Diploma in AXI/DMA Buses and Heterogeneous Platforms
Online postgraduate diploma of 800 hours in AXI/DMA Buses and Heterogeneous Platforms: 8 modules covering heterogeneous SoC architecture, AMBA AXI protocols, interconnect and IP design, DMA engines, platform software, hardware acceleration and platform validation, with an assigned technical tutor.
Diploma in AXI/DMA Buses and Heterogeneous Platforms — studying from Australia
Electronics and embedded systems underpin a wide range of Australian industries, including defence, mining automation, medical devices and consumer technology. The telecommunications sector is significant, with ongoing investment in fibre, mobile networks and satellite communications for remote regions. Research organisations such as CSIRO and university groups contribute to advances in sensing, communications and signal processing. Engineers typically work on hardware design, firmware development, testing and certification. Employers include telecommunications carriers, defence contractors, instrumentation companies and product manufacturers.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this qualification recognised for electronics engineering in Australia?
SEIUM's qualifications are private and not official state degrees, and they are not accredited by Engineers Australia or the Australian Communications and Media Authority. Recognition for electronics and telecom roles generally depends on accredited degrees, licences and experience. Employers or the relevant body make the final decision.
Which Australian employers hire embedded and telecom engineers?
Australia has telecommunications carriers, defence electronics firms, medical device makers, mining technology companies and IoT developers. Employers mostly assess your hands-on skills, project record and certifications. Ask prospective employers whether they would consider a private online qualification.
Can I study this part-time while working, and how is it supported?
The courses are 100% online and taught in English, so you can study from anywhere in Australia without needing a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. Each student has an assigned technical tutor, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the architecture of heterogeneous SoCs with programmable logic.
Design peripherals compliant with the AMBA AXI protocols.
Integrate IP using interconnects and converters in IP Integrator.
Configure DMA engines for high-performance transfers.
Develop Linux software that manages DMA and accelerators.
Optimise partitioning and host-accelerator transfers.
Validate the end-to-end performance of a heterogeneous platform.
Who it's for
- FPGA engineers who integrate custom IP on Zynq, Versal or Agilex devices.
- SoC architects defining interconnect, memory maps and data paths.
- Heterogeneous embedded systems engineers combining processors and programmable logic.
- Hardware accelerator developers seeking to move data efficiently.
- DMA driver engineers working at the hardware-software boundary.
- Hardware-software integration engineers responsible for platform bring-up.
- Engineering or science graduates looking to enter the semiconductor industry.
What you'll work with
- AMBA AXI and ACE Protocol Specification – ARM IHI 0022 (on-chip memory-mapped and coherent interfaces)
- AMBA AXI4-Stream Protocol Specification – ARM IHI 0051 (streaming data interface)
- AMBA APB Protocol Specification – ARM IHI 0024 (low-power peripheral bus)
- PCI Express Base Specification 5.0 (high-speed host interconnect)
- OpenCL 3.0 – Khronos Group (heterogeneous parallel programming)
- IEEE 1800-2017 (SystemVerilog hardware design and verification language)
- Devicetree Specification v0.4 (hardware description for operating systems)
- Vivado IP Integrator
- AMD Vitis
- PetaLinux
- Xilinx Runtime (XRT)
- Intel Quartus Prime
8 modules
1.1CPU, FPGA, GPU and accelerators on a single chip1.2Zynq UltraScale+, Versal and Agilex families1.3Memory hierarchy and coherency1.4On-chip interconnect and topologies1.5Hardware/software partitioning1.6Memory map and address space1.7Power and clock domains1.8Performance: bandwidth and latency1.9Use cases: vision, radio and control1.10Case study: analysis of a Zynq MPSoC
