Course in Preventive Maintenance of Steel Bridges
Online course of 300 hours in preventive maintenance of steel bridges, structured in 6 modules covering deterioration, maintenance planning, corrosion protection, inspection and maintenance interventions, with an assigned technical tutor.
Course in Preventive Maintenance of Steel Bridges — studying from Australia
Australia's infrastructure pipeline is substantial, covering roads, rail, ports, water and urban development across major cities such as Sydney, Melbourne, Brisbane and Perth. Rail engineering is especially active, with projects including Sydney Metro and Melbourne Metro. Smart city initiatives draw on sensors, data platforms and digital twins to improve transport, utilities and public services. Employers include state transport authorities, engineering consultancies such as Aurecon and WSP, and major contractors. Engineers work on design, asset management, construction oversight and sustainability.
Fees for Australia: A$1,270 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification meet Australian civil engineering registration requirements?
No. Civil engineers in Australia typically need an Engineers Australia accredited degree to pursue Chartered status, and state and territory rail and infrastructure regulators set their own requirements. SEIUM's private qualifications are not accredited by these bodies, so employers or regulators decide how much weight they carry.
Which Australian employers hire in civil, rail and smart cities?
Australia has public infrastructure agencies, rail operators, engineering consultancies and councils working on urban and smart city projects. Employers usually prioritise accredited qualifications, licensing and project experience. Ask potential employers whether a private online qualification would be considered alongside your experience.
Is the course workable alongside work, and what does it cost?
The courses are 100% online and taught in English, so you can study from anywhere in Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900, so plan your time accordingly. Fees are payable in instalments, employer sponsorship may be possible, and you will have an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the deterioration mechanisms of steel bridges.
Plan long-term preventive maintenance.
Specify corrosion protection systems.
Inspect steel elements and connections.
Carry out maintenance interventions safely.
Assess life cycle costs.
Draw up the maintenance plan for a steel bridge.
Who it's for
- Bridge maintenance technicians.
- Steel structure inspectors.
- Paint and coatings inspectors.
- Maintenance works site managers.
- Asset management engineers.
- Non-destructive testing technicians.
- Engineering or science graduates seeking to enter road maintenance.
What you'll work with
- EN ISO 12944-5 (corrosion protection of steel structures by protective paint systems)
- ISO 8501-1 (preparation of steel substrates: visual assessment of surface cleanliness)
- EN ISO 1461 (hot-dip galvanised coatings on fabricated iron and steel articles)
- EN 1090-2 (execution of steel structures: technical requirements)
- EN ISO 17640 (ultrasonic testing of welds)
- EN ISO 9934-1 (magnetic particle testing)
- EN ISO 2808 (paints and varnishes: determination of film thickness)
- SAP2000
- Microsoft Excel
- Elcometer ElcoMaster
- QGIS
6 modules
1.1Types of steel bridges1.2Historical and modern steels1.3Riveted, bolted and welded connections1.4Mechanisms of atmospheric corrosion1.5Corrosion in critical areas1.6Fatigue in details1.7Impact damage1.8Ageing of protection systems1.9Steel bridge heritage1.10Case study: deterioration of a 19th-century truss bridge
2.1Maintenance strategies2.2Preventive versus corrective maintenance2.3Inventory and management system2.4Inspection frequency2.5Condition indicators2.6Multi-year plans2.7Prioritisation with limited resources2.8Life cycle costs2.9Maintenance contracts2.10Practical exercise: ten-year maintenance plan
3.1Corrosivity categories3.2Surface preparation3.3Blast-cleaning grades3.4Paint systems and their durability3.5Hot-dip galvanising3.6Thermal spray metallising3.7Weathering steels3.8Thickness control3.9Partial and full repainting3.10Lab: measuring coating thickness and adhesion
4.1Visual inspection of corrosion4.2Thickness loss4.3Inspection of connections4.4Detection of fatigue cracks4.5Magnetic particle and penetrant testing4.6Ultrasonic testing of welds4.7Inspection of bearings and joints4.8Access with platforms and ropes4.9Inspection report4.10Practical exercise: inspection of a welded joint
5.1Cleaning and drainage5.2Replacement of bolts and rivets5.3Repair of fatigue cracks5.4Strengthening of corroded elements5.5Bearing replacement5.6Deck renewal5.7Environmental management of paint waste5.8Safety in maintenance work5.9Quality control5.10Case study: repainting a bridge over a river
6.1Description of the bridge6.2Inspection of current condition6.3Diagnosis6.4Preventive maintenance plan6.5Proposed protection system6.6Priority interventions6.7Life cycle costs6.8Safety plan6.9Report and presentation6.10Final project: final review with your tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standards and applied exercises. The working software is SAP2000, Microsoft Excel, Elcometer ElcoMaster and QGIS, in free, academic or evaluation versions. Cases are studied on real procedures such as paint thickness measurement, magnetic particle inspection and repainting planning. Assessment is continuous by module, plus the final project.
Standards covered: EN ISO 12944-5, ISO 8501-1, EN ISO 1461, EN 1090-2, EN ISO 17640, EN ISO 9934-1, EN ISO 2808.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SAP2000, Microsoft Excel, Elcometer ElcoMaster and QGIS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Course on Regulation in ITS and Smart Urban Mobility
Online course of 300 hours in ITS regulation and smart urban mobility: 6 modules covering mobility governance, regulation of new services, data and technology regulation, low-emission…
Course on Pathology and Repair in Existing Tunnels
Online course of 300 hours in pathology and repair of existing tunnels. 6 modules covering lining degradation, inspection and diagnosis, structural assessment, repair and strengthening techniques…
Lighting and Energy Course in Urban Tunnels
Online course of 300 hours in lighting and energy in urban tunnels. 6 modules covering lighting engineering applied to tunnels, lighting installation design, lighting regulation and…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships