Apply now
Postgraduate DiplomaAerospace, UAM, Drones & Space Applications open

Diploma in Modular Systems Integration and Assurance

Online postgraduate diploma of 800 hours in modular systems integration and assurance. 8 modules covering modular aircraft systems, integration strategy, integration rigs, integrated system verification, safety assurance, product assurance and certification with SAE ARP4754B, RTCA DO-297 and IBM DOORS Next, with an assigned technical tutor.

Duration6–8 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor

Diploma in Modular Systems Integration and Assurance — studying from Australia

Australia's aerospace sector spans defence and commercial aviation, maintenance, repair and overhaul, and a growing space industry. Key clusters sit around Adelaide's Edinburgh Parks and the Melbourne and Sydney defence precincts, with major employers including Airbus Australia Pacific, BAE Systems Australia, Boeing Defence Australia and Lockheed Martin Australia. Recreational and commercial drone operations are increasingly regulated, and advanced air mobility is emerging as a research and policy priority. Engineers working in this area typically support airworthiness, systems integration, structures and avionics across both crewed and uncrewed platforms.

Fees for Australia: A$1,740 (AUD), with instalments and employer sponsorship available.

Relevant bodies in Australia

  • Civil Aviation Safety Authority (CASA)
  • Australian Transport Safety Bureau (ATSB)
  • Defence Science and Technology Group (DSTG)
  • Standards Australia

Typical roles

  • Aerospace Engineer
  • Avionics Engineer
  • Airworthiness Engineer
  • Drone Systems Engineer

Questions from Australia

Does a SEIUM qualification help me get recognised by a professional body in Australia?

SEIUM qualifications are private qualifications, not official state degrees, and they are not accredited by any Australian body. Engineers Australia accredits university engineering degrees, and the Civil Aviation Safety Authority (CASA) regulates drone and aviation operations. Recognition of a private qualification is decided by the employer or the relevant body, so check with them before enrolling.

Will this course help me find work in Australian aerospace, drones or space?

Australia has aerospace and defence employers, drone operators and space-sector companies, and skills in these areas are valued. Whether a SEIUM qualification counts for a given role depends on the employer, who will usually weigh your experience and portfolio alongside any private credential. Ask prospective employers how they view it.

Can I study this part-time while working, and does the time zone suit Australia?

The programmes are fully online and taught in English, so you can study from anywhere in Australia, with no student visa needed for home study. Master's programmes total 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours, so plan your weekly load realistically. Fees are payable in instalments, and employer sponsorship may be possible.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Analyse modular architectures and their interfaces.

02

Design incremental integration strategies.

03

Configure integration environments and test rigs.

04

Verify integrated systems using coverage criteria.

05

Assure the safety of integrated systems.

06

Apply aerospace quality assurance systems.

07

Prepare the acceptance and certification of modular systems.

Profile

Who it's for

  • Systems integration engineers.
  • Product assurance managers.
  • Test rig engineers.
  • Aerospace quality engineers.
  • Interface managers.
  • Systems verification engineers.
  • Engineering or science graduates looking to join aircraft manufacturers.
Standards & tools

What you'll work with

  • SAE ARP4754B (development of civil aircraft and systems)
  • RTCA DO-297 (integrated modular avionics development and certification)
  • ISO/IEC/IEEE 15288 (system life cycle processes)
  • AS9100D (aerospace quality management systems)
  • SAE ARP4761A (safety assessment process)
  • AS9102 (first article inspection)
  • ECSS-Q-ST-20C (space quality assurance)
  • RTCA DO-160G (environmental conditions and test procedures)
  • IBM DOORS Next
  • dSPACE SCALEXIO
  • NI VeriStand
  • Polarion ALM
  • MATLAB/Simulink
Syllabus

8 modules

  1. 1.1Modularity and open architectures
  2. 1.2Platform standards
  3. 1.3Interface definition
  4. 1.4Module reuse
  5. 1.5Product families
  6. 1.6Scalability
  7. 1.7Examples in aircraft and helicopters
  8. 1.8Operational advantages
  9. 1.9Integration risks
  10. 1.10Workshop: modularity analysis of a system
  1. 2.1Incremental integration
  2. 2.2Bottom-up and top-down approaches
  3. 2.3Integration plan
  4. 2.4Integration sequence
  5. 2.5Entry and exit criteria
  6. 2.6Simulators and stubs
  7. 2.7Integration of supplied items
  8. 2.8Interface control documents
  9. 2.9Integration risks
  10. 2.10Practical exercise: integration plan for an avionics system
  1. 3.1Iron bird
  2. 3.2System rigs
  3. 3.3Hardware-in-the-loop
  4. 3.4Avionics rigs
  5. 3.5Environment simulation
  6. 3.6Instrumentation and data acquisition
  7. 3.7Test automation
  8. 3.8Test data management
  9. 3.9Rig representativeness
  10. 3.10Lab: configuring a HIL rig
  1. 4.1Interface testing
  2. 4.2End-to-end functional testing
  3. 4.3Degraded-mode testing
  4. 4.4Fault injection
  5. 4.5Performance testing
  6. 4.6Regression after changes
  7. 4.7Requirements coverage
  8. 4.8Anomaly management
  9. 4.9Test reports
  10. 4.10Practical exercise: fault injection campaign
  1. 5.1Safety in integrated systems
  2. 5.2Cascading effects
  3. 5.3Shared resources and common cause
  4. 5.4Interface analysis
  5. 5.5Validation of safety assumptions
  6. 5.6Verification of mitigations
  7. 5.7Safety in configuration changes
  8. 5.8Safety evidence
  9. 5.9Independent reviews
  10. 5.10Case study: analysis of a cascading failure
  1. 6.1AS9100D requirements
  2. 6.2AS9102 first article inspection
  3. 6.3Supplier control
  4. 6.4Non-conformance management
  5. 6.5Configuration management
  6. 6.6Product audits
  7. 6.7Counterfeit parts prevention
  8. 6.8FOD and tool control
  9. 6.9Continuous improvement
  10. 6.10Case study: supplier audit
  1. 7.1Acceptance testing
  2. 7.2Integration deliverables
  3. 7.3Certification data
  4. 7.4Incremental acceptance of modules
  5. 7.5Environmental qualification
  6. 7.6Ground and flight testing
  7. 7.7In-service support
  8. 7.8Modification management
  9. 7.9Programme close-out
  10. 7.10Case study: acceptance package for a module
  1. 8.1System to be integrated
  2. 8.2Interfaces and ICDs
  3. 8.3Strategy and sequence
  4. 8.4Rig design
  5. 8.5Verification plan
  6. 8.6Assurance plan
  7. 8.7Risk analysis
  8. 8.8Conclusions
  9. 8.9Report and presentation
  10. 8.10Final project: final review with the tutor
Methodology, software & labs

How you'll learn

100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within the intake, so it fits around your job.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is IBM DOORS Next, dSPACE SCALEXIO, NI VeriStand, Polarion ALM and MATLAB/Simulink, in free, academic or evaluation versions. Practical work is based on real procedures: configuring HIL integration rigs, drawing up incremental integration plans and carrying out product assurance audits. Assessment is continuous per module plus the final project.

Standards covered: SAE ARP4754B, RTCA DO-297, ISO/IEC/IEEE 15288, AS9100D, SAE ARP4761A, AS9102, ECSS-Q-ST-20C, RTCA DO-160G.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.
Standards-based learning:guided reading of SAE ARP4754B, RTCA DO-297 and ISO/IEC/IEEE 15288 applied to real cases, not as a theoretical annex.
Industry software:IBM DOORS Next, dSPACE SCALEXIO, NI VeriStand, Polarion ALM and MATLAB/Simulink, in free, academic or evaluation versions.
Final project:A modular integration project covering ICDs, integration strategy, rig design, verification and assurance, reviewed by your tutor.
Flexible format:100% online, no fixed timetables, compatible with full-time work.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Interfaces and ICDs
Define the system to be integrated and its interface control documents.
Integration strategy
Set out the incremental integration strategy and sequence.
Rig design
Design the HIL integration rig for the system.
Verification and assurance plans
Prepare the verification plan, the assurance plan and the risk analysis.
Final project
Conclusions, report and presentation, reviewed by your tutor.
Career opportunities

Where this takes you

Systems integration engineerProduct assurance managerTest rig engineerAerospace quality engineerInterface managerSystems verification engineer
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. No university degree is required.
  • Internet connection and a computer able to run the programme software.
  • English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with IBM DOORS Next, dSPACE SCALEXIO, NI VeriStand, Polarion ALM and MATLAB/Simulink, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.

Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Keep exploring

Related programmes

See all in Aerospace, UAM, Drones & Space
Postgraduate DiplomaA$2,050

Diploma in Hall/Ion Thrusters and PPU

Online postgraduate diploma of 800 hours in Hall/ion thrusters and PPUs: 8 modules covering electric propulsion fundamentals, applied plasma physics, Hall-effect and gridded ion thrusters, power…

6–8 monthsOnlineAerospace, UAM, Drones & Space
Postgraduate DiplomaA$2,380

UAS CNG Diploma: Guiding, Navigation and Control

Online postgraduate diploma of 800 hours in UAS guidance, navigation and control (GNC). 8 modules covering dynamic modelling, inertial navigation, state estimation, flight control, guidance and…

6–8 monthsOnlineAerospace, UAM, Drones & Space
Postgraduate DiplomaA$2,050

Diploma in Drone Fleet Management and Inspection Data

Online postgraduate diploma of 800 hours in drone fleet management and inspection data. 8 modules covering fleet management, maintenance and airworthiness, operations and compliance, inspection data…

6–8 monthsOnlineAerospace, UAM, Drones & Space
Diploma in Modular Systems Integration and AssuranceEnrol
Related programmes

More in Aerospace, UAM, Drones & Space

Diploma in Satellite AIT: Environmental and Functional TestingView programme →Diploma in Aerospace NDT (UT/RT/ET/MT/PT)View programme →Diploma in Airport Master Plan and CapacityView programme →Diploma in Avionics Networks and Communications CertificationView programme →Diploma in SAF Implementation and Fuel CertificationView programme →Diploma in Tactical Prediction and Aeronautical NowcastingView programme →

All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.