Diploma in Long-Term Critical Component Management
Online postgraduate diploma of 800 hours in long-term critical component management. 8 modules covering obsolescence in long-life systems, proactive obsolescence management, resolution strategies, long-term storage, counterfeiting and the supply chain, design for sustainment, and contracting and governance, applied to IEC 62402:2019, SAE AS5553 and SAE AS6081, with an assigned technical tutor.
Diploma in Long-Term Critical Component Management — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$2,050 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the causes and impacts of obsolescence.
Implement proactive management in line with IEC 62402.
Select cost-effective resolution strategies.
Plan the long-term storage of components.
Prevent counterfeit components from entering the supply chain.
Design systems that are sustainable over the long term.
Integrate obsolescence into contracts and governance.
Who it's for
- Obsolescence managers.
- Component engineers.
- Supply chain managers.
- Sustainment engineers.
- Component quality inspectors.
- Programme managers.
- Engineering or science graduates looking to move into defence.
What you'll work with
- IEC 62402:2019 (obsolescence management)
- SAE AS5553 (counterfeit electronic parts prevention)
- SAE AS6081 (counterfeit prevention for distributors)
- IEC 62435 (long-term storage of electronic components)
- SD-22 (US Department of Defense DMSMS guidebook)
- Regulation (EU) 2024/1252 (critical raw materials)
- J-STD-020 (moisture sensitivity classification)
- SiliconExpert
- IHS Markit Parts Management
- SAP
- Microsoft Power BI
- Siemens Teamcenter
8 modules
1.1Life cycles of platforms and components1.2Mismatch between life cycles1.3Types of obsolescence1.4DMSMS and its impact1.5Electronic components1.6Materials and processes1.7Software and obsolescence1.8Costs of obsolescence1.9Cases from defence programmes1.10Case study: impact of obsolescence on a fleet
2.1IEC 62402 obsolescence management2.2Obsolescence management plan2.3Component monitoring2.4End-of-life forecasting2.5Life-cycle databases2.6PCN and PDN notices2.7Obsolescence risk analysis2.8Component prioritisation2.9Indicators2.10Workshop: obsolescence management plan
3.1Last-time buy3.2Substitution with equivalents3.3Emulation and reverse engineering3.4Licensed manufacturing3.5Authorised aftermarket manufacturers3.6Component reclamation3.7Partial redesign3.8Planned technology refreshes3.9Cost-benefit analysis3.10Practical exercise: selecting a strategy for a component
4.1Degradation in storage4.2Moisture sensitivity4.3Controlled-atmosphere packaging4.4IEC 62435 standards4.5Solderability after storage4.6Periodic inspections4.7Inventory management4.8Storage costs4.9Warehouse security4.10Lab: solderability test of stored components
5.1Counterfeit components5.2SAE AS55535.3SAE AS6081 and AS61715.4Authenticity inspection and testing5.5Authorised distributors5.6Traceability5.7Geopolitical risks5.8Critical raw materials5.9EU Critical Raw Materials Regulation5.10Case study: detecting a counterfeit component
6.1Open architectures6.2Modularity6.3Component selection6.4Use of COTS6.5Legacy software management6.6Technical documentation6.7Intellectual property rights6.8Upgrade planning6.9Configuration management6.10Practical exercise: design review against obsolescence
7.1Obsolescence clauses7.2Availability-based contracts7.3Customer-supplier collaboration7.4User groups7.5Allied interoperability7.6NATO standards7.7Budgeting7.8Risk management7.9Ethics and sustainability7.10Case study: obsolescence clause in a contract
8.1System selection8.2Component inventory8.3Risk analysis8.4Resolution strategies8.5Storage plan8.6Anti-counterfeit plan8.7Contractual plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SiliconExpert, IHS Markit Parts Management, SAP, Microsoft Power BI and Siemens Teamcenter, in free, academic or evaluation versions. Real procedures are studied, including obsolescence risk analyses, solderability tests after storage and component authenticity inspections. Assessment is continuous by module, plus the final capstone project.
Standards covered: IEC 62402:2019, SAE AS5553, SAE AS6081, IEC 62435, SD-22, Regulation (EU) 2024/1252, J-STD-020.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SiliconExpert, IHS Markit Parts Management, SAP, Microsoft Power BI, Siemens Teamcenter, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Human-Machine Interfaces on the Ship’s Bridge
Online postgraduate diploma of 800 hours in human-machine interfaces on the ship's bridge. 8 modules covering the bridge, maritime human factors, display systems, interface design, automation…
Diploma in Chemical Compatibility of Materials and Coolants
Online postgraduate diploma of 800 hours in chemical compatibility of materials and coolants. 8 modules covering coolant chemistry, high-temperature water corrosion, liquid metals, molten salts, gas…
Diploma in Weld Integrity under Irradiation
Online postgraduate diploma of 800 hours in weld integrity under irradiation: 8 modules covering irradiation damage in metals, welding metallurgy, reactor vessel embrittlement, stress corrosion cracking,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships