Course in Superconducting Technologies in Fusion
Online 300-hour course in superconducting technologies in fusion. 6 modules covering IEC 61788-1 (critical current in Nb-Ti conductors), IEC 61788-2 (critical current in Nb3Sn conductors) and COMSOL Multiphysics (AC/DC). Assigned tutor and open enrolment.
Course in Superconducting Technologies in Fusion — studying from Australia
Australia does not operate nuclear power plants, but nuclear science and technology play important roles in research, medicine, mining and regulation. The Australian Nuclear Science and Technology Organisation operates research reactors and produces radiopharmaceuticals, while uranium mining is conducted in South Australia, the Northern Territory and Queensland. Nuclear engineering skills support regulatory oversight, radiation safety and decommissioning activities. Employers include ANSTO, the Australian Radiation Protection and Nuclear Safety Agency, mining companies and specialist consultancies.
Fees for Australia: A$868 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does this programme meet Australian nuclear licensing or regulatory requirements?
No. SEIUM qualifications are private and are not accredited by any national body. Nuclear activities in Australia are regulated by the Australian Radiation Protection and Nuclear Safety Agency and related authorities, which set their own competency requirements. Check directly with the regulator and your employer about any qualifications needed for a specific role.
Which Australian organisations might consider this training for nuclear-related roles?
Australian employers in this area include research organisations, radiation protection services, mining and resources companies, and consultancies working on nuclear-related projects. Hiring depends on each organisation's requirements and on security and licensing needs. A private qualification is unlikely to be sufficient alone, so combine it with relevant experience.
Is the programme workable alongside a job, and how is it funded?
The programmes are delivered entirely online in English with an assigned technical tutor, allowing study from Australia around work commitments. Fees can be paid in instalments, and employer sponsorship is possible. Review the programme length, from 300 to 1,900 hours, and plan carefully.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the fundamentals of applied superconductivity.
Compare low- and high-critical-temperature superconductors.
Conceptually design toroidal and poloidal field coils.
Analyse quench detection and protection.
Size cryogenic cooling systems.
Interpret critical current measurements according to IEC 61788.
Assess the role of REBCO superconductors in compact tokamaks.
Who it's for
- Superconducting magnet engineer who wants to specialise in Superconducting Technologies in Fusion.
- Cryogenic engineer who wants to specialise in Superconducting Technologies in Fusion.
- Superconducting materials researcher who wants to specialise in Superconducting Technologies in Fusion.
- Magnet protection engineer who wants to specialise in Superconducting Technologies in Fusion.
- Fusion magnet researcher who wants to specialise in Superconducting Technologies in Fusion.
- Cryogenic test technician who wants to specialise in Superconducting Technologies in Fusion.
- Engineering or science graduates seeking to enter nuclear fusion.
What you'll work with
- IEC 61788-1 (critical current in Nb-Ti conductors)
- IEC 61788-2 (critical current in Nb3Sn conductors)
- IEC 60050-815 (superconductivity vocabulary)
- ISO 21009 (static cryogenic vessels)
- EN 13458 (vacuum-insulated cryogenic vessels)
- ASME BPVC Section III, Division 4 (fusion devices)
6 modules · 300 h
1.1Zero resistance and the Meissner effect1.2Type I and type II superconductors1.3Critical temperature, field and current density1.4Critical surface and vortex pinning1.5BCS theory and coherence length1.6Low-temperature superconductors: NbTi and Nb3Sn1.7High-temperature superconductors: REBCO and Bi-22121.8MgB2 and intermediate applications1.9Strain dependence in Nb3Sn1.10Practice: reading Jc(B,T) curves of conductors
2.1ITER cable-in-conduit conductors (CICC)2.2Multifilamentary wires and copper stabiliser2.3REBCO tapes and VIPER and CroCo cables2.4AC losses and coupling2.5Cryogenic stability and temperature margin2.6Current sharing and resistive transition2.7Superconducting joints and splices2.8Reaction heat treatment of Nb3Sn2.9Qualification tests at SULTAN2.10Workshop: calculating the temperature margin of a CICC
3.1Toroidal and poloidal field coils3.2Central solenoid and magnetic flux3.3Electromagnetic loads and Lorentz forces3.4Mechanical structure and coil cases3.5Electrical insulation and epoxy materials3.6Toroidal field ripple3.7High-field HTS magnets: SPARC3.8Magnet design for stellarators: W7-X3.9Error field correction coils3.10Case study: sizing a TF coil
4.1Supercritical helium cooling4.2Cryogenic plants and distribution4.3Thermal shields and cryostat4.4Nuclear heat load on the magnets4.5Quench detection and response times4.6Fast discharge and dump resistors4.7Heating and pressure during quench4.8Protection of HTS magnets: partial insulation4.9Cryogenic and diagnostic instrumentation4.10Laboratory: quench propagation simulation
5.1ITER magnets: manufacturing and lessons learned5.2JT-60SA and the manufacture of NbTi coils5.3EAST and KSTAR as superconducting tokamaks5.4Wendelstein 7-X and non-planar coils5.5SPARC and the 20 T TF magnet5.6European DEMO and CFETR programmes5.7Neutron irradiation damage in superconductors5.8Power supplies and switching5.9Costs and supply chain5.10Case study: testing the SPARC TF model coil
6.1Definition of device requirements6.2Superconductor selection6.3Conductor and cable design6.4Field and force calculation6.5Mechanical coil design6.6Cryogenic cooling scheme6.7Quench protection system6.8Technical risk assessment6.9Report and presentation6.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The software used is COMSOL Multiphysics (AC/DC), Opera (Simulia), ROXIE, THEA (CryoSoft), ANSYS Mechanical, in free, academic or evaluation versions. Tests are studied using real procedures for critical current measurements, quench tests on prototype magnets and cryogenic characterisation. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the fundamentals of applied superconductivity.
Compare low- and high-critical-temperature superconductors.
Conceptually design toroidal and poloidal field coils.
Analyse quench detection and protection.
Size cryogenic cooling systems.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with COMSOL Multiphysics (AC/DC), Opera (Simulia), ROXIE, THEA (CryoSoft) and ANSYS Mechanical. Free, academic or evaluation versions are used, and the tutor will indicate the free alternative where one exists.
A SEIUM Institute diploma upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Course on Collaborative Robots in Nuclear Laboratories
Online course of 300 h in Collaborative Robots in Nuclear Laboratories. 6 modules covering ISO 10218-1 and 10218-2 (safety of industrial robots), ISO/TS 15066 (collaborative robots)…
Course in Chemical and Physical Decontamination Strategies
Online 300-hour course in chemical and physical decontamination strategies. 6 modules covering ISO 7503 (surface contamination measurement), IAEA GSR Part 6 (decommissioning of facilities) and VISIPLAN.…
Course in Neutronic Modelling in Complex Geometries
Online 300-hour course in neutronic modelling in complex geometries. 6 modules covering ANSI/ANS-10.4 (V&V of nuclear scientific software), ANSI/ANS-8.24 (validation of neutron transport methods for criticality)…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships