Course on runway and taxiway design
Online course of 300 hours in runway and taxiway design. 6 modules covering runway geometry, taxiways and aprons, airport pavements, markings and lighting and obstacles and runway safety, with an assigned technical tutor.
Course on runway and taxiway design — studying from Australia
Australia's aerospace sector spans defence and commercial aviation, maintenance, repair and overhaul, and a growing space industry. Key clusters sit around Adelaide's Edinburgh Parks and the Melbourne and Sydney defence precincts, with major employers including Airbus Australia Pacific, BAE Systems Australia, Boeing Defence Australia and Lockheed Martin Australia. Recreational and commercial drone operations are increasingly regulated, and advanced air mobility is emerging as a research and policy priority. Engineers working in this area typically support airworthiness, systems integration, structures and avionics across both crewed and uncrewed platforms.
Fees for Australia: A$1,270 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification help me get recognised by a professional body in Australia?
SEIUM qualifications are private qualifications, not official state degrees, and they are not accredited by any Australian body. Engineers Australia accredits university engineering degrees, and the Civil Aviation Safety Authority (CASA) regulates drone and aviation operations. Recognition of a private qualification is decided by the employer or the relevant body, so check with them before enrolling.
Will this course help me find work in Australian aerospace, drones or space?
Australia has aerospace and defence employers, drone operators and space-sector companies, and skills in these areas are valued. Whether a SEIUM qualification counts for a given role depends on the employer, who will usually weigh your experience and portfolio alongside any private credential. Ask prospective employers how they view it.
Can I study this part-time while working, and does the time zone suit Australia?
The programmes are fully online and taught in English, so you can study from anywhere in Australia, with no student visa needed for home study. Master's programmes total 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours, so plan your weekly load realistically. Fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Determine runway dimensions from the critical aircraft.
Calculate declared distances and corrected lengths.
Design taxiway and apron systems in accordance with Annex 14.
Design airport pavements using the ACR and PCR method.
Plan the markings and lighting of the movement area.
Assess limitation surfaces and deviations through aeronautical studies.
Prepare the preliminary design of a runway and its taxiway system.
Who it's for
- Airport design engineers.
- Pavement designers.
- Aerodrome certification technicians.
- Airfield lighting engineers.
- Movement area inspectors.
- Airport infrastructure consultants.
- Engineering or science graduates aiming to join airport operators.
What you'll work with
- Annex 14 to the Chicago Convention, Volume I. Aerodrome Design and Operations (ICAO aerodrome design standards)
- ICAO Doc 9157 Aerodrome Design Manual (ICAO guidance on aerodrome design)
- EASA CS-ADR-DSN Certification Specifications for Aerodrome Design (EASA aerodrome design specifications)
- FAA AC 150/5300-13B Airport Design (FAA airport geometric design standards)
- FAA AC 150/5320-6G Airport Pavement Design and Evaluation (FAA pavement design and evaluation)
- ICAO Doc 9981 PANS-Aerodromes (procedures for aerodrome operations)
- Regulation (EU) 139/2014 on aerodrome requirements (EU aerodrome certification and operation)
- FAARFIELD
- AutoCAD Civil 3D
- Transoft AeroTURN
- COMFAA
6 modules
1.1Reference code number and code letter1.2Runway length and corrections for altitude and temperature1.3Declared distances TORA, TODA, ASDA and LDA1.4Runway width and shoulders1.5Longitudinal and transverse slopes1.6Runway strips and graded area1.7Stopways and clearways1.8Runway end safety areas (RESA)1.9Displaced thresholds and their effect1.10Practical: calculating declared distances
2.1Taxiway width and shoulders2.2Minimum runway-taxiway separations2.3Taxiway curves and widening2.4Rapid exit taxiways2.5Holding points and stop bars2.6Aircraft stand taxilanes2.7Apron design and clearances2.8Hot spots and runway incursion prevention2.9Taxiing of code letter F aircraft2.10Workshop: layout of a rapid exit taxiway
3.1Flexible and rigid pavements3.2ACR and PCR reporting method3.3Design traffic and fleet mix3.4Design with FAARFIELD3.5Pavement materials and layers3.6Joints and concrete slabs3.7Friction and surface texture3.8Grooving and surface drainage3.9Structural evaluation with HWD deflectometer3.10Lab: design of a flexible pavement
4.1Runway markings4.2Taxiway and apron markings4.3Edge, centreline and touchdown zone lights4.4Approach lighting systems4.5PAPI and visual approach angle4.6Mandatory instruction and information signs4.7Runway guard lights4.8Surface guidance with A-SMGCS4.9Secondary power supplies4.10Practical: lighting plan for a threshold
5.1Obstacle limitation surfaces5.2Aeronautical assessment of obstacles5.3ILS critical and sensitive areas5.4Aeronautical studies of deviations5.5Runway excursions and mitigation measures5.6EMAS arresting systems5.7Global Reporting Format (GRF)5.8Runway condition codes (RWYCC)5.9Movement area inspections5.10Case study: aeronautical study of a reduced RESA
6.1Aerodrome baseline data6.2Critical aircraft and fleet mix6.3Runway length and orientation6.4Proposed taxiway system6.5Pavement design6.6Marking and lighting plan6.7Check of obstacle surfaces6.8Drawings and estimated budget6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so the programme can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is FAARFIELD, AutoCAD Civil 3D, Transoft AeroTURN and COMFAA, in free, academic or evaluation versions. Exercises are based on real procedures: design of an airport pavement, taxiway layout with path simulation and an aeronautical study of a design deviation. Assessment is continuous by module, plus the final project.
Standards covered: Annex 14 to the Chicago Convention, Volume I. Aerodrome Design and Operations, ICAO Doc 9157 Aerodrome Design Manual, EASA CS-ADR-DSN Certification Specifications for Aerodrome Design, FAA AC 150/5300-13B Airport Design, FAA AC 150/5320-6G Airport Pavement Design and Evaluation, ICAO Doc 9981 PANS-Aerodromes, Regulation (EU) 139/2014 on aerodrome requirements.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with FAARFIELD, AutoCAD Civil 3D, Transoft AeroTURN and COMFAA, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need an internet connection, a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Radiator and MLI course in space
Online course of 300 hours in space radiators and MLI, structured in 6 modules covering thermal radiation on space surfaces, radiator design, multilayer insulation, manufacturing and…
MPC course applied to satellites
Online course of 300 hours in MPC applied to satellites: 6 modules covering predictive control principles, optimisation for MPC, attitude MPC, orbital and proximity MPC and…
Battery course in urban air mobility
Online course of 300 hours in batteries for urban air mobility: 6 modules covering battery electrochemistry, battery pack design, the battery management system, thermal management and…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships