Diploma in NATO Standards for CMS Systems
Online postgraduate diploma of 800 hours in NATO standards for combat management systems (CMS), with 8 modules covering naval CMS, NATO tactical data links, open architectures and middleware, sensor integration, interoperability in combined operations, cybersecurity and verification and certification, with an assigned technical tutor.
Diploma in NATO Standards for CMS Systems — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$1,740 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the functional architecture of naval combat management systems.
Interpret NATO tactical data link standards.
Apply real-time middleware and open architectures.
Manage the integration of on-board sensors and systems.
Assess interoperability in combined operations.
Take cybersecurity and system safety requirements into account.
Plan the verification and certification of combat systems.
Who it's for
- Naval combat systems engineers.
- Systems architects in naval defence.
- Tactical data link engineers.
- Integration and test engineers.
- NATO interoperability specialists.
- Real-time software engineers.
- Engineering or science graduates seeking to enter naval defence.
What you'll work with
- STANAG 5516 (Link 16)
- STANAG 5511 (Link 11)
- STANAG 5522 (Link 22)
- STANAG 5518 (JREAP)
- MIL-STD-6016 (TADIL J messages)
- OMG DDS (Data Distribution Service)
- IEC 61162 (maritime navigation equipment interfaces)
- ISO/IEC/IEEE 15288 (system life-cycle processes)
- RTI Connext DDS
- Cameo Systems Modeler
- Wireshark
- MATLAB
8 modules
1.1Functions of a naval CMS1.2Common tactical picture1.3Sensor data fusion1.4Track management1.5Operator decision support1.6Centralised and distributed architectures1.7Historical evolution of CMS1.8European combat system programmes1.9Human factors in consoles1.10Case study: functional architecture of a CMS
2.1Structure of NATO naval standardisation2.2Link 11 and its legacy2.3Link 16 and J-series messages2.4Link 22 and its evolution2.5JREAP over IP2.6Data link network management2.7Data link conformance testing2.8Interoperability certification2.9Change management in standards2.10Practical exercise: analysis of data link messages
3.1Open systems architectures3.2Data Distribution Service (DDS)3.3Real-time quality of service3.4Partitioning and virtualisation3.5Containers in embedded systems3.6Standardised interfaces3.7Modularity and obsolescence3.8Safety-critical real-time software3.9Architecture modelling3.10Lab: track communication with DDS
4.1Surveillance radars and their interface4.2Sonar and acoustic systems4.3Electro-optical systems4.4Navigation and platform data4.5IEC 61162 interfaces4.6Time synchronisation4.7Data recording4.8System configuration management4.9Integration at the shipyard4.10Case study: integration plan for a new sensor
5.1Allied interoperability requirements5.2Federated Mission Networking5.3Exchange of classified information5.4Multi-level gateways5.5Interoperability exercises5.6Identity management5.7Coordination with air forces5.8Bandwidth limitations5.9Lessons learned5.10Workshop: interoperability matrix for a frigate
6.1Threats to embedded systems6.2Defence in depth6.3On-board network segmentation6.4Security accreditation6.5Functional safety of the system6.6Cybersecurity monitoring6.7Patch management on ships6.8Software supply chain6.9Incident response6.10Practical exercise: risk analysis of on-board cybersecurity
7.1Systems engineering to ISO/IEC/IEEE 152887.2Verification strategy7.3Land-based integration centres7.4Harbour and sea trials7.5Simulation and stimulation7.6Maintaining interoperability certification7.7Non-conformance management7.8Maintaining certification7.9Through-life support7.10Case study: sea trials plan for a CMS
8.1Defining the ship and mission8.2Functional requirements8.3System architecture8.4Required data links8.5Integration plan8.6Cybersecurity analysis8.7Verification plan8.8NATO compliance matrix8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is RTI Connext DDS, Cameo Systems Modeler, Wireshark and MATLAB, in free, academic or evaluation versions. Practical work is based on real procedures: interoperability analysis of data link messages, combat system architecture modelling and review of an on-board integration plan. Assessment is continuous by module, plus the final integrative project.
Standards covered: STANAG 5516, STANAG 5511, STANAG 5522, STANAG 5518, MIL-STD-6016, OMG DDS, IEC 61162, ISO/IEC/IEEE 15288.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- A computer capable of running the programme software and an internet connection.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with RTI Connext DDS, Cameo Systems Modeler, Wireshark and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a suitable computer and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Military Multimodal Sensor Validation
Online postgraduate diploma of 800 hours in Military Multimodal Sensor Validation. 8 modules covering multimodal sensors, metrology and uncertainty (GUM, ISO 5725), calibration, fusion validation, simulation…
Diploma in Fatigue and Durability of Military Aircraft
Online postgraduate diploma of 800 hours in fatigue and durability of military aircraft. 8 modules covering service loads and spectra, metal fatigue, crack growth, design philosophies…
Diploma in SATCOM and NATO Standards
Online postgraduate diploma of 800 hours in SATCOM and NATO standards. 8 modules covering satellite link fundamentals, space segment and payload, ground terminals, waveforms and medium…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships