Course on inspection of power lines with drones
Online course of 300 hours in power line inspection with drones. 6 modules covering electrical networks, inspection sensors, flight operations near lines, defect detection and maintenance management under Regulation (EU) 2019/947, Royal Decree 223/2008 and Royal Decree 614/2001, with DJI Pilot 2, FLIR Thermal Studio, Pix4Dmapper and Ultralytics YOLO, with an assigned technical tutor.
Course on inspection of power lines with drones — studying from Australia
Australia's aerospace sector spans defence and commercial aviation, maintenance, repair and overhaul, and a growing space industry. Key clusters sit around Adelaide's Edinburgh Parks and the Melbourne and Sydney defence precincts, with major employers including Airbus Australia Pacific, BAE Systems Australia, Boeing Defence Australia and Lockheed Martin Australia. Recreational and commercial drone operations are increasingly regulated, and advanced air mobility is emerging as a research and policy priority. Engineers working in this area typically support airworthiness, systems integration, structures and avionics across both crewed and uncrewed platforms.
Fees for Australia: A$1,180 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification help me get recognised by a professional body in Australia?
SEIUM qualifications are private qualifications, not official state degrees, and they are not accredited by any Australian body. Engineers Australia accredits university engineering degrees, and the Civil Aviation Safety Authority (CASA) regulates drone and aviation operations. Recognition of a private qualification is decided by the employer or the relevant body, so check with them before enrolling.
Will this course help me find work in Australian aerospace, drones or space?
Australia has aerospace and defence employers, drone operators and space-sector companies, and skills in these areas are valued. Whether a SEIUM qualification counts for a given role depends on the employer, who will usually weigh your experience and portfolio alongside any private credential. Ask prospective employers how they view it.
Can I study this part-time while working, and does the time zone suit Australia?
The programmes are fully online and taught in English, so you can study from anywhere in Australia, with no student visa needed for home study. Master's programmes total 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours, so plan your weekly load realistically. Fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the components and typical defects of power lines.
Select the right sensors for each type of inspection.
Plan safe flights in the vicinity of conductors.
Interpret thermograms and corona discharge detections.
Apply computer vision for automatic defect detection.
Integrate results into predictive maintenance plans.
Assess the occupational and operational risks of inspection.
Who it's for
- Drone pilots inspecting electrical networks.
- Thermography technicians.
- Inspection data analysts.
- Line maintenance engineers.
- Applied computer vision specialists.
- Drone operations coordinators.
- Engineering or science graduates looking to enter electricity transmission.
What you'll work with
- Implementing Regulation (EU) 2019/947 (rules and procedures for UAS operation)
- Royal Decree 223/2008 (Spanish regulation on high-voltage overhead lines)
- Royal Decree 614/2001 (protection of workers against electrical risk)
- ISO 18436-7 (qualification of thermography personnel)
- UNE-EN 50341-1 (overhead electrical lines exceeding 1 kV AC)
- IEEE 516 (maintenance methods on energised power lines)
- Royal Decree 517/2024 (Spanish UAS regulation)
- DJI Pilot 2
- FLIR Thermal Studio
- Pix4Dmapper
- Ultralytics YOLO
- ArcGIS Pro
6 modules
1.1Architecture of transmission and distribution networks1.2Components: towers, conductors, insulators and fittings1.3Typical defects and failure modes1.4Traditional inspection by helicopter and on foot1.5Advantages of UAVs in predictive maintenance1.6Safety distances and electromagnetic fields1.7Vegetation management in rights of way1.8Quality of service indicators1.9Utility maintenance plans1.10Case study: analysis of an annual inspection plan
2.1High-resolution cameras with optical zoom2.2Thermography of connections and hot spots2.3Corona discharge detection with UV cameras2.4LiDAR for vegetation clearance distances2.5Insulator inspection cameras2.6Electromagnetic field sensors2.7Dual gimbal configuration2.8Radiometric calibration2.9Platform selection: multirotor or fixed-wing2.10Lab: interpreting thermograms of splices
3.1Magnetic interference with the compass3.2Electromagnetic compatibility near conductors3.3Manual versus automated flights3.4Automatic line following3.5BVLOS operations in corridors3.6Standard scenarios and authorisations3.7Coordination with grid control centres3.8Emergency procedures3.9Operational teams and roles3.10Practical exercise: SORA risk assessment for a high-voltage corridor
4.1Organising data by span and tower4.2Computer vision for defect detection4.3Neural networks for damaged insulators4.4Thermographic analysis according to standards4.5Calculation of conductor-to-vegetation distances4.6Sag modelling according to temperature4.7Criticality classification4.8Digital twin of the line4.9Integration with corporate GIS systems4.10Workshop: training an insulator detector with YOLO
5.1Prioritisation of corrective actions5.2Condition-based maintenance5.3Costs and return on investment5.4Integration with asset management systems5.5Inspection performance indicators5.6Drones in autonomous docking stations5.7Procurement of inspection services5.8Occupational safety in work at height5.9Trends: line robots and contact drones5.10Case study: reducing faults through UAV inspection
6.1Selection of the line section6.2Risk analysis and permits6.3Sensor configuration6.4Flight planning6.5Simulated data capture6.6Defect detection and classification6.7Criticality report6.8Proposed maintenance plan6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original regulations and applied exercises. The working software is DJI Pilot 2, FLIR Thermal Studio, Pix4Dmapper, Ultralytics YOLO and ArcGIS Pro, in free, academic or evaluation versions. Practical work is based on real procedures for thermographic inspection of connections, automatic defect detection on insulators and LiDAR measurement of vegetation clearance. Assessment is continuous by module, plus the final capstone project.
Standards covered: Implementing Regulation (EU) 2019/947, Royal Decree 223/2008 (high-voltage lines regulation), Royal Decree 614/2001 (electrical risk), ISO 18436-7, UNE-EN 50341-1, IEEE 516, Royal Decree 517/2024.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with DJI Pilot 2, FLIR Thermal Studio, Pix4Dmapper, Ultralytics YOLO and ArcGIS Pro, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required: you need an internet connection, a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Course on digital modeling of critical systems
Online course of 300 hours in digital modelling of critical systems. 6 modules covering model-based design, formal verification, co-simulation, digital twins and model credibility with an…
Space Environmental Audit Course
Online course of 300 hours in space environmental auditing. 6 modules covering the environmental impact of the space sector, environmental management systems, life cycle assessment, audit…
AIT satellite course
Online course of 300 hours in satellite AIT (assembly, integration and testing). 6 modules covering the AIT cycle in space programmes, facilities and controlled environments, mechanical…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships