Diploma in Precision Reconstruction and Alignment with CAD
Online postgraduate diploma of 800 hours in precision reconstruction and CAD alignment. 8 modules covering 3D reconstruction metrology, high-precision capture, registration and view fusion, meshing and surface modelling, CAD alignment, deviation analysis, and uncertainty and validation, with an assigned technical tutor.
Diploma in Precision Reconstruction and Alignment with CAD — studying from Australia
Data, artificial intelligence and simulation are central to Australian industries including mining, banking, health, agriculture and government. Organisations use machine learning, digital twins and advanced analytics to improve productivity, asset performance and decision making. National science agency CSIRO, along with universities and a growing start-up ecosystem, drives research and applied innovation. Australia has also developed national AI ethics principles, making responsible design an important professional consideration. Engineers in this area typically work for technology firms, consultancies, research organisations and large enterprises.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Which Australian bodies recognise data and AI engineering skills?
Engineers Australia and the Australian Computer Society (ACS) are the main professional bodies, and the ACS runs a skills assessment for migration purposes. SEIUM's private qualifications are not accredited by either. Whether a private qualification is valued is decided by the employer or the relevant body.
What data and AI careers exist in Australia for this training?
Australia has demand for data scientists, AI engineers and simulation analysts across finance, health, mining, government and technology firms. Employers mainly assess your portfolio, technical skills and results. A SEIUM qualification may support your profile, but each employer decides its relevance.
Can I study this online from Australia while working?
Yes, the programmes are fully online and taught in English, and no student visa is needed to study from home. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900, with an assigned technical tutor and a final project. Fees can be paid in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Select the right reconstruction technology for each tolerance.
Plan high-precision captures while controlling sources of error.
Register and fuse multiple views with robust algorithms.
Generate meshes and surfaces suitable for metrology and reverse engineering.
Apply CAD alignment strategies and assess their influence.
Analyse deviations and communicate results with PMI and QIF.
Estimate uncertainty and validate inspection procedures.
Who it's for
- 3D metrology engineers working with scanners and CT.
- Dimensional inspection technicians comparing parts against CAD.
- Reverse engineering specialists rebuilding parametric models.
- Quality engineers responsible for inspection reports.
- Robotic scanning programmers automating measurement cells.
- Manufacturing process engineers who rely on deviation data.
- Engineering or science graduates seeking to enter the automotive sector.
What you'll work with
- ISO 10360-8:2013 (acceptance tests for CMMs with optical distance sensors)
- VDI/VDE 2634 Blatt 2 (optical 3D measuring systems: area-scanning systems)
- ISO 1101:2017 (geometrical tolerancing)
- ISO 14253-1:2017 (decision rules for verifying conformity with specifications)
- ISO 10303-242 (STEP AP242) (managed model-based 3D engineering data exchange)
- ASME Y14.5-2018 (dimensioning and tolerancing)
- ANSI/DMSC QIF 3.0 (Quality Information Framework)
- JCGM 100:2008 (GUM) (guide to the expression of uncertainty in measurement)
- GOM Inspect
- PolyWorks Inspector
- Geomagic Design X
- Open3D
- CloudCompare
8 modules
1.1Accuracy, precision and resolution1.2Systematic and random errors1.3Contact and optical scanning technologies1.4Laser line and blue light scanners1.5Industrial computed tomography1.6Laser trackers and measuring arms1.7Traceability to the metre1.8Laboratory environmental conditions1.9Selecting the technology according to tolerance1.10Workshop: choosing a system for three typical parts
2.1Planning scanning paths2.2Surface preparation and matting2.3Referencing with targets2.4Robotic and automated scanning2.5Occlusions and hidden areas2.6Part temperature control2.7Fixture repeatability2.8Scanning large parts in sections2.9Recording measurement conditions2.10Lab: scanning a machined part with blue light
3.1Coarse feature-based registration3.2Point-to-point and point-to-plane ICP3.3Robust and weighted ICP3.4Global registration with targets3.5Joint adjustment of multiple views3.6Error propagation in registration3.7TSDF volumetric fusion3.8Drift detection in large parts3.9Assessing registration quality3.10Lab: multi-view registration with Open3D
4.1Triangulation and Poisson reconstruction4.2Mesh repair and hole filling4.3Edge-preserving smoothing4.4Error-controlled decimation4.5NURBS surface fitting4.6Extraction of geometric primitives4.7Parametric reverse engineering4.8Export to STEP4.9Mesh quality for metrology4.10Practical exercise: NURBS surface from a scanned mesh
5.1Coordinate systems and datums5.2Least-squares best-fit alignment5.3RPS reference point alignment5.43-2-1 plane-based alignment5.5Datum alignment according to GD&T5.6Weighting and constraints in alignment5.7Influence of alignment on results5.8Alignment of flexible parts5.9Comparison of strategies5.10Lab: RPS and best-fit alignments in GOM Inspect
6.1Deviation colour maps6.2Sections and profiles6.3Evaluation of geometric features6.4Surface profile tolerances6.5PMI information in STEP AP2426.6Automated inspection reports6.7Statistics of part series6.8Interoperability with QIF6.9Communicating results to manufacturing6.10Case study: deviation analysis of an injection-moulded part
7.1Scanning and registration uncertainty7.2Alignment uncertainty7.3Master and calibrated parts7.4Verification according to ISO 10360-87.5Tests according to VDI/VDE 2634 Blatt 27.6Monte Carlo of the measurement chain7.7ISO 14253-1 decision rules7.8Repeatability and reproducibility studies7.9Procedure validation7.10Case study: uncertainty budget for an inspection
8.1Part selection and requirements8.2Capture plan8.3Scanning and view registration8.4Processing and meshing8.5Alignment with the CAD model8.6Deviation analysis8.7Uncertainty budget8.8Final inspection report8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits alongside your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is GOM Inspect, PolyWorks Inspector, Geomagic Design X, Open3D and CloudCompare, in free, academic or evaluation versions. Case studies are based on real procedures: structured-light scanning of machined parts, alignment of point clouds with CAD models and deviation analysis of production series. Assessment is continuous by module, plus the final integrating project.
Standards covered: ISO 10360-8:2013, VDI/VDE 2634 Blatt 2, ISO 1101:2017, ISO 14253-1:2017, ISO 10303-242 (STEP AP242), ASME Y14.5-2018, ANSI/DMSC QIF 3.0, JCGM 100:2008 (GUM)
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with GOM Inspect, PolyWorks Inspector, Geomagic Design X, Open3D and CloudCompare, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Root Cause Analytics and Data-Based Diagnostics
Online postgraduate diploma of 800 hours in root cause analytics and data-driven diagnosis. 8 modules covering classical root cause analysis, diagnostic data preparation, multivariate statistics, explainable…
Diploma in 1D/3D Coupling and Co-Sim Orchestration
Online postgraduate diploma of 800 hours in 1D/3D coupling and co-simulation orchestration: 8 modules covering co-simulation and multi-domain modelling, Modelica and 1D modelling, the FMI and…
Diploma in Differential Privacy and Applied Crypto
Online postgraduate diploma of 800 hours in differential privacy and applied cryptography, with 8 modules covering re-identification risk, differential privacy, private machine learning, cryptographic foundations, homomorphic…
More in Data, AI, Simulation & Analytics
All Data, AI, Simulation & Analytics programmes → · How to apply · Fees & financing · Scholarships