2.1AXI4 channels and valid-ready handshake2.2Bursts, sizes and alignment2.3IDs, ordering and outstanding transactions2.4AXI4-Lite for control registers2.5AXI4-Stream and TLAST signalling2.6Error responses and protection2.7APB and AHB for slow peripherals2.8ACE and cache coherency2.9Verification with protocol VIP2.10Lab: AXI4-Lite slave with a register bank
3.1Crossbar and SmartConnect interconnects3.2Width and clock conversion3.3Register slices and timing closure3.4Designing AXI masters in RTL3.5IP packaging in IP Integrator3.6Quality of service and arbitration3.7Debugging with ILA and AXI monitors3.8Measuring real throughput3.9Typical integration errors3.10Practical: AXI burst read master
4.1DMA concepts and descriptors4.2AXI DMA in simple and scatter-gather mode4.3AXI VDMA for video streams4.4Multichannel DMA and queues4.5Interrupts and coalescing4.6Double buffering and ping-pong schemes4.7Alignment and memory requirements4.8Performance and bottlenecks4.9Designing a custom DMA4.10Lab: streaming transfer with AXI DMA
5.1Linux drivers for the DMA engine5.2UIO and VFIO for user space5.3Cache coherency and dma_alloc_coherent5.4CMA contiguous memory and shared buffers5.5dma-buf for sharing between subsystems5.6Bare-metal and vendor libraries5.7Device tree for programmable-logic IP5.8Dynamic loading of bitstreams and overlays5.9Inter-core communication with OpenAMP5.10Practical: user-space driver for an accelerator
6.1Acceleration model with Vitis and XRT6.2OpenCL kernels and buffer management6.3Command queues and asynchronous execution6.4Optimising host-accelerator transfers6.5PCIe and data-centre accelerators6.6AI Engines on Versal6.7Profiling with Vitis Analyzer6.8Comparison of CPU, GPU and FPGA6.9Partitioning algorithms across resources6.10Workshop: matrix multiplication accelerator
7.1Build flow with PetaLinux or Yocto7.2Interconnect stress testing7.3Data coherency and consistency7.4End-to-end latency measurement7.5Error handling and recovery7.6Power consumption and thermal management7.7Isolation with SMMU and TrustZone7.8Platform documentation7.9IP version maintenance7.10Case study: video pipeline with VDMA and Linux
8.1Definition of the acceleration use case8.2Hardware architecture and memory map8.3IP design with AXI interfaces8.4DMA engine and data flow8.5Control software on Linux8.6Performance measurements and comparison8.7Functional validation of the system8.8Technical documentation of the system8.9Report and presentation8.10Final project: final review with your tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine it with your job.
Each module combines theory, guided reading of the original specification and applied exercises. The working software is Vivado IP Integrator, AMD Vitis, PetaLinux, Xilinx Runtime (XRT) and Intel Quartus Prime, in free, academic or evaluation versions. Testing is studied through real procedures: throughput measurement in DMA transfers, AXI IP integration on Zynq and accelerator profiling with Vitis. Assessment is continuous, module by module, plus the final project.
Standards covered: AMBA AXI and ACE Protocol Specification (ARM IHI 0022), AMBA AXI4-Stream Protocol Specification (ARM IHI 0051), AMBA APB Protocol Specification (ARM IHI 0024), PCI Express Base Specification 5.0, OpenCL 3.0 (Khronos Group), IEEE 1800-2017 (SystemVerilog) and Devicetree Specification v0.4.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Vivado IP Integrator, AMD Vitis, PetaLinux, Xilinx Runtime (XRT) and Intel Quartus Prime, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Precision Pressure/Temperature Measurement
Online postgraduate diploma of 800 hours in precision pressure/temperature measurement. 8 modules covering pressure and temperature metrology, temperature and pressure sensors, precision signal conditioning, laboratory calibration,…
Postgraduate Diploma in Laboratories, Dossiers and Audits
Online 800-hour Postgraduate Diploma in Laboratories, Dossiers and Audits. 8 modules covering ISO/IEC 17025, ISO 19011 and LabWare LIMS. Dedicated tutor and open enrolment.
Postgraduate Diploma in Key Management and Cryptography in Devices
Online 800-hour Postgraduate Diploma in Key Management and Cryptography in Devices. 8 modules covering NIST SP 800-57 Part 1, FIPS 140-3 and OpenSSL. Assigned tutor and…
More in Electronics, Embedded Systems & Telecom
All Electronics, Embedded Systems & Telecom programmes → · How to apply · Fees & financing · Scholarships