motor-operated valves5.5Monitoring of main transformers5.6Turbine and generator monitoring5.7Thermography in the plant5.8Condition-based maintenance5.9Ageing management5.10Practical exercise: diagnosis of a coolant pump
6.1Online signal validation6.2Online sensor calibration monitoring6.3Anomaly detection6.4Empirical process models6.5Machine learning in nuclear power plants6.6Plant digital twins6.7Operator support systems6.8Explainability of algorithms6.9Software qualification6.10Laboratory: validation of redundant signals
7.1IEC SC 45A standards7.2IAEA guides for I&C7.3Environmental and seismic qualification7.4Safety-category software7.5Diversity and defence in depth7.6Common cause failure7.7Requirements of the Nuclear Safety Council (CSN)7.8Management of design modifications7.9Cybersecurity according to IEC 626457.10Case study: modernisation of a supervisory system
8.1Selection of the plant system8.2Requirements analysis8.3Sensor selection8.4Acquisition architecture8.5Diagnostic functions8.6Qualification plan8.7Design conclusions8.8Implementation recommendations8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits alongside your job.
Each module combines theory, guided reading of the original standards and applied exercises. You work with OSIsoft PI System, MATLAB, Python with scikit-learn, LabVIEW and plant simulators in free, academic or evaluation versions. Practical work is based on real procedures for online signal validation, neutron noise analysis and diagnosis of rotating equipment. Assessment is continuous by module, plus a final capstone project.
Standards covered: IEC 61513, IEC 60880, IEC 61226, IEC 62645, IAEA SSG-39, IEEE 603, IEC 60951, 10 CFR 50.55a.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with OSIsoft PI System, MATLAB, Python with scikit-learn, LabVIEW and plant simulators, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Monitoring and Security in Transport
Online postgraduate diploma of 800 hours in monitoring and security in the transport of nuclear and radioactive material, structured in 8 modules covering the nuclear security…
Diploma in Radionuclide Dispersion Modelling
Online postgraduate diploma of 800 hours in radionuclide dispersion modelling, structured in 8 modules covering boundary-layer meteorology, source term, Gaussian, Lagrangian and Eulerian models, aquatic dispersion,…
Diploma in Radioactive Material Cask Design
Online postgraduate diploma of 800 hours in radioactive material cask design, structured in 8 modules covering cask functions, regulatory design requirements, shielding, criticality, thermal and structural…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships