Diploma in Lighting, Tyres and Night/Weather Driving
Online postgraduate diploma of 800 hours in lighting, tyres and night/weather driving. 8 modules covering night and adverse-weather driving, lighting technology and installation, tyres, climate preparation, human factors and validation, with an assigned technical tutor.
Diploma in Lighting, Tyres and Night/Weather Driving — studying from Australia
Restoration of classic vehicles and heritage machinery is a valued pursuit in Australia, supported by active car clubs, museums and a dedicated enthusiast community. Engineers and skilled restorers work on historical preservation, parts sourcing, engine rebuilding and compliance with vehicle registration requirements. The heritage and collectable vehicle market supports specialist workshops, parts suppliers and appraisal services. Employers include restoration workshops, museums, specialist importers and heritage organisations.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this training recognised by any Australian heritage or automotive restoration body?
SEIUM qualifications are private and not accredited by any Australian national body or heritage authority. Recognition is decided by employers and individual clients. Heritage listings and vehicle registration are governed by state authorities, so check their requirements separately if they affect your work.
Which Australian businesses might employ restoration specialists with this training?
Classic car restoration workshops, heritage vehicle dealers, museums, and specialist parts suppliers are examples of Australian employers and clients in this area. Hiring decisions rest with each business. A strong restoration portfolio and practical experience are typically more persuasive than a private qualification.
Can I study from Australia while keeping my current work, and can it be funded?
Yes, the programmes are fully online and taught in English, so you can study from Australia without a student visa and around your existing work. Fees are payable in instalments, and employer sponsorship is possible. Check the total hours and build a schedule you can sustain.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the demands of night and adverse-weather driving.
Select suitable lighting technologies.
Install auxiliary lighting safely and legally.
Choose tyres according to climate and terrain.
Prepare the vehicle for extreme weather conditions.
Integrate human factors into night driving.
Validate solutions through testing.
Who it's for
- Vehicle lighting engineers.
- Expedition vehicle builders.
- Off-road competition technicians.
- Climatic validation engineers.
- Technical tyre advisers.
- Off-road driving instructors.
- Engineering or science graduates seeking to enter off-road competition.
What you'll work with
- UNECE Regulation R48 (installation of lighting and light-signalling devices)
- UNECE Regulation R112 (headlamps with asymmetrical beams)
- UNECE Regulation R10 (electromagnetic compatibility)
- UNECE Regulation R54 (tyres for commercial vehicles)
- IEC 60529 (IP degrees of protection)
- FIA Appendix J, Article 283 (safety equipment for cross-country vehicles)
- ISO 20653 (road vehicles, degrees of protection)
- Synopsys LucidShape
- DIALux evo
- MATLAB
- SolidWorks
8 modules
1.1Night-time visibility and perception1.2Driver visual fatigue1.3Glare and contrast1.4Fog, dust and rain1.5Snow and ice1.6Extreme temperatures1.7Demands of rally raid and expeditions1.8Night-related accidents1.9Competition regulations1.10Workshop: analysis of the visibility conditions of a stage
2.1Halogen, HID and LED2.2Reflector and projector optics2.3Long-range and wide-coverage beams2.4Colour temperature2.5LED thermal management2.6Power consumption and the electrical system2.7Basic photometry2.8Optical design with LucidShape2.9UNECE Regulations R48 and R1122.10Practical exercise: calculating the range of an auxiliary lamp
3.1Light bars and mounts3.2Aiming and adjustment3.3Wiring, relays and fuses3.4IP67 sealing3.5Impact protection3.6Work and service lighting3.7Electromagnetic compatibility under UNECE R103.8Roadworthiness inspection3.9Safety requirements in competition3.10Workshop: installing a light bar
4.1All-terrain and mud tyres4.2Winter tyres and sipes4.3Compounds for low temperatures4.4Tyres and rain4.5Studs and chains4.6Pressures according to temperature4.7UNECE Regulation R54 and markings4.8Accelerated wear in heat4.9Selection by stage4.10Case study: choosing tyres for a winter rally
5.1Climate control and demisting5.2Windscreen wipers and headlamp washers5.3Cabin dust filtration5.4Cabin heating in extreme cold5.5Protection of electrical components5.6Batteries and cold5.7Cold starting5.8Thermal management in heat5.9Survival equipment5.10Practical exercise: preparing a vehicle for extreme cold
6.1Dark adaptation6.2Use of interior lighting6.3Night navigation with a road book6.4Pace and fatigue management6.5Driver–co-driver communication6.6Reading the terrain at night6.7Rest planning6.8Specific training6.9Safety protocols6.10Workshop: night navigation drill
7.1Photometric tests7.2Night track measurements7.3Climatic chamber tests7.4Water and dust tests7.5Lamp vibration tests7.6Comparison of configurations7.7Driver feedback7.8Documentation7.9Continuous improvement7.10Lab: lighting map on a night track
8.1Definition of the vehicle and the event8.2Analysis of conditions8.3Lighting design8.4Tyre selection8.5Climate preparation8.6Human factors plan8.7Validation plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Synopsys LucidShape, DIALux evo, MATLAB and SolidWorks, in free, academic or evaluation versions. Procedures are studied on real cases of lighting maps on night tracks, preparation of vehicles for extreme cold and tyre selection for weather conditions. Assessment is continuous by module plus the final project.
Standards covered: UNECE Regulation R48, UNECE Regulation R112, UNECE Regulation R10, UNECE Regulation R54, IEC 60529, FIA Appendix J, Article 283, ISO 20653.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Synopsys LucidShape, DIALux evo, MATLAB, SolidWorks, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Auxiliary Electrical Systems: Winches, Lighting and 12V
Online 800-hour Postgraduate Diploma in Auxiliary Electrical Systems: Winches, Lighting and 12V. 8 modules covering ISO 6722-1 (electrical cables for vehicles), ISO 8820 (fuses for road…
Diploma in Brake Boosters, Master Cylinders and Friction Materials
Online postgraduate diploma of 800 hours in brake boosters, master cylinders and friction materials: 8 modules covering brake hydraulics, master cylinders, brake boosters, friction materials, discs,…
Diploma in Structural Adhesives in Restoration
Online postgraduate diploma of 800 hours in structural adhesives in restoration. 8 modules covering adhesion science, structural adhesive families, surface preparation, bodywork applications, heritage restoration, testing…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships